Underfloor heating renovation issues. What are the methods of underfloor heating renovation

If it is a wall-hung stove, the floor heating is all circulating water, it is not recommended to take another one, you can consider installing a small kitchen treasure, and the cost of another one is relatively high.

How much is the installation of floor heating, mainly depends on the equipment you choose, the installation of floor heating mainly consists of boilers, pipes, water separators, thermostats, auxiliary materials, labor, etc., of which boilers, water separators, pipes and labor are a relatively high proportion of the part, labor not to say, each place is different, labor costs are not the same, the choice of boiler mainly depends on what brand you choose, how much power, etc., different ** is not the same, the pipeline is also mainly based on the brand, the water separator depends on the brand you choose and the material, etc., Therefore, it is not easy to say how much it is, it is recommended that you find a few more local markets to ask, so that you can do it, Shure floor heating free door-to-door measurement, plan, design.

1.Friends who have done floor heating should know that the laying process of floor heating requires a 2cm thick insulation board and a 5 cm pipe layer, and then lay floors or floor tiles on it, so it is not recommended to transform the floor height. If the floor height is about 8 cm higher than the average floor height, it can be changed.

When the house was renovated, it was decided to lay wooden floors on the floor, and it is not recommended to change it to underfloor heating. Because there is a keel at the bottom of the wooden floor, laying underfloor heating under the wooden floor is easy to damage the pipes and even affect the heating effect. Central heating cannot be changed to floor heating, because it was illegal to change it last time, and the impact is very big after the change.

2.The main reason is that the floor heating itself has a long pipe, and there will be a certain amount of water resistance. If you change the underfloor heating, it is likely to affect the heating effect of other households.

So it can't be changed at will. If you want to change, you need to obtain the consent of the developer or property company, and then it depends on whether it meets the requirements of the transformation. The main difference is that the range of heating is not the same.

The heating of the community includes the entire range of the community and does not include other areas, so the range is relatively small.

3.The temperature of hot water** for central heating is around 60-90. Heating systems that are directly connected to the floor can cause excessive temperatures, which can cause discomfort to the human body due to high surface temperatures, and will also cause excessive wear and tear on the heating system.

This problem can be solved by installing a mixed water cooling device for underfloor heating and a mixed water cooling center in a centrally heated home. Another method is to abandon central heating and use wall-mounted gas stoves and underfloor heating pipes to form a separate single-family heating system.

4.It is important to consider that if you use this method, it is best to negotiate with the developer when buying a house, because people from the property management company will generally not agree. Because the long underfloor heating pipes will lead to high water resistance, which has a certain impact on the central heating system.

However, this method can save a lot of later operating costs. If you live in central heating, but want to change the floor heating, then first find the main pipe where the heating is located, then cut off, remove the original heating, and then connect the floor heating main pipe, introduce the new main pipe into the kitchen or bathroom, and then connect the necessary equipment, and then lay the floor heating coil according to the normal floor heating installation process.

The community is central heating, and you can also choose to change the floor heating yourself, because the effect of floor heating is better, and you can choose to ask the property in your own community before changing it, or whether you can use the change.

You can change it according to your own needs. If you decorate by yourself, as long as it does not affect the public interest and does not affect other owners, you can change the floor heating, and it will be warmer to add a heating method.

No, because the community belongs to the heating method of central heating, so if you change the floor heating yourself, it may cause greater trouble to the community.

Yes, but you should ask a professional to modify the floor heating, pay attention to the decoration situation, and be sure to avoid all aspects of risks.

Central heating can be converted to underfloor heating, but the heating company will not allow users to modify it at will, and they will no longer be responsible for the temperature and plumbing. If you are sure to change, you need to pay attention to the following issues: 1. The quality of the floor heating pipe 2. The level and process of the construction team 3. It is best to spare a set of gas boilers, in case the central heating is not hot in the future, you can also use the boiler (one-time investment may be large, but if the cost of using a gas boiler is not high, and there is hot water at any time, you can switch and adjust it according to the situation.)

In order to ensure that the underfloor heating does not leak, a pressure test must be carried out after the renovation is completed to confirm that there is no leakage. When the renovation team enters, it is strictly forbidden to knock directly on the ground, or punch holes and nails. At the end of the project, before laying the floor, it is recommended to press again to ensure that nothing goes wrong.

As long as the construction is reasonable, there is generally no need to worry too much about water leakage. Hope mine can help you.

The commonly used heating method in northern China is central heating, but with the improvement of people's quality of life, floor heating has become the new favorite of the heating industry due to its high comfort, so many families have the idea of changing the central heating at home to floor heating, so what problems should be paid attention to when changing central heating to floor heating?

1. The first thing to pay attention to is to find whether the installation unit technology is excellent, the original central heating system is designed and completed by professionals, and has undergone a water pressure test before use, if you want to change the central heating to floor heating, you need to re-lay the pipeline, if the professionalism of the installer is not strong, the water pipe docking is prone to problems, resulting in accidents caused by water leakage.

2. The water temperature of central heating is higher than that of floor heating, so when changing central heating to floor heating, the water temperature of central heating can be adjusted to below 60 by using a water mixing device, so that it is more consistent with the requirements of floor heating water supply temperature.

3. The floor heating needs to use a separate low-temperature water circulating water pump for central heating, and a three-way thermostatic valve is also needed to control the water temperature when controlling the water temperature, and the water temperature of each room is regulated by using the water collector and distributor, which will reduce the investment in heating costs, but in the process of use, the impurities existing in the centralized floor heating water supply are easy to run into the floor heating coil, causing the blockage of the floor heating coil, in order to avoid the occurrence of this phenomenon, it is recommended that you install a water filtration device.

