What causes damp water pipes in the bathroom?

The dampness on the surface of the water pipe is called "return tide", which generally occurs in the south of the "return to the south of the sky", or "Huangmei day". During this period of weather, the air humidity is high, hot and humid, and the water temperature in the upper water pipe is low, which is cool water. When the moisture in the sultry air meets something cold, it condenses into water.

This is the resurgence.

The water pipe on the bathroom is damp, it may be that the water pipe is in disrepair and broken, or it may be that there is a problem with the waterproof layer of your house, the wall is leaking, you need to find the property, let the property find a maintenance team, and show you If it is a water pipe problem, the water pipe is leaking, you need to repair the water pipe, but if it is a wall leakage, it is a big project.

The water pipe on the bathroom is damp, as long as it does not drip, it is not a leak. It's just damp, that means it's condensation, the reason is that the toilet is too damp, turn on the ventilation fan, and ventilate it more.

The damp water pipe in the bathroom is caused by the high temperature in the home and the low temperature of the tap water.

If the pipe in the bathroom is wet, it may be because of a water leak, which is why it is like this.

It's very simple: because of the change in weather (cloudy.

The reason for it is humid air! In addition, the tap water pipe is cold, so it is easy to grow water droplets in the air in the enclosed space! It's normal when it's ventilated on a sunny day!

This is due to the temperature difference, which condenses the moisture in the air!

It may be a leaky place, find a professional master to check it.

What causes the bathroom water supply pipe to time out? Find a professional master to check if it is missing?

What is the cause of dampness on the bathroom wall, the phenomenon of resurgence of moisture on the bathroom wall is very common due to it'The airtightness of the space, coupled with the fact that our daily laundry and face washing are carried out in the bathroom, the following are the reasons for the dampness of the bathroom walls.

1. The waterproofing of the bathroom is not done well

Causing water in the bathroom to seep into the wall, affecting the outside through the wall. There is no better way, only to redo the waterproofing, it will be more troublesome, but if you don't do it, it will be more troublesome in the future, other walls will also be affected, and all the latex paint will be damp in the future.

The water vapor in the bathroom is too heavy, but the ventilation conditions are not good, or the wind direction is like blowing inside, causing the water vapor to flow back into the house and condense into fine particles on the wall, which is the feeling of dampness. Generally, it can be solved by installing a ventilation fan.

2. The water pipe near the bathroom is broken

Water enters the wall slowly, but the crack should be small. Test with a pressure pump, if there is a problem with the water pressure, it is troublesome, and the water pipe needs to be repaired. This is usually due to the fact that the condensation formed by the cold outside the wall and the heat inside the wall causes the wall to be damp, which usually occurs in winter.

3. Water infiltration of the partition wall

The wall and ground of the bathroom next door or the bathroom next door upstairs are not waterproof well, once there is water in the bathroom, it will slowly penetrate into you, in this case, only after finding the leakage point, re-waterproof in the bathroom, and then restore the wall and floor to clean the bathroom floor, use a brush to remove the dust of the tile surface, and make the tile surface layer without clear water.

How to deal with moisture return outside the bathroom wall

For the phenomenon of large slabs and moisture accumulation and wetting, the cause of wetting should be investigated first, and see if it is caused by cracks in the floor slab, leakage of wall roots, etc., then it should be treated according to the above methods. If other problems are caused simply by excessive humidity and capillary water seepage, the following methods can be used.

If the wall or ground is wet, you can use No. 02 plugging spirit, which is about 1:o 8 with a ratio of about 1:o 8, stir evenly, and stand for 30min before use. During treatment, the slurry is scraped or painted in two layers on the wall or floor.

3 5 times per layer, when there is a hard feeling after each layer is done. Cured with water to avoid cracks.

When there is a large area of slow water on the wall and ground, you can use No. 03 plugging spirit, which is 1:o 3 left in the ratio of water, stir evenly, and let it stand for 20min before use. When operating, first scrape and apply to stop the water, and then use No. 02 plugging spirit to scrape and paint, which can dry the wall and ground.

Wet water pipes on the toilet can be caused by one of the following reasons:

Blockage inside the pipes: If the inside of the toilet water supply pipe is blocked, the water flow is not smooth, which may cause the inside of the pipe to be damp.

Broken pipes: If the toilet water supply is old and cracked, the water will leak out, causing the inside of the pipe to be damp.

Aging water pipes: Aging plumbing pipes in the bathroom may cause pipes to crack or leak, resulting in dampness inside the pipes.

Damaged waterproofing: If the waterproofing layer in the restroom is damaged, water may seep into the inside of the pipes, causing the pipes to become wet.

Improper use: Improper use can also cause moisture inside the pipe. For example, frequent use of water heaters or showers requires a large amount of water to flow, which may cause dampness inside the pipes.

If your bathroom plumbing is wet, it is recommended to inspect the plumbing in time to find out the cause of the moisture and take appropriate measures to repair or replace it. At the same time, to keep the pipes dry, you can regularly close the valves on the pipes to avoid large amounts of water, or install an exhaust fan in the bathroom to keep the air circulating.

Many people probably have an experience, the bathroom at home is particularly damp, especially if the bathroom has no windows, the ventilation is not good, there will be a peculiar smell, not to mention, wooden furniture will be moldy, paint, deformed, and even after a long time, the tiles on the wall will also fall off, so many people will feel a headache, today I will give you tips to teach you how to deal with the dampness of the bathroom!

