Will the renovation of floor heating in your own home cause the roof downstairs to leak?

This situation is still very small, as long as you pay attention to it in the process of construction, after all, the thickness of the floor slab can still be more, but it is better to be careful.

There is a possibility of seeping downstairs, just pay attention to yourself.

No, but it is not necessary to have a professional underfloor heating person do the renovation and installation. So as not to encounter some unnecessary trouble.

We all know that many things have a useful life, and various problems will arise after a long time. Floor heating leakage is a very troublesome thing, let's take a look with me!

To see the leakage area and the amount of water leakage, if it is in the bedroom, living room and other areas without waterproof treatment, it should be noticed downstairs first.

Therefore, when installing plumbing, we must pay attention to the quality of plumbing pipes, and at the same time, we must also pay attention to avoid sharp objects damaging plumbing pipes, which have relatively high requirements for construction.

If the plumbing pipe leaks, the floor will definitely be very damp, with watermarks and even obvious water, because the plumbing coil has a lot of water, and it is also easy to be damaged by external forces, such as electric drills or something.

The radiator is relatively safe, because the pipe material of the radiator is not the same, and it is basically not easy to break, and there is an iron cover on the outside. If there is a water leak, the surrounding area will also be very damp and have a watermark.

If there is a leakage, look at the pressure of the heating stove, and if it is pressed off very badly, then there is a problem.

1. Observe the change of pressure gauge.

Under normal circumstances, if there is a water leakage in the floor heating, the pressure gauge of the floor heating will drop and the pressure will become smaller.

If the leakage is relatively slow, we can first stop the operation of the pipeline, and when the temperature of the other floor heating drops to the normal temperature, inject hot water into the pipe to increase the pressure, we can test it one by one by closing the valve on the water separator, and then observe the pressure gauge.

2. Determine the water leakage circuit.

Open the valve of each circuit, and then observe which circuit has the phenomenon of pressure reduction, the circuit with obvious pressure reduction is the water leakage circuit.

3. Determine the water leakage area.

When the temperature is heated to a constant temperature, the indoor floor temperature area is stable, and then the temperature inside the room is tested with an infrared tester.

4. Determine the leakage point.

After we know the leakage area, we will begin to judge the leakage center, and the temperature of the leakage location is the highest, so we can judge the approximate location of the leakage, and if we need to deal with it, we only need to dig and repair the approximate location.

Summary. To determine if there is a leak in the underfloor heating, the pipes must be tested for pressure. The pressure test needs to be carried out in the state of complete closure of the pipeline, if it is found that the valve cannot be completely closed in this link, and its function fails, then the next process cannot be operated.

My home is underfloor heating, the surface of the building does not leak, **water leakage may make the roof downstairs leak?

To determine if there is a leak in the underfloor heating, it is necessary to perform a pressure test on the pipes. The pressure test needs to be carried out in a completely closed state of the pipeline, if it is found that there is a valve that cannot be fully closed or fully closed in this link, and its function fails, then the next process cannot be operated.

No, don't pretend. Generally speaking, if the geothermal pipe is really leaking, the place where the water seeps from the roof of the downstairs must be the place where the pipe is damaged and the water is out. Because the bends are not uniform in the thickness of the ground, the water flows to a lower location, or to a joint in the underfloor heating reflective film, where it collects.

It is only after the building materials in this area are saturated with dry water that they begin to infiltrate.

The top of the downstairs neighbor's living room is leaking, and it is suspected that it is a floor heating problem in my house, what should I do?

The top of the downstairs neighbor's living room is leaking, and it is suspected that the floor heating problem of my house is the first to find the property. In the event of water leakage on Knowles Kai, one is to prove that it was not man-made to damage it, if so, then it is responsible for oneself, and the other is to find out that the water leakage on the upper floor is the responsibility of the neighbor. The third is to see whether the house or Sun Bei is not within the warranty period, if the house leaks water is not man-made, and it is still within the warranty period, the developer is responsible.

If you suspect that there is a leak in the floor heating, you can find a floor heating maintenance company to conduct a pressure test and find the identified leakage point, as long as you open a small piece of tile or wooden floor. Then distinguish the responsibility for the accident and envy

If a water leak is found, it means that some places are wet, and it is generally wet or dripping downstairs.

1) Determine the location of possible leaks on the floor of your home according to the dripping or wet places downstairs.

