What should I do if the Epson L360 power supply keeps flashing?

Why does the Epson L360 power keep flashing may be caused by the following two reasons:

1. The printer has at least one ink cartridge running out. Epson color inkjet printers must be installed at the same time as color and black ink cartridges, and at the same time there is ink to work, so that on the one hand, the printing quality can be guaranteed, and on the other hand, it is also to avoid the nozzle being in a state of ink shortage for a long time and causing the nozzle to be blocked.

2. The printer is not loaded with paper or is out of paper.

Please refer to the table below for details

Epson's printer has a POST process, and the power light flashes normally when it is turned on.

If the boot is stable, it still flashes. Then it could be the following reasons.

1. Lack of paper. 2. Replace the ink cartridge.

3. Paper jam on the printer.

4. Japan**.

Check according to the situation.

Summary. 1. If the power light goes out and the ink lamp and the paper shortage lamp flash at the same time when the printer is turned on, the print head may not be able to return to its position because there are foreign objects inside the printer.

2. If it is a new product, please make sure that the blue tape inside and outside the product has been removed, turn off the power of the printer, open the printer cover, and take out the printing paper or other obstructions from the paper feeding channel.

3. Check whether the cartridge hatch cover is tightly closed: open the cartridge hatch cover, push the cartridge down until it locks into place (with a click), and close the cartridge hatch cover until it clicks.

4. Turn the printer back on and check whether the indicator status is back to normal.

Epson printer (Seiko Epson), also known as Seiko Epson or Epson, is a printer founded in 1942 and headquartered in Nagano Prefecture, Japan.

Epson L360 power light, water drop light and out of paper flashing.

Hello, it's a pleasure to be there for you.

1. If the power light goes out and the ink lamp and the paper shortage lamp flash at the same time when the printer is turned on, the print head may not be able to return to its position because there are foreign objects inside the printer. 2. If it is a new product, please make sure that the blue tape inside and outside the product has been removed, turn off the power of the printer, open the printer cover, and take out the printing paper or other obstructions from the paper feeding channel. 3. Check whether the cartridge hatch cover is tightly covered

Open the cartridge hatch cover, push the cartridge down until it locks into place (with a click), and close the cartridge hatch cover until it clicks. 4. Turn the printer back on and check whether the indicator status is back to normal. Seiko Epson, also known as Seiko Epson or Epson, is a publicly traded printer (TYO:) founded in 1942 and headquartered in Nagano Prefecture, Japan

67 referred to as 24) printers produced by the company.

Why does the Epson L360 power keep flashing may be caused by the following two reasons:

1. The printer has at least one ink cartridge running out. Epson color inkjet printers must be installed at the same time in color and black ink cartridges, and there is ink at the same time to work, so that the printing quality can be guaranteed, and on the other hand, it is also to avoid the nozzle being in a state of lack of ink for a long time and causing the nozzle to be blocked.

2. The printer is not loaded with paper or is out of paper.

Please refer to the table below for details

Summary. Hello Epson L360 power lamp and paper jam light flickering at the same time Cause analysis: 1. This problem is caused by the presence of paper jams inside the printer sense, or the machine hardware cannot operate normally.

Solution: Step 1: When the new machine is used for the first time, please pay attention to check whether the print head protective strip (blue) is removed, and remove the blue strip.

Note: The scanner parts of the L31xx series and some models cannot be lifted, and the print head does not have a blue adhesive strip and does not need to be removed.

Hello Epson L360 power lamp and paper jam light flickering at the same time Cause analysis: 1. This problem is caused by the presence of paper jams and foreign objects inside the printer, or the machine hardware cannot be rented and operated normally. Workaround:

Step 1: When using the new machine for the first time, please pay attention to check whether the protective strip (blue) of the Hongzi cheating calling head (blue) is removed, and remove the blue strip. Description:

The L31xx series and some models cannot be lifted by the scanner parts, and the print head does not have a blue strip and does not need to be removed.

Step 2: Check whether there is any jammed paper or foreign object in the blue book part of the printer, and take out the jammed paper or foreign body. Note: It is normal for the L31xx series and some models to fail to lift the scanner parts.

Step 3: Check the rear feeder for any front and Zen jams or foreign objects, remove the jammed paper or foreign objects and reinstall the rear feeder. Note: Some models of L31xx series and Huichen do not have a rear feeder, so there is no need to check.

Step 4: After the above checks, restart the printer. Description:

After the above method operation, the fault still can not be eliminated, indicating that the printer has a serious failure, it is recommended to contact the Aihu Lao Pusheng certification service agency for detailed testing, please click (here Huai star) to inquire about the nearest service center to you, contact the service center to solve.

Summary. Epson L360 power light and jam light flashing at the same time, hello! It could be due to two reasons:

1. If the cartridge lights up red, it means that the fault is related to the cartridge. It may be that the machine does not recognize the ink cartridge, or the ink in the ink cartridge is exhausted and the ink cartridge needs to be replaced. 2. The red light of the paper is lit, which means that there is a paper jam, and it is necessary to exit the jammed paper in time.