Clause. 1. Exhaust fan.

The exhaust fan is the basic equipment of the poor bathroom, and the exhaust fan can be turned on frequently, in addition to discharging the moisture in time, it can also discharge the filth of the bathroom, which is conducive to physical health. If you do not have an exhaust fan, you should close the door when you leave the bathroom after taking a shower and allow the moisture to condense before entering to dry or blow dry with an electric fan. If there is an overall shower room, when showering, the orange chop must close the door well.

Clause. 2. Install a shower curtain.

If the bathroom is not divided into dry and wet areas, then please try to install a shower curtain to prevent the bath water from splashing (special attention must be paid to the moisture-proof and dehumidification of the bathroom socket, once the power supply leaks due to moisture, the consequences are unimaginable).

Clause. 3. Deal with it in time after bathing.

The walls of the bathroom look dry, but in fact they hide invisible moisture. Therefore, toilets should not be built under stairs and plastic wall coverings should not be used; The tile joints that are attached to the wall and the ground should be coated with white cement, if the brick joints produce black spots, it means that the moisture is too heavy and moldy. Disinfect with disinfectant water in time, dry the walls with a hair dryer, and open the door more often at home to ensure ventilation so that the water can fully evaporate.

Also, try to dry the walls and floors as much as possible after bathing.

Addendum: In fact, to avoid dampness in the bathroom, the best thing is to keep the ventilation of the bathroom, many houses have no windows, it is best to follow the exhaust fan or special air conditioner, try to let the water seal of the bathroom evaporate, and after taking a bath, wipe the ground in time.

Dear, I am glad to answer for you: how to solve the problem of dampness in the water pipelineA: How to solve the problem of dampness in the water pipeline: The method is as follows:

To completely solve the problem of dampness of water pipes, as long as there is no water leakage in the water pipes, we can brush the anti-coating on the surface of the water pipes, which can effectively prevent the pipes from being corroded by water and rusting.

The bathroom is the most humid place in the family space, because frequent water use, coupled with the humid rain environment, is easy to breed bacteria, affecting our life and health. Bathroom water pipe: Now the general water pipe is a dark pipe, if the water pipe is broken, it can not be found in time, the water will slowly enter the wall, so that the entire wall will be soaked, affecting the entire bathroom, the problem of dampness is the most difficult to deal with, so pay more attention.

Bathroom waterproofing: If the bathroom waterproofing is not done well, it will lead to a large amount of water vapor in the air infiltrating into the wall, then it will affect the wall, and the whole space will be extraordinarily humid, so we must be careful when doing waterproofing, whether it is in the material or the construction process, it is not perfunctory. Bathroom ventilation:

There is a lot of water vapor in the bathroom, but if the ventilation conditions are not very good, then the whole water vapor can not be discharged, and then it will condense into water droplets, which is also the main culprit that causes the bathroom to be damp, so the ventilation conditions must be guaranteed, otherwise the impact on future life is great.

Water pipe repair: If there is no problem after the inspection, then it is necessary to detect whether there is a leak in the hidden pipe and water pipe, turn off all the faucets at home to see if the water meter is rotating, and if there is a proof that the water pipe is broken and needs to be repaired in time. Waterproofing Construction:

If there is a problem with the waterproofing of the bathroom, then the choice of materials must be done in the selection of materials, first of all, it must be redone waterproof, and then the materials selected in the bathroom furniture must also have waterproof performance, so as to be able to fully cope with the problem of moisture. Install exhaust fan: If there is no exhaust fan installed in the bathroom, then you can choose an exhaust fan or a special air conditioner, which can speed up the dissipation of moisture in the bathroom air and solve a large amount of water vapor in the air.

The box material is the main body of the bathroom cabinet, which is disguised by the surface material and is easy to be overlooked. Since the cabinet material cannot be seen in sight, many people think that it does not matter if you use a cheap plate. In fact, not all panels can be used as a cabinet material for bathroom cabinets, only those specially made panels that are both moisture-resistant and breathable can take on this responsibility.

Waterproof aluminum foil condensate natural enemy. According to our usual bathing experience, we will find that the hot air in the basin or faucet in the bathroom will produce a large amount of condensation, which will flow down the countertop into the bottom of the cabinet, causing the cabinet to become moldy and deformed. If you can add a layer of waterproof aluminum foil or rubber mat to the bottom of the cabinet in time, you can solve this problem by padding them at the bottom of the drawer to prevent moisture and fix the bath products at the same time.

The metal high leg design refuses to extend moisture upwards, and if the wooden legs of the bathroom cabinet are used, they are susceptible to moisture, and will unconsciously direct moisture to the cabinet, which will eventually cause the entire cabinet to deform. If metal is used as the leg material at the bottom of the cabinet to support the cabinet, the problem is cleverly solved. In addition, the "bones" of the aluminium legs are strong and fearless in the face of the "pressure" of the basin, and the rust-resistant features ensure that the legs do not rust when they come into contact with water.

A double umbrella with a waterproof bottom leakage bottom plate. Bathroom cabinets with the basin directly connected to the cabinet are common and frequently used. The outlet pipe of the basin will pass through the bottom plate and enter the ground, and the condensation in the basin will also take the opportunity to quietly soak into the cabinet floor from the cutting edge of the board, causing the bathroom cabinet floor to be damp and deformed.

As long as a waterproof bottom drain is installed at the outlet of the pipe at the bottom of the pool, the service life of the cabinet can be extended.