What to do if the floor tiles are scratched and worn without matte

1. Repair of scratches on floor tiles:

Use the floor tile repair agent to repair the tile scratches, use a brush dipped in the repair agent to draw in the scratch gaps, paint again after 30 minutes, and repeat again after drying, until the scratches are reflective from the side, so that the floor tile scratches can be kept clean for a long time after treatment; In addition, scratches that deeply scratch the brick surface can also be polished with a water mill, but be careful to grind and polish, otherwise there will be pits or greater damage to the brick surface, such as matte, wider scratches.

Second, the treatment of metal scratches on floor tiles:

What should I do if I push and pull the iron frame or aluminum alloy on the floor tiles during decoration, and the floor tiles have scratches? The focus point of metal push and pull is small, the pressure is large, and the traces of metal can penetrate into the inside of the brick surface, which is more difficult to clean, and the surface is easy to damage with acid, if it is a scratch caused by heavy metal push and pull, it will be more difficult to remove the scratches on the floor tiles, in order to remove the metal scratches on the floor more labor-saving and faster, you can soak it with detergent for 3 minutes and then scrub it, the floor tile cleaner will become loose after the reaction and decomposition of the metal scratches, wipe it with a wet towel dipped in the detergent a little harder, and the clean brick surface will be displayed immediately, It will not affect the surface of the floor tiles, and there will be no change in gloss.

1. Use floor tile repair agent to repair tile scratches, use a brush dipped in the repair agent to draw at the scratch gap, paint again after 30 minutes, and repeat again after drying, until there is a reflection at the scratch from the side, so that the floor tile scratches can be kept clean for a long time after treatment; In addition, scratches that deeply scratch the brick surface can also be polished with a water mill, but be careful to grind and polish, otherwise there will be pits or greater damage to the brick surface, such as matte, wider scratches.

2. Use a polishing machine to add wax, and the effect is good.

3. If the damage is not very serious, as long as you squeeze some toothpaste on the floor tile and wipe it counterclockwise with a damp rag.

4. If it is troublesome, the best effect is to find a professional floor tile cleaning company to deal with it.

To restore the shine of sandpaper-sanded floor tiles, you need to prepare: fabric softener, mop, rice washing water, table salt, water basin.

1. First of all, pour an appropriate amount of rice washing water into a basin.

2. Add the fabric softener to the rice washing water.

3. Add the salt to the rice washing water.

4. Next, take out the mop shabu bucket and pour the rice washing water in the basin into the mop shabu bucket.

5. Then wash the mop.

6. Then wipe the floor tiles sandpaper-polished.

7. Finally, the floor tiles will return to their luster.

If it is a glazed brick, it will not be able to return to the sky, and the homogeneous polished tile can still be saved: use polishing equipment to do polishing treatment to achieve or approach the gloss of the original brick.

Floor tile glossy repair prescription bai method du:

1. Polymer stiff materials can be used to coat many times to form a crystal hard return film, and repair the rough pit surface into a flat answer, the standard of repair is to see the bright light from the side, and after repairing it into a bright plane, in order to increase the brightness and waterproof and antifouling performance, use the antifouling king to smear and polish.

2. You can use strong acid corrosion surface repair, the effect of repair is consistent from the front color, can not be seen, from the side, the repaired place and other brick brightness is different, the main effect is that the repaired place is kept clean for a long time will not be dirty, whether with shoes or with a wet mop mop, it will not become black, waterproof and anti-fouling, long-term effective.

Floor tile is a commonly used material in our home decoration, and its wear resistance, aesthetics, and easy cleaning are its advantages. However, over time, the floor tile will also lose its original luster due to wear, dirt, etc. So, what should I do if the floor tiles are worn out?

This article will introduce several solutions for you.

1.Cleaning. The cause of tarnishing on the surface of floor tiles can be due to incomplete daily cleaning, resulting in the accumulation of dirt on the joints and bricks.

Therefore, the first thing to try is to clean the floor tiles with locust ridges. You can use some household cleaners, such as floor cleaners, stain removers, etc., and clean them according to the instructions. You can also use some homemade detergents, such as white vinegar, baking soda, etc., which are environmentally friendly and pollution-free, and are very safe for home use.

2.Waxing. If the luster of the floor tiles is not restored after cleaning, waxing can be considered.

The purpose of waxing is to protect the surface of the floor tiles and enhance their shine. Clean the floor tiles with detergent and then wax them with wax water. The waxing should be evenly applied, and the floor should be polished with a polishing machine after the wax water is dry, which can better improve the gloss and protective performance of the floor tiles.

3.Grind. If none of the above methods work, then you can consider grinding floor tiles.

The purpose of grinding is to remove stains and wear marks on the surface of the floor tiles, so that the surface of the floor tiles becomes smooth and smooth again. The grinding process requires the help of professional tools and techniques, and generally requires a professional ground maintenance company or workers to operate.

4.Replacement. If the wear and tear on the surface of the floor tiles is more severe, or the floor tiles have been used for a long time, then replacing the floor tiles may be a better option.

Before choosing a new floor tile, you should consider its quality, style, style and other factors, and choose a floor tile that suits you.

Wear and tear of floor tiles is not a big problem and can be dealt with by cleaning, waxing, grinding, replacing and other methods. Hopefully, this article will be helpful to you.

Summary. Start by preparing a toothpaste.

Apply an appropriate amount of toothpaste to the ground area.

Then use your fingers to spread the toothpaste evenly.

After letting it sit for a few minutes, wipe off the surrounding toothpaste with a rag, being careful not to rub it into the area that needs to be repaired.

The glaze of the floor tiles is gone, and it is spent, what else can I do.

1.First of all, prepare a toothpaste. 2.

Apply an appropriate amount of toothpaste to the ground area. 3.Then use your fingers to spread the toothpaste evenly.

4.After a few minutes of sitting, wipe off the surrounding toothpaste with a rag, taking care not to rub it into the area that needs to be repaired.

Repeat several times.

1. If the scratch is shallow, you can apply toothpaste on it, and then wipe it with a soft rag.

2. You can also use paint of the same color with the core to paint on it, but it should be evenly coated. Bi coarse.

3. It can also be coated with wax and then wiped with a sponge, which can not only repair slight scratches, but also keep the tiles bright and clean.

4. If the scratches are deep, it is recommended to replace them with new porcelain and Huixiao bricks, so as not to affect the overall appearance.