Epson printer cartridge can't print out after the machine is off the solution: 1: There are air bubbles in the cartridge:

Clean the printhead with the printer's automatic cleaning program. If it doesn't improve after multiple washes, don't remove the cartridge, wait a few hours, and retest, maybe it can improve. 2：

Didn't tear off the label cleanly: Completely remove the label! (If the ink cartridge is removed and the label is removed after it has dropped off the machine, the printing quality cannot be guaranteed)3:

Clogged or aged printheads: Clean the printheads and replace printheads that have reached the end of their useful life. 4：

Bad control circuit: Replace the print head or motherboard, it is recommended to send it to a professional maintenance department. Hope it helps!

Epson L360 power light and jam light flashing at the same time, hello! It may be caused by the following two reasons: 1. The cartridge lights up red, which means that the fault is related to the cartridge.

It may be that the machine does not recognize the ink cartridge, or the ink in the ink cartridge is exhausted and the ink cartridge needs to be replaced. 2. The red light of the paper is lit, which means that there is a paper jam, and it is necessary to exit the jammed paper in time. Epson printer cartridge can't print out after the machine drops the solution:

1: There are air bubbles in the ink cartridge: Use the printer's automatic cleaning program to clean the print head.

If it still does not improve after multiple cleanings, do not remove the ink cartridge and wait for a few hours before retesting, which may be improved. 2: Didn't tear off the label and clean the skin:

Remove the label completely! (If the ink cartridge is removed and the label is removed after the machine is dropped, the width will not be destroyed, and the printing quality cannot be guaranteed) 3: The print head is blocked or aged

Clean the printhead and replace the printhead that has reached the end of its useful life. 4: The control circuit is bad:

To replace the printhead or motherboard, it is recommended to send it to a professional maintenance department. Hope it helps!

L360 How to Factory Reset.

l360 How to Factory Reset Pro, Hello! 1. Click to open 360 Security Guard, enter the software settings interface, and click the function icon at the top of the window. 2. Click the system tools icon on the left side of the window, and then click the system backup and restore icon on the right side.

3. Go to the system backup interface and click the blue Prepare Backup button below. (Before restoring the system, you need to back up the computer system first) 4. Directly follow the system prompts to back up until it is completed. 5、System Restore is also in this interface,Click the System Restore option at the top of the window,Then click the blue Prepare to Restore button below。

Hope it helps!

If the power light is off and the ink and paper light are flashing alternately, it means that the device responsible for collecting waste ink inside the printer is full, and it needs to be adjusted and maintained by an Epson authorized service center. Because of the need for professional maintenance technology and professional software, users cannot complete the maintenance operation by themselves.

2.Turn off the power of the printer》http, please leave the printer at normal temperature for 1 hour before use. If the above solution still does not solve your problem, the ink lamp and the paper lamp flash at the same time.

com.If it's a new purchase. Turn on the printer again, the working temperature of the printer is between 10-35 degrees, and check whether the indicator status is back to normal. Sela.

1. Common faults of printers.

1. When printing, the ink is scarce and the handwriting is unlegible. This failure is mostly due to the printer not being used for a long time or other reasons caused by the ink delivery system obstruction or printhead blockage.

2. After replacing the ink cartridge, the printer is on the panel when it is turned on"Ink is exhausted"The handling of the light on.

3. The treatment of the soft plug of the nozzle, the soft plug plugging refers to the failure caused by the viscosity of the ink on the nozzle due to various reasons.

4. There are many faults in the printer cleaning the pump nozzle, and it is also one of the main factors causing the plug.

5. The detection of the ink line is normal and the printing accuracy is obviously worse, which is because the inkjet printer will gradually deteriorate due to the number of uses and the printing accuracy in use.

2. Printer fault diagnosis and maintenance.

1. The printer has a printing action, but it cannot print characters.

Diagnosis and treatment: This is because there is a problem with the printer printhead, it may be that the printhead is not installed properly, it is recommended to remove the printhead first, and then reinstall it.

2. The printer has a printing action, but the shortcomings of printing characters are less stroked.

Diagnosis and treatment: Open the top cover in the shutdown state, and then remove the sprinkler. Use absorbent cotton dipped in alcohol to gently scrub the contact surface between the nozzle and the base, and install the nozzle after the alcohol has evaporated.

3. Feed multiple sheets of printing paper at a time.

Diagnosis and treatment: The printing paper does not meet the requirements, the paper is glued together, and the paper that is stuck together is separated and reloaded. Remove some of the paper from the feed tray.

4. The printer cannot pick up the paper and jammed paper in the tray of the paper feeder.

Diagnosis and treatment: The paper in the tray is not attached to the paper feeder, and the paper should be pushed inward. The paper is wrinkled, curled, or the paper edge is not neat, so that the paper is caught in the printer and the paper is jammed.

Why does the Epson L360 power keep flashing may be caused by the following two reasons:

1. The printer has at least one ink cartridge running out. EP Blade Inkjet Color Inkjet Printer must be installed at the same time with color and black ink cartridges to work, and at the same time there is ink to work, so as to ensure the printing quality on the one hand, and on the other hand, to avoid the nozzle in a long-term state of ink shortage caused by the blockage of the silver bucket nozzle.

2. The printer is not loaded with paper or is out of paper.

Please refer to the table below for details