How to repair a leaky toilet, how to fix a leaky toilet

If the bottom edge of the toilet is leaking, it is likely to be caused by a misfitting, a broken flange ring, or a loose toilet. In this regard, it is necessary to remove the toilet first and then reinstall it, and pay attention to the sealing must be in place during the period.

If there is a leak in the toilet tank, the cause is usually aging or damaged water parts. As a result, the water level reaches the set height, but the water parts in the water tank cannot close the water inlet in time, resulting in water leakage. In this case, the damaged water parts can be replaced in time.

Precautions for purchasing toilets:

1. When buying a toilet, you need to pay attention to the glaze of the toilet, generally speaking, if the quality of the toilet is good, then its surface must be smooth, rich and clean, this kind of toilet can last longer, and the probability of problems is relatively small.

2. Look at the caliber of the toilet, you can make a comparison with your fist, if the caliber is just about the same size as your fist, and the surface of the toilet is glazed, it means that it will be more convenient to use in the future, not only has a faster sewage speed, but also is not easy to hang dirty.

1.First, use a knife to cut the glass glue at the junction between the toilet bowl and the floor tiles, and then unscrew the bolts that hold the toilet open.

2.Raise the toilet a little higher. Never pull or push the toilet bowl into place. It is more troublesome to break the sewer pipe.

3.Then check the sewer pipe for cracks, and then connect a PVC pipe of the same thickness, stick it with PVC, put the toilet on the top and try it, maybe the length is not suitable, and then use a saw blade to see until the toilet can stabilize and stick to the floor tiles.

4.Test the water and it won't leak. Glue the base to the floor tiles with glass glue and tighten the screws to secure the toilet. Don't shake the toilet back and forth for three days. Just wait for the glass glue to dry.

The method of repairing a leak toilet is as follows:

1. If the edge of the toilet is leaking, first remove the surrounding rubber stains, replace the damaged chain rubber ring, install the toilet, and reapply the sealant.

2. If there is a leak at the bottom of the toilet, it may be that the sewage outlet is not aligned, and it is recommended to re-open the toilet to be re-opened, aligned with the sewage outlet, and sealed well.

3. If the toilet tank is leaking, the water tank should be disassembled, the water parts should be fastened, and sealed with glass glue, if the water tank is broken, it needs to be replaced.

How to choose a toilet

1. Weight. The heavier the toilet, the better, the weight of an ordinary toilet is about 50 catties, and a good toilet is about 100 catties. The density of the toilet bowl with large weight is high, and the quality is relatively passable.

2. a water outlet.

The drain hole at the bottom of the toilet is good one, and the more drain holes there are, the more it affects the punch. The water outlet of the bathroom is divided into lower drainage and horizontal drainage, and the interval between the drain ** and the wall behind the water tank should be measured, and the same type of toilet should be bought to sit at the opposite distance, otherwise the toilet can not be installed.

3. Glaze. Pay attention to the glaze of the toilet, the glaze of the toilet bowl should be smooth and smooth without blistering, and the brilliance should be saturated. After overhauling the glazed surface of the outer surface, you should also touch the drain of the toilet, if it is clumsy, it will easily cause hanging in the future.

4. Caliber. Large-diameter sewage pipes and glazed inner surfaces are not easy to hang dirty, and the sewage is rapid and powerful, effectively preventing blockage. Test method, put the whole hand into the toilet mouth, generally can have a palm capacity is better.

5. a water tank. Flush toilet storage tank leakage in addition to the significant dripping sound can be determined, generally not easy to find, simple inspection method is in the toilet tank dripping oak quietly into the blue ink of the beam, stir well to see if there is blue water flowing out of the toilet outlet, if there is a leak in the toilet.

Toilet leakage repair method: toilet tank leakage caused by water tank material problems, toilet tank leakage caused by drain valve failure, toilet tank leakage caused by sewer pipe failure.