2) Remove the floor or floor tiles here, remove the infill layer, expose the floor heating pipes, and apply proper pressure (in the heating state, it is OK not to press). Observe the location of the water leak.

3) If the leak is not in this position, observe the direction of the water flow from this time to see which direction it is coming from, and continue to planing along this direction until the leakage point is found, sometimes a meter or two or more will be gouged.

1. What are the causes of floor heating leakage?

1) The material of the floor heating pipe.

Floor heating leakage should be checked from multiple positions one by one, the first thing to pay attention to when installing floor heating, floor heating pipe in the selection of materials, we must pay attention to the quality of floor heating pipe to be guaranteed, floor heating pipe is the carrier of water floor heating, if the floor heating pipe is damaged, the pipe must be replaced, the whole replacement process will also affect the decoration of the floor, maybe the floor also needs to be renovated, and now the normal use time of the floor heating pipe can reach 50 years.

2) Construction problems in the installation process.

After ensuring the quality of the floor heating pipe, it is necessary to test the skill of the installation master, most of the reasons for the floor heating leakage are caused by improper construction in the installation process, under normal circumstances, the requirements of the construction of the floor heating hole mold pipe are usually three points of equipment, seven points of installation, so it can be seen that the construction of the key to the use of the effect of the floor heating pipe.

3) Post-maintenance.

The floor heating pipe will be cleaned once a year before use, and when cleaning, it is possible to disassemble and assemble the situation of leakage, and it is easy to clean the floor heating pipe without permission, so if necessary, please contact the relevant company departments to solve the problem. If the owner disassembles and installs the floor heating equipment privately, the owner shall be responsible for the loss.

Second, what to pay attention to when installing floor heating.

a) The details of underfloor heating pavement are very critical. Because the pipe layout is very complex, not only the spacing and laying shape must be calculated, but if the pipe laying is unbalanced, it is easy to cause the phenomenon of local heat. If the quality of the insulation material is poor, it will also dissipate the heat underground, affect the indoor temperature, and will also cause the release of harmful substances.

2) The choice of filling, generally made of fine stone concrete, which is also a structure that protects the underfloor heating pipes and uniform ground temperature. Generally, it is fine stone concrete, the diameter of gravel particles should not exceed 1cm, and the volume ratio of cement mortar should not be less than 1:3.

The concrete pouring height is 4cm. It needs to be leveled manually, not with an oscillator.

3) Commissioning will be carried out after the completion of floor heating. This point must be remembered, after the installation of the manifold, the floor heating must be commissioned, and the floor heating system without debugging cannot be used. Commissioning the entire system with all water, electricity, hot water and return water in order**.

During the commissioning process, after the commissioning is completed correctly, it is also necessary to go to the site to supervise and sign the simple word.

Fourth) in the installation of floor heating can not be punched, so as not to leak the floor plus the first ring damage, decoration is completed, after the floor is also forbidden to drill, nail, if accidentally through the floor heating pipe, it can be very troublesome to solve.

The upstairs floor was changed to warm up, and the new house downstairs suffered.

The residents of the downstairs source can find the relevant departments to identify the losses suffered, and after the identification, if it is the cause of the upstairs, they can request the upstairs residents to immediately stop the infringement and repair it in time with the report, and can request the adjacent party to compensate for the damage caused during the repair.

If the upstairs occupants do not cooperate, the injured party can file a lawsuit in court.

Article 83 of the General Principles of the Civil Law of the People's Republic of China provides:

The adjacent parties to the immovable property shall, in accordance with the spirit of conducive to production, convenient life, solidarity and mutual assistance, fairness and reasonableness, correctly handle the adjacent relationship in areas such as water interception, drainage, passage, ventilation, and lighting.

Where obstructions or losses are caused to neighboring parties, the infringement shall be stopped, the obstruction removed, and the losses compensated.

If the adjacent party does not comply with the court's judgment, the injured party can ask the construction team to repair it from the next door, and the expenses incurred can be filed with the court to claim compensation from the owner next door.

If the neighbor does not pay compensation, you can apply to the court for enforcement.

It can be resolved through negotiation.

If the negotiation fails, you can hire a housing appraisal agency to assess the extent of damage to the house, determine the damage repair, and then claim compensation according to the appraisal conclusion.

It is also possible to go to the court for litigation and the court will appoint an appraisal agency.