Do I need to tear off the original film to paste the tempered film?

Tear it off.

1. It is recommended to tear off, the film that comes with the mobile phone is a plastic film, and the original film is only to prevent the screen from scratching, not to prevent falling;

2. If you paste the tempered film, you have to tear off the original film, if you don't tear it off, it will cause the mobile phone to touch insensitively and the display effect is not good.

If you don't tear it off, the new tempered film may not be able to completely cover the original screen, which will affect the appearance and screen clarity.

Toughened glass. It belongs to safety glass.

Glass has quite good abrasion resistance properties and is very hard, with its Vickers hardness.

Reached 622 to 701. Tempered glass is actually a kind of prestress.

Glass, in order to improve the strength of glass, usually use chemical or physical methods to form compressive stress on the surface of the glass, and the glass first counteracts the surface stress when it bears external force, so as to improve the bearing capacity and enhance the wind pressure resistance, cold and heat resistance, impact and so on. The tempered glass protective film is a higher level of protection for the mobile phone screen. The most widely used glass protective film in the world is in Europe, for this reason, the main product of tempered glass protective film is the European market, tempered glass protective film will also be rapidly popularized in China, and will form a huge industrial chain market.

Although tempered glass protective film is a new type of mobile phone protective film, there are many manufacturers of tempered glass protective film, according to incomplete statistics, there are nearly 100 in China, mainly concentrated in Guangdong, and it is increasing day by day.

Yes, the toughened film is to install a new film on the mobile phone.

If you are using a vivo mobile phone, it is recommended to remove the original film of the mobile phone and then paste other films.

Can be torn off. The film that the new machine comes with when it leaves the factory is not a film in the real sense, just a PE film, the main purpose is to ensure that the screen is not easy to scratch in the process of the mobile phone from the factory to the packaging. In addition, after time of storage, this thin meter will lose its adhesion and is easy to tear off on the screen.

The original mode has a layer of protective film, when pasting the new mobile phone tempered film, the original protective film must be removed, and the new film can be re-pasted in the future, so that the tempered film can better protect the mobile phone, and the contact surface with the mobile phone will be more consistent, and the use effect is better.

If you replace the tempered film for the mobile phone, of course, you have to tear off the old film before, otherwise you will repeat the film, and it will also affect the beauty of the mobile phone.

You don't tear off the original protective film of the mobile phone, if you put the film on it, it doesn't make sense, the original film also has the function of protecting the screen, if you want to change the film, it must be to tear off the original protective film and then replace it.

It will be better to tear it off, and if you don't tear it, the tempered film will thicken the screen, and the sensitivity of the touch screen is not so good.

The old one must be torn off, otherwise it will be useless to stick the new one.

Peel off the original film, wipe the screen clean with a film applicator, and apply the film.

Summary. Hello And because the adhesion force of the tempered film is the same as that of the ordinary film, the mobile phone with the film is easy to fall off after directly pasting the tempered film. Tear off the original film first, clean and dry it and paste the tempered film more firmly.

Can the original film be pasted with a tempered film if it is not torn?

Hello I'm glad to answer for you, it's not recommended, you need to remove the ordinary film that was pasted before, if you don't tear it off, the new tempered film may not be able to completely cover the original screen surface, which will affect the beauty and screen clarity. Tempered glass belongs to safety glass. Glass has fairly good abrasion resistance and is very hard.

Hello And because the adhesion force of the tempered film is the same as that of the ordinary film, the mobile phone with the film is easy to fall off after directly pasting the tempered film. Tear off the original film first, clean and dry it and paste the tempered film more firmly.

No. Tempered film is made of thin glass compression made of mobile phone film, because of the material, the tempered film is very thick, so the tempered film can not be directly pasted on the original film, to be directly pasted on the original film, will make the mobile phone screen film too thick, will affect the operation of the mobile phone screen, but also make the mobile phone display bad.

Precautions for mobile phone tempered tempered film:

First of all, polish the screen of the mobile phone first, and do not leave a little foreign object on the mobile phone screen to prevent bubbles during the film.

To apply film to the mobile phone, it is necessary to choose a good environment, and there should be no dust around, so as not to cause secondary pollution on the mobile phone screen, and there is no dust in the place where it is generally not too dry.

The front and back of the mobile phone screen are to be clarified, and then it is necessary to align with the screen of the mobile phone, and then lift the top of the film at an angle of about 60 °, and the screen should be aligned up and down.

If there are bubbles in the process of sticking the screensaver, don't panic at this time, slowly squeeze out the bubbles with a card or finger, if it still doesn't work, tear off a small side of the film and re-stick it.

After the mobile phone screensaver is pasted, tear off the outermost protective film, use a clean mobile phone cleaning cloth, and wipe the mobile phone screen as a whole.

If you are sticking the tempered film, you must not bend the film excessively, because it is easy to break the tempered film, and you should slowly tear off the protective film of the inner layer of the tempered film around the perimeter of the mobile phone screen.

Remember to align from top to bottom, close to the phone screen, press a little around the screen to prevent bubbles, and peel off the outer layer of protective film. <>