1. The leakage of the toilet tank caused by the material problem of the water tank

The material of the water tank is not good or the internal parts of the water tank are old, which will cause the toilet tank to leak. Toilets made from inferior materials are often not visible on the outside, but small parts on the inside can cause damage due to infrequent use.

Solution: Separate the toilet tank and check it one by one to see if the parts in the toilet tank are in good condition. If there are parts that are broken, they can be repaired, and those that cannot be repaired are best replaced.

If the pump tank is too inferior and there is more damage, it is recommended to replace the entire tank to avoid more serious consequences.

2. Leakage of toilet tank caused by failure of drain valve

The drain valve of the toilet is mainly responsible for the water pressure of the toilet tank, and in general, many situations may be a problem with the toilet drain valve. It may be due to cracking and deformation of the mounting holes, or a series of reasons caused by carelessness during installation.

Solution: Since the drain valve needs to be tested with many professional tools, it is recommended to have a professional repair it.

3. Leakage of toilet tank caused by sewer pipe failure

The leakage of the toilet tank may also be due to the problem of the sewer pipe, which is a pipe that transports water to the toilet tank, and there is a great possibility that the toilet tank will leak due to a problem.

Maintenance method: Carefully check the interface between the toilet bowl and the sewer pipe to see if it is loose or whether the pipe is broken. If so, the pipes need to be replaced; If it is just not connected, you can use some wire or fixing material to fix it.

Tips for choosing a good toilet

1. The glaze should be smooth and smooth: when purchasing, you should check whether the sewage outlet is glazed, and you can even put your hand into the sewage outlet to feel whether the water bowl has glaze. The main culprit of hanging dirt is the poor glaze, and the qualified glaze must have a delicate feel.

2. The details of workmanship cannot be ignored: the quality of porcelain is directly related to the life of the toilet. The higher the firing temperature, the more uniform it is, the better the porcelain, so that the water absorption rate of the toilet is low, and it is not easy to suck in sewage and produce peculiar smells.

When purchasing, you can gently tap the toilet bowl with your hands, if the sound is hoarse, not crisp and loud, it is likely to crack, or the product is not cooked.

3. The quality of the water parts of the water tank should be passed: when purchasing, the water parts should be pressed to the end, and it is best to hear the crisp sound of the button. High-quality water parts have low water filling noise, are durable and durable, and can withstand long-term soaking in water without corrosion and scale. Staring.

Summary. Hello Dear Kiss The questions you asked, here are the following answers for you: 1. The reason for the leakage of the toilet 1. The toilet was not installed properly when it was installed, resulting in the misalignment of the sewage outlet on the ground and the toilet sewage caliber.

In this way, yellow water, water and foul smell will come out. 2. The installation is not professional, and the flange is not installed (the flange has a good fixing and anti-spill effect) 3. Long-term use is suitable for the loosening of the toilet and the ground. 4. The toilet toilet itself is a problem with cracks in the ceramics.

5. The internal parts of the water tank are aging 6, there is a problem with the water inlet group or the water outlet group of the toilet 7, and the water tank of the flush toilet is leaking.

Second, how to fix the toilet leakage 1, if it is installed in a specialty store, it is usually padded with a sealing ring inside, and the toilet is placed with glass glue around it. Tools to prepare: utility knife, (if you need to disassemble the angle valve) water adhesive tape, wrench, glass glue and glass glue gun.

Toilet seals (need to be replaced if removed). 2. If it is a decoration of plumber and electrical tooling, it is usually made of white cement. Prepared tools:

Slotted screwdriver (used to eliminate the original white cement), white cement (when reloading, first mix the water at the bottom of the toilet, then put the toilet seat up and put it steadily, and then use the mixed white cement to seal the toilet footsteps in a circle, and when it is dry, it can be used.) Be careful not to let the white cement fall into the pipe, otherwise it will cause the pipe to be blocked.

How to fix a leaky toilet.

Hello Dear Kiss The questions you asked, here are the following answers for you: 1. The reason for the leakage of the toilet 1. The toilet was not installed properly when it was installed, resulting in the misalignment of the sewage outlet on the ground and the toilet sewage caliber. In this way, yellow water, water and foul smell will come out.

