How to solve the problem of burning engine oil in Audi A6L in 13 years? Is it really going to be ove

The engine oil itself has a certain amount of consumption, and excessive consumption is the problem of burning engine oil. Burning engine oil is caused by the following factors, as long as the following problems are solved, burning engine oil can be solved.

There are many factors that affect the burning of engine oil, such as: fuel quality, driving conditions, driving habits, maintenance habits, etc., the above reasons will aggravate the oil consumption and lead to the burning of engine oil, making the vehicle appear:

1. Carbon deposition occurs in the combustion chamber, which makes the gas ring of the piston ring stuck, and the sealing is poor.

2. Oil sludge is generated in the lubrication system, and the oil sludge blocks the oil return hole of the oil ring and weakens the oil scraping performance.

3. Wear occurs between the piston and the cylinder wall.

4. The valve seal is corroded and aging, and the sealing performance fails.

In addition, cars now have crankcase ventilation systems (exhaust valves), which can also exacerbate oil consumption if there is a problem. In the past, the problem of burning engine oil could only be solved by dismantling and repairing, but now there is a plan to solve the problem of burning engine oil without dismantling and repairing.

As long as it is not well maintained, any car will burn engine oil.

Causes of burning engine oilIt is mainly related to the following three accessories:

Exhaust valve. Valve oil seals.

It is the piston ring jamming.

How to fix itThere are two solutions on the market today, one is to overhaul and the other is to release the piston ring. The cost of the overhaul is high, and the oil will still burn after the repair is completed. The more efficient and simple way is to release the piston ring with PNF repair agent, as long as the accessories are okay, there is no serious cylinder can be repaired with PNF repair agent to release the piston ring, many riders have repaired, you can refer to it.

Hello, it's normal for Audi to burn engine oil, German cars are like this,

If the oil burns badly, it needs to be overhauled.

Well, it must be overhauled.

How to burn. Usually a major overhaul.

No, you don't. Replace worn pistons, piston rings, cylinder liners and other components. Another major reason why oil enters the combustion chamber is that the valve oil seal deteriorates and loses its tightness.

This causes the oil, which lubricates the valve, to enter the combustion chamber as the valves open. To solve this fault, the valve seal needs to be replaced.

Causes of burning engine oil

1. It should be noted that the gap between the piston and the cylinder wall is too large, resulting in the splashed oil running to the combustion chamber as the piston moves up and down.

2. The viscosity of the oil is too low, the lubrication effect is not good, and the wear of the piston ring is aggravated, resulting in upward channeling and volatilization.

3. The piston ring is worn, or the counterpart position is reversed during packaging.

4. The vent of the crankcase is blocked, resulting in excessive oil pressure, increased backflow resistance, and carbon deposition caused by staying on the inner wall of the cylinder for a long time.

Yes, burning oil is a problem with the engine, but never overhaul it. After repairing, it is not as good as the original. If you can tolerate it, if you don't have enough oil, add it to it.

Hope, thank you.

Audi is a lot of burning engine oil, this is a common problem of the engine, can not be prevented, but use some good oil driving experience is better, now the use of imported magic red oil, the use of four types of PAO, the quality is much better than the general three types of fully synthetic engine oil, even if there is a burning of engine oil, it will not produce carbon deposits, will not affect the power of the engine, as long as you pay attention to the oil level is not low, there is no problem with normal driving.

The EA888 engine with Audi A6L is relatively easy to burn oil, which is a design loophole in the designer, and this engine has this problem in German cars, you are not alone.

First of all, you have to confirm the reason for burning engine oil, the main reason for burning engine oil is two aspects, one is the problem of accessories, waste gas valve, valve oil seal, cylinder pulling, cylinder pressure is insufficient. The second is that the oil circuit is not cleaned for a long time, the antifreeze is not replaced in time, the oil service life is too long, and the piston ring is stuck, and the more common situation is that the piston ring is stuck.

From the market experience, German car parts are not easy to have problems, most of the EA888 engine oil burning is caused by piston ring stagnation, stagnation is from the oil circuit, the oil temperature is 110 degrees, and the oil circuit is not clean for a long time caused by high temperature, so that the oil is exhausted in advance, the small hole of the oil ring is very small, the oil inside will be dried and scabbed for a long time, and a cylinder stuck is 5000 kilometers of a liter of oil, At this time, the working conditions of other cylinders will also start to be bad, and soon the 4 cylinders will be stuck, and it will become a liter of engine oil for 1000 kilometers or even hundreds of kilometers. Therefore, in order to solve the problem, we must start from the root oil circuit, which is the way to remove the root.

