What should I do if the toilet flushes and can t float down?

The float under the toilet flush tank is probably supposed to be dialed by hand, and if you flip it, it will go down, and the water will continue to flow.

It should be that the height knob of the float and the connecting rod is not set, you can twist it or adjust it by putting the line long and short, the purpose is to make the float and the connecting rod just close to the level and will not be stuck.

If you don't adjust yourself well, brand toilets.

You can find the after-sales of the toilet to deal with, if not, first call the engineering staff of your community property company to help adjust it, they have seen more, it should be able to solve, if these are useless, either you will change the accessories or you will change the toilet.

1. The oldest kind of cloth-strip mop, after being stained with water, poke it hard in the eyes of the toilet. 2. Use a small basin or something similar, buckle it upside down, press down hard, and wear gloves. 3. Find something like wire to unclog the toilet blockage.

Answer: Hello, the toilet can't float down after flushing, you can cover the surface with toilet paper towels and let it be flushed again.

The easiest solution is to replace the inlet drain valve in the toilet.

The inlet drain valve of the toilet.

That's clogged, use that toilet plug, get a few more times, or replace it with a new one.

The toilet has to be suspended every time it is suspended before it is put on the water! Hello, glad to answer for you. The reason why the toilet has to be suspended every time it is suspended is solved as follows:

The friction between the float sock and the slide bar is large, or the buoyancy of the float limb is uneven before and after or left and right. You can close the water inlet valve to empty the water, use fine sandpaper to polish the slide rod around the up and down direction, try to make it smooth, it may be that the water level is too high, or it may be that the water inlet valve is broken, after this situation occurs, you must remember to close the corner valve at the first time to stop the water. The next step is to take a closer look at what is wrong

1. If the inlet valve is broken, it is recommended to replace it with a new one, and it is recommended to choose the original inlet valve to avoid the situation that it cannot be installed. 2. It may be that the rubber pad in the water inlet valve is dirty, and after sticking to foreign objects, there is no sail to work normally, and it needs to be removed and cleaned, and it can be continued. 3. It may be caused by the water level setting too high, you can find the cross groove on the float valve, snap the screwdriver into this groove, and rotate to the left to reduce the water level, and at the same time solve this problem.

Hope mine can help you! Do you have any other questions?

This is because the toilet is clogged and the unclogging is as follows:

1. Go to a 2 yuan store or grocery store to buy a manual dredge (something that looks like a spring) and dredge it yourself.

2. Pier cloth method: use mopping pier cloth. First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth.

Then press the cloth hard and stuff it into the toilet bowl as much as possible. Finally, lift the cloth as fast as possible, and repeat this action, the contents of the toilet will be sucked out, and the pipe can be unblocked.

3. Find a longer section of plastic water pipe, connect tap water at one end, plug the toilet mouth with the other end, and then block the toilet mouth with rags or something. This method can also solve the clogging problem.

A toilet, also called a toilet, is a bucket with a lid for urinating and urinating. The invention of the toilet is known as a great invention, which solved the problem of people eating and drinking in and out of Lazar. Later, it gradually evolved into a flush toilet using the principles of siphon, spiral siphon, and now the latest jet siphon and super-siphon type.

There are also people who believe that the flush toilet is the root of all evil because it consumes a lot of domestic water. There are many classifications of toilets, including split and conjoined. With the development of science and technology, many novel varieties have also appeared.

According to the matching method of the toilet seat, it can also be divided into ordinary toilet and smart toilet. Smart toilets can also be further divided into automatic set change smart toilets and non-automatic set change toilets, the former includes automatic set change plus flushing, automatic change set with flushing and drying and other different types.

The history of the toilet can be traced back to the Han Dynasty, when the toilet was called Huzi, which was dedicated to the emperor, and legend has it that it was made of jade. It was held by eunuchs who served the emperor at any time. Later, in the Tang Dynasty, because there was a person named Li Hu in the emperor's family, in order to avoid secrecy, he changed the name of Huzi to Beast or Mazi.

After that, in the circulation, it evolved into the name of the toilet.

The daily maintenance of the toilet bowl is as follows:

1. The user cleans the toilet at least once a week.

2. If the water source of the user's location is hard water, it is necessary to keep the outlet hole clean.

3. Frequent turning of the toilet seat will cause the fastening washer to loosen, please tighten the cover nut.

4. Do not knock or step on the sanitary ware.

5. Close the toilet lid and don't be too fast.

6. When the detergent is poured into the toilet, do not close the machine immediately, and close it after rinsing with water.

7. Do not use high-temperature water to scald the sanitary ware.

If the toilet is always on the water, maybe it is a problem with the water tank, you can check whether the material or parts of the water tank will be too old, because some small parts are relatively unused, and it will not take long for the phenomenon of damage, if it is used for a long time, there will be problems, then it is a phenomenon of natural wear and tear, as long as it is replaced, the phenomenon of leakage on the toilet does not stop and cannot be eliminated, it may be because of the sewer pipe, because the function of the sewer pipe is used to connect the toilet tank, It is also possible for a major conveyor pipe to have this problem.

The toilet water restriction air buoy has leaked and needs to be replaced with a new buoy. Because the buoy is the mechanism that controls the water stop valve, the replacement of the air buoy can achieve the function of controlling the valve.

Summary. How to choose the toilet at home.

1. The heavier the quality, the better.

The toilet bowl weighs about 50 catties, and the *** point is about 100 catties, which is heavier and stronger in comparison.

2. The toilet is not bought casually.

First of all, you should measure the pit distance reserved for the toilet at home, and choose the right toilet according to this distance.

3. Pay attention to the appearance of the toilet.

The glaze is very smooth and uniform in terms of color. You can tap it gently with your hands, and then you can hear a crisp and transparent sound. There is also a way to draw on it with a water-based pen, and if it is easy to wipe it, it means that the texture is better.

What should I do if the toilet floats up and still comes out of the water.

1. The first reason is that the flap is not covered, just resting on it, as long as you move it when you slow the potato, if there is a leak on the flap cover, you need to change the flap. 2. If the float is resting below, there is no way to stop the water, and you only need to manually count it. 3. If the float's water-stop valve has no way to stop the water, or it has been running, it needs to be replaced.

How to choose the toilet at home 1, the heavier the quality, the better the toilet about the weight of about 50 catties, the *** point is about 100 catties noisy, in comparison, the heavier is stronger. 2. The toilet is not just to buy first, you must measure the pit distance reserved for the toilet at home, and choose the right toilet according to the orange and distance. 3. Pay attention to the appearance of the toilet.

The glaze is very smooth and uniform in terms of color. You can tap it gently with your hands, and then you can hear a crisp and transparent sound. There is also a way to use a water-based pen to draw on it, and if it is easy to wipe it, it means that the texture is better.

4. Note that if the glaze is relatively thin, the overall appearance is relatively rough, and there may be sewage seeping into it in use, which is easy to become dirty and worn. 5. Pay attention to the flushing method, which will affect the sewage discharge capacity of the toilet, for example, the pipe mouth of the cavity is larger, and it will not be blocked, but the sound is loud to use, and the siphon can not flush off the large dirt, which is suitable for home use.