How do I remove urine alkali from a toilet?

The hard and old dirt of the toilet bowl can be removed with vinegar, pour the vinegar mixed with cold water into the toilet, soak for half an hour and then brush off the dirt with a brush, you can also pour hot water mixed with baking soda into the toilet, soak for 20 minutes and then brush off with a brush, or pour detergent directly into the toilet, and then wipe the dirt with sandpaper and clean it with water.

The urine alkali in the toilet can generally be removed with acidic solvents, such as:

The urine test in the toilet can be removed with a special detergent, sprayed with detergent, cleaned with a brush and then cleaned with water again.

How to remove the urine alkali on the urine bucket, you need to put the water out of the toilet, and then sweep the dirty place with detergent and other things, after 10 minutes, use a brush, the effect is better and then clean it is cleaner, but when cleaning, remember to bring a mask, remember to open the window for ventilation after cleaning, and use dilute hydrochloric acid, because hydrochloric acid has the strongest ability to dissolve alkali. However, concentrated hydrochloric acid should not be used, because concentrated hydrochloric acid can corrode sewer pipes. If it's not very serious, just brush it vigorously with a brush.

How to remove urine alkali from the toilet, use a toilet cleaner to clean, which can not only remove urine alkali but also remove the stains of the toilet.

Suck the water in the toilet drain with a dry cloth, drop in light sulfuric acid, or go to the toilet to soak it, and then wipe the urine stains with a soft brush to remove them.

Pour some white vinegar and soak it for about ten minutes, white vinegar has the function of softening the substance, which can soften the dirt first and reduce adhesion. Then sprinkle some baking soda on top of the dirt, baking soda has certain alkaline characteristics and can effectively clean up the dirt.

This is very simple, remove the urine tightness on the toilet, it is alkaline, you can use sodium acid to treat it with strong acid, such as sodium hydrochloride, sulfuric acid, but this strong corrosive recommendation is to seal the environment, and then enter it a day later.

Hello friends, this can be cleaned with toilet cleaner or stain remover, the toilet needs to be cleaned frequently, keep it clean, thank you.

How do I remove urine alkali from a toilet? This situation is very simple, you can directly use some special toilet washing that is very good to wash, that is, clean the toilet, but the smell is too strong, you can also use some of this Coke, and this toothpaste in it.

It is recommended to use a special scavenger for this kind of thing, and if the scavenger is useless, then there is really no way.

Generally speaking, it is possible to consider using some vinegar essence to remove it, after all, the effect of acid-base combination is relatively better.

You can pour some acidic substances into the toilet to fully react with alkali and acid, and then use a brush to brush it gently.

Nowadays, there are a lot of detergents that are specifically used to clean toilets. If you don't use some acidic cleaning agent, you can do it.

It's easy! Buy a bottle of toilet cleaner. Use it to remove urine alkali from the toilet. Or put blue bubbles in the toilet tank.

Now the detergents used to remove urine tests are very good, go buy a bottle, and use it at home according to the instructions. It's really very easy to use, and it's very clean when you soak it in a flush.

How do I remove a urine test from a toilet? Because we are in the factory, we have hydrochloric acid, and we use hydrochloric acid. Then the brush fell off with a light brush.

This one has a special cleaning agent, you can go to the supermarket to find it.

How to remove urine alkali from the toilet:

Preparation: white vinegar, edible alkali, toilet brush.

Step 1: Pour 15ml of white vinegar into the toilet (white vinegar contains acetic acid, which can dissolve the urine alkali in the toilet).

Step 2: Then pour an appropriate amount of edible alkali into the toilet (edible alkali can effectively decompose the urine alkali in the toilet).

Step 3: Then use a toilet brush to carefully scrub the urine alkali inside the toilet.

Step 4: The urine alkali in the toilet has been removed.

To remove urine limescale from the toilet, you need to prepare: a bottle of Coke, a bag of salt, and a brush.

1. First of all, take out a bag of salt, and pour an appropriate amount of salt on the urine alkali scale of the toilet.

2. Then take out a bottle of Coke and pour an appropriate amount of Coke on the urine alkali scale of the toilet.

3. Take out the brush below and brush the urine alkali scale on the toilet.

4. Next, press the flush button on the toilet and rinse the toilet clean.

5. Finally, you can see the urine alkali scale on the toilet and clean it.

Urine alkali and limescale can be removed with dilute sulfuric acid. You can open the glue under the toilet and take it off, and then soak it in dilute sulfuric acid to remove the scale.

It is recommended to use Chaowei toilet cleaner about 6 yuan, which should be able to remove dirt, pour the leftover cola into it, and flush it after an hour.

1. Soaking.

Choose a toilet cleaner, available in supermarkets, and soak according to the instructions for use.