If your car is a serious cylinder after checking the accessories, then it needs to be overhauled, if the parts are fine, there is no need to overhaul, PNF repair agent can be repaired. Some riders have shared the success of the treatment of the restorative before, you can refer to it.

Audi Q5 burns engine oil repair process in detail.

In order to protect the engine and prolong the life of the engine, German cars are designed to reduce the frictional resistance between the piston ring and the cylinder wall, and an oil film will be formed in the cylinder wall, and part of the oil film will be burned off with the gas burned at high temperature, so the oil loss is more than the same period last year.

1. The processing technology of the engine cylinder of Audi car, the engine cylinder wall is shown as a mesh under the microscope, and each small mesh is a "small oil depot" for storing oil, and the piston has better lubrication performance than the flat cylinder wall when running up and down in the cylinder, which also minimizes the wear between the piston ring and the cylinder wall.

2. The toughness of the piston ring of the Audi car is better, and the degree of tension is weaker than that of the Japanese car, simply put, it is strong, but the elasticity is small, and this matching naturally reduces the wear and tear caused by the piston ring running up and down on the cylinder wall, so the Volkswagen car has traveled hundreds of thousands of kilometers to measure the wear of the cylinder wall of the engine, which is much smaller than that of other car series, and the engine can still maintain good working condition.

3. The engine is like the heart of the car, the engine burns oil in the final analysis, or the piston ring has a problem, under normal circumstances, there is no oil loss of 1000km, if it exceeds too much, it is possible to burn oil. If there is a problem with the sealing of the piston ring, the oil will follow the movement of the piston and secretly drill into the combustion chamber to participate in the combustion, and then the oil will be burned.

4. In order to prolong the service life of the engine, Audi car manufacturers burn engine oil.

Precautionary measures for burning engine oil:

1. Use high-quality engine oil

Engine oil is very easy to corrode and age in a long-term high temperature state, resulting in the oil film becoming thinner, and it is easier to escape to the combustion chamber to participate in combustion, so the use of high-quality engine oil can greatly delay this phenomenon.

2. Pay attention to the cleanliness of the fuel circuit

Carbon deposition is indispensable in the combustion process, and carbon deposition is the root cause of some automobile failures, such as the aging of valve seals, piston wall clearance, etc., which are directly or indirectly related to the formation of carbon deposition, so keeping the fuel oil circuit clean is of great help to prevent burning engine oil, of course, this needs to be done with the help of high-quality fuel additives.

3. With the help of external forces

Considering the relationship between domestic oil products, it is necessary to use high-quality engine oil and (PNF) fuel additives to achieve, which is also the key to solving the problem of burning engine oil without dismantling and repair.

Hello car owner, this is not necessarily, first of all, we must understand which parts cause the burning of engine oil. If it is caused by damage to the supercharger or damage to the exhaust valve, only the relevant parts need to be replaced, if it is caused by the piston ring, the cylinder barrel is worn, and the oil consumption is more than 2 liters for 5000 kilometers, this situation is recommended to do overhaul. It is recommended to go to the shop first to let the repair and try to check the cause of the burning oil, and then decide whether to overhaul it.

Is the Audi A6 burning oil a problem with the engine? Can you check if there is any oil at the inlet and outlet of your supercharger? If the engine oil in these places is not very serious, it is the engine inside the engine to burn the oil, now this car maintenance street has a project to clean the engine without dismantling, the project to clean up the carbon deposits inside the engine without dismantling, it should be enough for a few hundred dollars, you can try it first, see if you can solve it?

If you can't fix it, you can go and overhaul the engine! After all, a major repair will cost tens of thousands of yuan.

Under normal circumstances, it is a problem of the engine that burns the engine oil, and the problem is not small, in this case the engine must be overhauled. Otherwise, it will only get worse.

It is a relatively normal phenomenon for Audi's model to burn engine oil, this is not a problem with the engine, it is the same, and this does not need to be overhauled at all.

Burning engine oil is definitely a problem with the engine, and this situation generally needs to be overhauled, and the engine is disassembled and replaced with 4 matching.

Check that if it is not for gasket leakage and valve oil seal damage, the engine will have to be dismantled and overhauled if the engine burns oil severely. ，

Audi A6L burning engine oil is a normal phenomenon, if you need to repair it, you still need to confirm how much the engine burns oil, if the burning is not serious, you still do not contact the maintenance.

I think Audi burns engine oil to burn engine oil, no need to overhaul the engine, I think it should be a general problem, it seems that he has to burn a little engine oil for a long time, my friend's time is quite long, and it is also super.

