The wall tiles are uneven, do you have trouble again?

Once the tiles have been laid, find out the unevenness and repair it: if the solidified cement is not dry, the decorator only needs to gently tap the floor tiles with a wall knife until this brick is at the same level as the others. The solidified cement has dried.

If a few bricks are uneven, you should use decoration tools to take out the uneven floor tiles and replace them with new bricks. After completion, the batch of putty is brushed flat and the cement is cured. If the tiles are uneven, it is recommended to rework them all.

The reason for the unevenness of the floor tiles, in the process of paving the tiles, if the construction workers do not operate in the direction of the arrow on the back of the tile, the wrong operation will lead to the overall unevenness of the tile after the paving is completed. When laying tiles, it is necessary to remind the construction crew from the very beginning whether to follow the direction of the arrow. Some owners will ask the construction workers to lay the tiles seamlessly.

Although the tiles laid are beautiful, we should pay attention to the quality while pursuing beauty. The tiles laid in this way are easy to be uneven in the later stage.

Regardless of whether you know how to lay tiles or not, it is taboo to remember that tiles are not left joints. After pasting, it was found that the tiles were uneven, which was caused by the carelessness of the decoration master. If the solidified cement is not dry, the treatment of this situation is relatively simple.

Simply tap the tile with a knife to guide it flush with the other tiles. If the solidified cement has dried out, the situation is comparable to repairing. Use a tool to remove the uneven floor tiles and kick them with your heart.

Then it is cured with a putty brush with an equal amount of cement. 1 mm is still acceptable.

If one brick is re-laid, it will be more difficult to operate and may affect the flatness and integrity of other bricks. It's also unlikely to be loose, but I'm afraid of breaking it. After pasting, it was found that the tiles were uneven, which was caused by the carelessness of the decoration master.

If the solidified cement is not dry, the treatment of this situation is relatively simple. Simply tap the tile with a knife to guide it flush with the other tiles. If the solidified cement has dried out, the situation is comparable to repairing.

If you like it, you can like and follow! After we test the method with a high pass rate, I hope mine can help you, and I also hope you can help me**, like, support me more, and follow me more. If you have any questions and requests, you can leave a message in the comment area, and I will reply one by one.

It's a hassle to redo it. The production process is very cumbersome, and the materials used are very large.

It's not very troublesome, just remove it and install it again, which is very convenient and can also make the wall very tidy.

The wall tiles are uneven, and it is very troublesome to rebuild, and all the wall tiles need to be picked up and cannot be destroyed.

The key causes of unevenness after tile paving are as follows:

1. In the whole process of solidification, the dry ash layer of the dry ash layer under the tile is not compacted, and the dry ash layer on the opposite side of the brick digests and absorbs the moisture in the mixed mortar on the reverse side of the brick, and the dry ash layer that does not hammer the compactness produces foundation settlement, which in turn causes the uneven height of the brick surface.

2. The mixed mortar wiped on the reverse side of the tile is not round and symmetrical, and then produces the porcelain brick paving wall hollow drum, which in the whole process of solidification, the interaction force of the wall hollow drum on the brick and the interaction force of the non-part on the brick are inconsistent, which leads to the unevenness of the tile;

3. Carry out caulking before the tile is solidified, because the tile is not completely solidified, and the filling is a raw material for filling the joint by extrusion into the brick joint, which then produces uneven tiles;

4. Before the tile is solidified, walking and trampling on the brick surface or other engineering construction work, the tile is not solidified, walking and trampling on the brick surface, etc., it is very likely to cause loosening and unevenness.

Extended Materials: Frequently Asked Questions about the Paving of Wall Tiles.

1. Ceramic tiles need to be sampled before paving, to see whether the level, color bias and the sample are consistent, if it is determined to be accurate, it is best to let the person responsible for the construction of the project check, otherwise immediately notify the ceramic tile businessman.

2. If the wall is putty powder wall or plastered red brick wall, be sure to remove it first and do roughening to solve it. Wall tiles should not have less than 1 3 bricks.

3. The pavement should be sufficiently wet, and the walls should be straightened and the construction of the line on the ground should be prearranged to ensure that the low bricks of each house are on the same level surface.

4. It is best to use the "dry paving" method for floor tiles.

5. The floor tiles of the bathroom should be embedded with an inclination of 1 up and down, and be less than 10mm up and down the outer floor tiles. The inclination of the kitchen floor tiles is as small as possible.

6. When the yin and yang angle is solved, the 45-degree cut angle should be used, and the lower edge of the body curve should be the upper edge of the dialog box.

7. After the wall tiles are paved, the construction of the perforation project will be carried out 3 or 5 days, and the construction of the project will be carried out the next day after the "dry paving" of the floor tiles.

Generally, because the cement on the wall is not scraped flat, or it is not fully dried when dry, there is still air and water in the cement, so it is still uneven after pasting the wall tiles.

Generally, it is not dealt with well during construction, and secondly, it is also because the cement on the wall is not smeared flat in the later stage, so this situation will occur.

It may be because the tile itself has a relatively big problem, or it may be because the construction personnel have technical problems.

Nowadays, when many families are decorating their houses, the use of tiles against the walls or floors is very effective. And you can choose the right tile in combination with the decoration style of the home, there are more ceramic tile styles sold on the market, and there are more opportunities to choose. But when pasting tiles, you should also pay attention to the way of pasting.

Otherwise, there is a high probability that the tiles will not be uniform. Below, I will start with an introduction to how to deal with uneven tiles. Hope that helps.