Second, scrubbing. Use a tool (toilet brush) to scrub the urine scale.

3. Wash it multiple times.

Generally, the first cleaning is not complete, and the next cleaning is required until it is cleaned.

The sewage pipe of this kind of toilet must not be glazed, it is old-fashioned, and most of them are glazed now, if you buy a cheap pipe, it may not be glazed pipes that are not easy to accumulate urine alkali and scale.

Let's change the toilet.

Go to the supermarket and buy toilet detergent, pour some into it and let it sit for a while, and then wash it again.

Toilet Cleaner, spray Toilet Cleaner, soak for a period of time (the longer the month) and scrub with a brush.

Stubborn urine alkali can be scrubbed with sulfuric acid soaking.

Pay attention to ventilation and wear a mask when brushing so as not to harm the body and respiratory system.

In fact, it is caused by improper maintenance.

Suggestion: Use a plastic bag with good texture, fill it with rag heads, and block the toilet drain so that the water in the toilet bowl does not flow away from the drain. Then fill the toilet bowl with an appropriate amount of strong acid and water (depending on the severity of the urine alkali), soak it for several hours, take out the filler and brush it.

Repeat it several times, the urine alkali in the toilet bowl will be removed, and then rinse with water, try it.

Stubborn urine smear in the urinal can be removed in the following ways:

1. Spread the toilet paper on the inner wall of the urinal one by one, then spray it with toilet cleaner or leftover Coke, let it stand for an hour, then rinse it off with water, and finally gently scrub it with a brush. Not only does this method require no strenuous brushing, but the cleaning results are also excellent.

2. Pour the mixture of vinegar and water into the toilet, soak it for half a day for a few hours, and then rinse it off with water, which can have the effect of disinfection and deodorization.

3. Sprinkle 1 2 cups of baking soda in the toilet bowl and brew with hot boiled water for half an hour to remove lighter dirt.

4. Before stubborn yellow rust spots appear in the toilet, clean them frequently with baking soda. Sprinkle baking soda on the inside of the toilet bowl for 10 minutes, then wash it with a toilet brush.

5. Put an appropriate amount of water in the toilet bowl first, clean it with a toilet brush, then pour in 5 10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush, and then scrub it. If the dirt is heavy, you can pour a little more detergent to soak and brush until it is clean.

There are two common approaches at present.

One is to remove by friction, using a metal brush, to remove the stain powder, which is very laborious.

One is chemical removal, which uses an acidic solution (such as hydrochloric acid, but it tastes bad). There are many brands on the market that have clean toilets, generally blue liquid, pour it up, after a period of time, it will be dropped by a brush, this is very collapsed and convenient at night without effort (that is, the taste is not very good at night), and it is sold in supermarkets.

Regular washing will not leave urine alkali, if it has been left, after removing it with a strong toilet cleaner, it is enough to keep it clean every day.

Pour some oxalic acid in it and it should be fine.

Hydrochloric acid, toilet cleaner, and 84 can all remove urine alkali.

1. How to deal with the urine alkali in the toilet.

2. How to remove the urine alkali in the toilet bowl if it is too thick.

3. How to remove the urine scale of the toilet is already very thick.

4. What is used to remove the urine alkali in the toilet?

1.You can use a mixture of vinegar and water to remove the urine alkali in the toilet, and baking soda, cola, shampoo, laundry detergent, toilet purifier, etc. can also remove the urine alkali in the toilet.

2.After pouring baking soda and cola into the toilet, you need to soak it for a while to remove the urine alkali from the toilet.

1. White vinegar method Because vinegar is acidic, and the odor factor of the toilet is alkaline, when the two meet, a neutralization reaction will be produced, which will achieve the effect of removing odors, and vinegar also has the effect of sterilization and decontamination! All we have to do is put the white vinegar in the mineral water bottle, then poke a few small holes under the bottom of the water bottle, and then place the bottle in the tank normally. Every time you flush the water, some of the vinegar will flow out of the water and mix it in the water to flush the toilet bowl together.

That's what we're trying to do. Very clean. You can use a toilet cleaner to brush the area around the toilet bowl, so that it is not only clean on the inside, but also on the outside.

It not only avoids the yellowing of the inner wall of the toilet, but also effectively deodorizes.

2. Buy toilet cleaner.

At present, the toilet cleaner on the market can be removed, pour it directly on the toilet, soak it for a few minutes, and then brush it off with a brush.

1. Drop a circle of toilet cleaners along the top of the inside of the toilet.

2. The liquid will spread all over the inside of the toilet with the downflow, wait for a few minutes.

3. Take a toilet brush.

4. Wipe the inside of the toilet with the toilet cleaner.

5. Press the flush button of the toilet.

6. Clean water enters the sewer with the stains washed by the toilet cleaner, and the toilet is restored to clean.