The burning of engine oil in the car is not necessarily a problem with the engine, but also may be caused by the failure of other parts, so it is best to find a professional person to inspect and repair at this time, and replace the relevant parts in time, so as to achieve a safer driving effect.

For vehicles to burn oil, it is generally a problem with the engine. It is best to go to the four-s store for an inspection. If the burning of engine oil is particularly severe, it needs to be overhauled.

The Audi A six L upstream engine may be a problem with the engine, and if the engine problem should need to be overhauled, otherwise there may be no way to use it anymore.

Audi burning engine oil is a common problem and there is no solution.

As long as the burning is not serious, there is no need to repair it, and a liter of thousands of kilometers is fine.

If the oil burns severely, it must be overhauled.

Under normal circumstances, the burning of engine oil in the car is a problem of the engine, and it is safe to overhaul it in time!

This is not easy to say, because I don't know what the reason is to burn the engine oil, you had better go to the Audi 4S store to ask about the after-sales service, let the master check it for you, if not, you have to repair.

This car burning engine oil should be a common problem, so far there is no good way, many people have responded to this problem, so now it is also a technical defect, no customer to solve.

Is the Audi A6L burning engine oil a problem with the engine? Need a major overhaul or not? It's also possible that you're going to take a look at the after-sales service anyway.

Is the Audi A6 oil burner a problem with the engine? Need a major overhaul or not? If you think this is the case, you should go to the 4S store.

Is Volkswagen's engine still called Volkswagen if it doesn't burn oil???

Process: 1. Heat up the car for 10 minutes (the hotter the oil, the better), park the car in a flat place and pull up the hand brake.

2. The jack frame rolls aside to stare at the front side of the car, put in the bracket, and then erect the other side and put the bracket, and at the same time put the jack insurance, and put the rear wheel on the obstacle to avoid moving outside, safety is still the most important.

3. Drill into the bottom of the car and remove the engine guard.

4. Find the position of the filter and the oil drain screw, the machine filter is a white cylinder, the oil drain screw is at the bottom end of the oil pan, be careful not to make a mistake with the transmission oil shell, the oil pan is generally located in the front of the car, second only to the radiator.

5. Drill under the car again, use a hexagonal wrench to get the oil drain screw, and then slowly turn it away with your hands, pay attention not to be burned by the oil, and use the basin as soon as the oil comes out.

6. Open the hood, open the oil cap, and the air circulation is smooth. Use a wrench to start the unloading filter.

7. Wait for 20 minutes and wait for the oil to basically not drip, wipe the area around the mouth, install the new machine filter, remember to wet the oil filter rubber ring with engine oil before installation, and tighten the machine filter by hand without a wrench.

8. Install and return the oil screws to prepare Kai, and you can also change them to new ones if you want to. Use the funnel to refuel the engine, stop when it reaches 4 liters, see if the dipstick reaches the lowest, and then you can start the engine to check the leakage, you need to step up.

9. Replace the guard plate, put down the transport and car, and continue to add oil to the middle of the oil ruler, not too much, not too little. Pay attention to the engine oil, do not dump indiscriminately, and protect the environment.

Burning engine oil is an unavoidable problem for all car models. It can also be said that as long as it is a fuel vehicle, there will be a phenomenon of burning engine oil, but some of the performance is not obvious. It's not that you think you don't burn it really if you don't burn, oil consumption is real.

When the engine piston runs up and down, the cylinder wall will have a lubrication and protective oil film, which will be burned off. Generally, as long as it does not exceed a reasonable range, it is normal, if the piston ring is trapped by carbon deposits and loses its elasticity, and can not scrape the oil well, the oil entering the combustion chamber will increase, which is the burning of engine oil. Of course, sometimes burning engine oil is not necessarily the cause of the piston ring, but also a certain part of the damage and aging, which needs to be checked and confirmed by the repair shop.

The reason for the four failures of burning engine oil.

One. If you don't clean the oil circuit for a long time or don't do effective oil circuit cleaning, detergents are used at will, and using detergents and effective detergents are two different things;

Two. The antifreeze replacement cycle is too long or not changed at all;

Three. The oil change interval is too long;

Four. Long-term or often short-distance driving.

The above four points of the vehicle that burns engine oil must be occupied by one or all four points.

The solution to burning the oil.

In the habitual thinking of car enthusiasts, they always think that burning engine oil should be overhauled, so that they not only have to bear high maintenance costs, but also bear the unpredictable risks and depreciation losses caused by the overhaul of the vehicle. Destroy the airtightness and precision of the engine. And there is a possibility that the engine oil will burn again after tens of thousands of kilometers, so overhauling the engine is not sustainable.

Find out the quick solution to Audi burning engine oil.