Where is the cabin air filter installed in the Ford Fiesta?

Hello, this car does not come with an air conditioning filter, you need to buy your own installation, in front of the co-pilot ** channel, you must first remove the side cover of the channel, the cover plate is fixed with a buckle, you can use a small screwdriver, you can also move the cover plate a little bit You can see the cover plate as wide as the filter element, there are two filter elements, up and down arrangement, when installing, first plug in one and then use a small word to change the cone to the top of the second, the first one is on the top, the arrow direction of the filter element is towards the seat, and the air conditioning filter cover plate is covered.

Hello, the air filter element of this car is in the trim next to the co-pilot of the **channel, and the trim plate of the **channel needs to be removed.

The location of the air conditioning filter element of the Ford Fiesta car is in the passenger armrest box, which needs to be removed, and the armrest box will be seen.

The air conditioning filter of this Ford Fiesta is installed in the co-pilot's glove box, and it is relatively easy to replace.

Generally, the air conditioning filter element of the model is located in the glove box in front of the co-pilot, and the card slot can be seen after the glove box is removed.

Generally speaking, the air conditioner filter is generally installed under the cover behind the storage box in the passenger position, and you can see it when you open the textbook.

Hello, most of the filters of the air conditioning system of this car are from the blower on the back of the hand box

Hello, the air conditioning filter element of this car is behind the storage box in the passenger position, and it can be replaced with a new one when it is opened.

The Ford Fiesta air conditioning filter is behind the co-pilot's glove box, and the specific location and disassembly method are as follows:

1. First of all, open the glove box of Changan Ford Fiesta, as shown in the figure below.

2. Then remove the plastic damping buckles on both sides of the Changan Ford Fiesta car glove box, as shown in the figure below.

The carnival's air conditioning filter is located on the left under the co-pilot. The left piece is removed.

During the use of the automotive air conditioning system, air flows through the blower, the evaporation tank of the refrigeration system, the small water tank of the heating system, and the air duct. As long as the air conditioning system blower is turned on or the air intake mode is selected to circulate in the room, air will enter the aforementioned system, regardless of whether the refrigeration unit is used. As this air circulates, it accumulates a lot of dust, moisture, bacteria, and other dirt on the surface of these devices.

Over time, mold and other bacteria will breed, emit peculiar smells, and will cause damage and allergic reactions to the human respiratory system and **, which will directly affect the health of the occupants, and the air conditioning system itself will also cause poor refrigeration effect and small air volume and other failures.

Under the co-pilot's glove compartment.

According to the query of the public interest culture network, the Ford Fiesta air conditioning filter is under the co-pilot Kai shouting box, if you want to replace the air conditioning filter, you need to remove the interior plate under the co-pilot glove box.

1. First of all, open the glove box cover behind the co-pilot.

2. Find the fixed buckle on the right side of the glove box and pull it out forcefully. Remove the fastener from the glove compartment lid and let it detach.

3. Squeeze the two wild edges of the glove box with both hands and take off the glove box. Take down the glove box to see the cover plate of the air conditioner filter, press the two sides of the cover plate firmly to fix the buckles, and the cover plate can be removed.

4. Pull out the air conditioner filter to the outside. Turn in the new air conditioner filter and reverse it to its original position in the order of disassembly and assembly.