2. The installation is not professional, and the flange is not installed (the flange has a good fixing and anti-spill effect) 3. Long-term use is suitable for the loosening of the toilet and the ground. 4. The toilet toilet itself has a problem with cracks in the ceramics. 5. The internal parts of the water tank are aging 6, there is a problem with the water inlet group or the water outlet group of the toilet 7, and the water tank of the flush toilet is leaking.

Second, how to repair the toilet leakage and search for water 1, if it is installed in a specialty store, it is usually padded with a sealing ring inside, and the toilet is put on the surrounding glass glue. Tools to prepare: utility knife, (if you need to disassemble the angle valve) water adhesive tape, wrench, glass glue and glass glue gun.

Toilet seals (need to be replaced if removed). 2. If it is a decoration of plumber and electrical tooling, it is usually made of white cement. Tools for quasi-family keying:

Slotted screwdriver (used to eliminate the original white cement), white cement (when reloading, first mix the water at the bottom of the toilet, then put the toilet seat up and put it steadily, and then use the mixed white cement to seal the toilet footsteps in a circle, and when it is dry, it can be used.) Be careful not to let the white cement fall into the pipe, otherwise it will cause the pipe to be blocked.

Leakage between the toilet and the floor.

If there is a leak at the connection between the toilet bowl and the floor, clean the glue around the floor drain hole and the water hole under the bottom of the toilet. Then in these two places, the teasing side is coated with glass and glass glue, and then the toilet is pressed tightly, and the excess glass glue is removed, and it can be used normally after 24 hours.

1. Look: First of all, open the toilet tank, let's see what level the water scoop inside the water tank is at when it is full of water. If the water inside is full and the tank is still flooding, then there must be a leak coming out. This is easier to handle.

2. We use water to pull the card position of the water scoop up and down, and the sensitivity of the water scoop is sold, if it is not smooth, or it is difficult to move, then the water scoop is faulty.

3. If the water scoop is faulty, you can remove the equipment of the water scoop and clean it, if you don't know how to disassemble it, just put dry water directly in the water tank and clean it with dish soap or laundry detergent.

4. Check the interface of the stainless steel hose outside the water tank and the position of the water tank to see if there is any water leakage. Sidelink teasing.

5. If there is no problem inside, then the only thing that may cause a problem is that the surface of the toilet is cracked.

The leakage of the toilet is caused by the lack of installation and gaps.

Solution: 1. Scrape off the glass sealant on the contact between the base of the toilet bowl and the ground.

2. Copy the toilet bowl to a certain angle and check whether the sealing ring on the sewage outlet of the toilet bowl is damaged and the sealing is not tight.

3. The new toilet discharge pollution sealing trap is used in the toilet drain outlet.

4. Re-apply glass glue to the part where the toilet is in contact with the ground.

Precautions: 1. Regularly clean the pipe of the toilet or punch the filter with water, and use a nylon brush with a long handle to clean it with soapy water when cleaning, at least once a week.

2. Be cautious when using, avoid sewage sediment blocking the return port, and try not to pour cement, lime, paint and other substances into the toilet bowl every day, so as to prevent the sediment from precipitating and agglomerating in the toilet bowl and clogging after a long time.

3. Prevent feces from blocking the air return hole, it is best not to throw paper pads and other things that are easy to clog in the toilet, if it is blocked, it should be sucked out immediately with a leather suction device, and the return air hole of the flush toilet should be checked daily to ensure that it will not be blocked.

4. Make sure that the air return hole is normal, if you find something blocked, check whether it can operate normally, and it is best to clean it up immediately if it is blocked.

5. There are a lot of bacteria in the toilet seat, so we should also pay special attention to the need to clean the toilet in time after use, in addition, the toilet is also easy to stick to feces and urine stains and other dirt, and if there is still residue after flushing, it is necessary to use the toilet brush to clean it in time, otherwise it will be easy to appear macula after a long time, resulting in the breeding of mold and bacteria.