Tiles are uneven, how to deal with them.

If the tiles in a small area are uneven, the uneven places can be repaired. It is possible to replace uneven tiles with new ones. When actually working, you can find professional decoration workers to help with the tiles, and the effect will be better.

If the tiles in the home are uneven over a large area, there is no need for local repair. Knock all the tiles and then reopen the new tiles, so that it will not affect the overall effect, and it will not be easy to step on it in the process of walking in the future, which will affect the walking.

Things to pay attention to when applying tiles, the quality and quantity of tiles must be checked when entering the tile. If there is a problem with the quality of the tile, cracks will inevitably appear after the tile is laid. It will also be troublesome to lay it at that time, so it is better to choose a big brand when buying tiles.

In addition, before tiling the tiles, it is better to arrange the tiles well and arrange them in various corners in advance to avoid incomplete tiling. This will not affect the overall appearance, and the tiles are not prone to unevenness.

The tiles are beautifully sewn, if it is found that the tile gaps in our walls are not very consistent. This is a measure that can be treated with an eyebrow pencil. At this time, the beautiful seam is wider than the tile gap, and in order to ensure that the beautiful seam of the tile is even, we will cover the original tile gap after we have made the whole perfect seam.

From the appearance, the effect is very neat, and the problem of uneven tile gaps is solved. Seam after seam. After sewing, the eyebrow peak refers to the gap between the tiles sewn with a special sewing machine.

Generally, there are many places where this tool is used, that is, to polish the gaps of the tiles. The only thing to be aware of is that it does not lead to the collapse of the tiles. Finally, you can't sew the gap beautifully.

It is very troublesome, because if you want to be tidy, you have to remove the tiles of the entire wall and then level it.

The wall tiles are uneven, and it is very troublesome to rebuild, so you have to remove all the wall tiles without any damage.

It's very troublesome, you have to remove all the wall tiles, and then take out the bricks again, and remove some of the cement on them, which is very troublesome.

Find a professional brush to transport the wall personnel, paint the wall, level the wall with putty, paint the same latex paint as the wall, for the uneven wall, the difference between the polar lead can be sanded with sandpaper, the range of sandpaper can be polished is about millimeters, when the uneven surface exceeds millimeters, it needs to be filled with putty.

1. The wall is uneven during the decoration, and there will be a large gap after the furniture and appliances are placed.

2. When the wall is uneven, it is necessary to check the uneven area, the error can be leveled by putty within one centimeter, and the latex paint is brushed again after leveling, if the error is about two centimeters, it is necessary to remove all the wall skin, and then use gypsum and cement for leveling, and finally paint putty and latex paint.

3. The uneven wall is caused by the unprofessionalism of the painters, or the construction of the construction workers is unqualified, which can be solved in a timely manner according to different situations.

4. There are also certain standard acceptance specifications for wall acceptance, which requires a vertical of three millimeters and a flatness of four millimeters. If there is a large deviation, it is the quality problem of the builder, communicate with the developer, and the developer will deal with the uneven wall problem.

Hello dear! Glad for your question! Can the tiles on the repaired wall be as flat as the original1, the tiles are cracked, they can be repaired and restored, and the effect of the tiles after repair is the same as before the breakage.

Repairing cracked tiles can be done in just a few simple steps. Here's how; The base layer is filled, the repair paste is primed, the top is scraped and the color of the top coat is adjusted, the color is applied and the top glaze is sprayed.

1. Fill the base layer, and scrape the bottom of the repair paste; 1. Clean up the residue and dust; First of all, the first step is to use an electric joint cleaning rod to polish and smooth the tile residue at the cracked place, and then clean up the residue and debris to ensure that the tile cracked place is clean and dust-free. 2. Prepare repair paste; After cleaning the cracks in the tiles, the second step is to prepare the color of the patching paste, which is best similar to the color of the tile, or a little lighter. Remember, the color of the repair paste is darker than the color of the tile, otherwise, the color of the top coat behind will not cover the color of the repair paste, and the color difference will be too large.

3. Scrape flat and polish; After the patch is ready, use a utility blade to scrape the patch to the crack of the tile, and be sure to scrape the patch smooth. After the repair paste is cured, use 180 sandpaper for the first time, then 400 sandpaper for smoothing, and finally 600 sandpaper for smoothing. 2. Prepare the color of the topcoat, color and spray the glaze; 1. Adjust the color of the topcoat; After the base layer of the repair paste is polished flat and smooth, you can adjust the color of the topcoat, according to the color of the tile, adjust the color of the topcoat, between the two, it is best not to have a color difference, otherwise it will affect the repair effect.

The color of the topcoat is too thick to spread completely, you can squeeze a drop of medical alcohol to dilute the color of the topcoat and make the color of the topcoat naturally and fully disperse. 2. Coloring and spraying glaze; After the color of the topcoat is adjusted, you can color, when the paint color, it is recommended to use a sponge to dip the topcoat color, and then the topcoat color is stained on the surface of the base layer of the repair cream, and the coloring can be completed. Paint the color with a sponge, so that the color of the topcoat can be fully dispersed, and more importantly, the sponge can also draw lines.

3. spraying glaze; Explained, the top glaze is the protective layer that protects the color of the top coat, and there are two kinds of top glaze, namely "bright glaze" and "matte glaze". After the topcoat color is applied, you must wait for the topcoat color to dry before you can spray the topcoat! After the glaze is sprayed, as long as the color of the topcoat is the same as the color of the tile, and there is no color difference, the tile repair is completed.