4. There is another way to change central heating to floor heating, that is, to install the plate heat exchanger in front of the water separator, so that the heat of central heating can be converted into the heat source of floor heating, and there is no need to worry about impurities blocking the floor heating coil, but also to enjoy the convenience and comfort brought by floor heating.

Summary: The relevant content of what problems should be paid attention to in the transformation of central heating to floor heating is introduced here, I hope it can help you. In the process of central heating, the lower the temperature of the floor heating water supply, the less impact it will have on other households, so as long as the efficient and clever floor heating system of 35 degree heating is used, it is feasible both in terms of regulations and technology.

In winter, everyone has a warm environment to ensure our residence, so the way of heating is very important. There will be many ways to heat in our lives, but everyone's favorite is our floor heating, because it is relatively clean, and the heating effect is also the best. Let's take a look at it with usUnderfloor heating retrofitWhat are the ways to do it?

1. What are the methods of floor heating transformation.

1. The first step is that if you live in a central heating location, but you want to change the floor heating, it seems to be understood. Floor heating renovation first to find the main pipe where the heating is not located, and then cut off, remove the original heating, and then connect the main pipe of floor heating, introduce the new main pipe into the kitchen or bathroom, and then lay the floor heating coil according to the normal floor heating installation process.

2. The second step is that if it is independent heating to floor heating, you can operate in this way. The main pipe connected to the wall-hung boiler and the radiator can be cut off directly, and the inlet and return water of the floor heating can be connected to the heating inlet and return water of the wall-hung boiler after the floor heating transformation.

3. The third step is. If the old house is changed to floor heating, pay attention to our safety. We must first analyze the original heating connection form, one is heating in series, and the other is heating in parallel.

Floor heating renovation is often not recommended for everyone to change the floor heating in series, which may affect the heating of the downstairs neighbors, and only need to pay attention to the impact of the floor heating installation on the indoor height when changing the floor heating, and the impact on other aspects is not large.

Second, what are the types of floor heating?

1. Wet floor heating has a very good heating effect, because it appeared earlier, and now the installation process has matured. Therefore, there are many people who choose it, and 90% of the floor heating installed in modern homes is wet floor heating. The heat inside the pipe is dissipated through the concrete.

The cost of wet floor heating is much lower than the cost of other floor heating, and the wet floor heating will increase the load per square meter of the building when the concrete is completely dry, which is 8 times the load per square meter of the building where the radiator is installed.

2. The heating effect is very good, there are heating cables, and low-temperature heating cables to heat the floor. It is also particularly energy-saving and environmentally friendly. Compared with water floor heating, heating cable heating has no pollutant emissions, and is highly controllable, relatively simple to install, and saves space.

Moreover, the electromagnetic emissivity of the single core of the two heating cables of single-core cable and double-core cable is higher, which is more suitable for outdoor heating, while double-core cable is more common in home heating.

3. The heating effect is very good, and there is electric heating film floor heating. Electric film floor heating is based on geothermal film as the heat source, so it is cheap and easy to use. The advantages of electric disturbance state thermal film heating are basically other electric floor heating, but the disadvantages of electric heating film heating can not be ignored

The safety factor is low, the connection without ground wire is prone to electric shock, the electromagnetic radiation is high, and it is not energy-saving.

Heating is a big thing for us in winter, and it must be a bigger thing for retrofits. So everyone should remember to pay attention to safety. It is recommended that you find a professional person to modify.

Summary. If the heating company does not care about whether it is heating or not, the following methods can be adopted: 1. Collect evidence, and if it is the problem of the heating company, you can sue.

2. If it is a pipeline problem, directly find the heating company for maintenance. 3. If the reason has been clarified and the heating company does not solve it, it can complain to the mayor or report to the next level.

If the heating company does not care about whether it is heating or not, the following methods can be adopted: 1. Collect evidence, and if it is the problem of the heating company, you can sue. 2. If it is a pipeline problem, directly find the heating company for maintenance.

3. If the reason has been clarified and the heating company does not solve it, it can complain to the mayor or report to the next level.

What kind of unit does the heating company belong to? The heating company is under the management of the district heating office to which the heating company belongs, and the superior unit is the municipal heating office. The heating department is the heating industry management office (abbreviation:

Heating Office), which is subordinate to the Construction Committee (or the Urban and Rural Construction Committee, the Housing and Urban-Rural Development Commission, and the Housing and Urban-Rural Development Bureau), and most of them are directly affiliated public institutions. The main responsibilities of the Office include: participating in the preparation and responsible for organizing the implementation of long-term, short-term and annual implementation plans for central heating; Participate in the preparation of the feasibility study of the central heating construction project; Responsible for the implementation of industry management of central heating enterprises.

What are the main functions of a heating company? The main function of the heating company is to publicize, implement and implement the national, provincial and municipal policies on urban heating, and participate in the formulation of local regulations and normative documents. 1. Responsible for guiding the heating management of various districts, cities and counties.

2. According to the overall planning of the city, in conjunction with the relevant departments, the special plan for urban heating shall be prepared and carefully organized and implemented. 3. Responsible for the examination and approval of new construction, reconstruction and expansion of urban heating projects. Organize the review and demonstration of key heating projects, and carry out acceptance registration and filing of heating projects.

4. Responsible for the supervision and management of the urban heating industry. 5. Responsible for accepting complaints from heat users about the heating quality and service of heating enterprises, coordinating and handling disputes between the two parties, and inspecting the implementation of the "Heating Contract". 6. Responsible for the operation and management of urban heating facilities, supervise and inspect the operation parameters of heating facilities, and ensure the safe and stable operation of heating facilities.

7. Responsible for the promotion of new technologies, new processes, new materials and new equipment for national, provincial and municipal heating projects. 8. Responsible for accepting and answering the consultation of heat users on heating policies.