How to remove rust from the flesh of the hand, how to remove the rust from the flesh of the hand

Gently scratch the skin with an iron needle, apply it with a plaster (such as a wet ointment), and remove the plaster immediately.

Specific operation: 1. Boil the iron needle in water and cool it.

2. Gently cut the skin with an iron needle, the depth is equivalent to the depth of rust, and the puncture area is slightly larger than that of rust.

3. Then apply it with a paste (such as a wet ointment) and press it lightly.

4. Remove the plaster (the rust is glued to the plaster). This method is suitable for piercing small substances into the skin (because it cannot be removed with a needle).

Description: 1. The small substances pierced into the skin must be taken out in time, otherwise it is easy to produce foreign body granulomas (refers to foreign bodies (surgical sutures, dust, talcum powder.

wood thorns, etc.). The lesion is centered on a foreign body and is surrounded by a large number of macrophages.

Foreign body giant cells, fibroblasts, and lymphocytes.

etc., forming nodular lesions).

2. When the small substances belong to pollutants, apply disinfectant after taking them out, and when the area is large and the quantity is large, go to the hospital or outpatient clinic to inject tetanus antitoxin within 24 hours.

Tetanus antitoxin is plasma obtained from tetanus toxoid immunized horses, via gastric enzymes.

Liquid antitoxin globulins made after digestion and purification.

preparations, for the prevention of tetanus and **tetanus).

How to deal with rust stuck in the meat].

1. First of all, clean the wound, look at the depth of the wound, if it is deep and the area is large, you must suture the wound, if the wound is shallow, you should also disinfect it with alcohol, if the weather is hot, the shallow wound can make it natural good, no need to use a band-aid, because the hot band-aid wrap will lead to slow wound healing.

2. If the wound is deep and indeed rusty, then it must be tetanus. Otherwise, the consequences will be unimaginable, and you will have to go to a regular hospital for injections. If not timely**, the consequences are very serious.

Also, be sure to do a skin test before tetanus to see if there are any allergies and adverse reactions.

3. Finally, it is necessary to pay attention to the wound, prevent secondary injury, let the wound break open again, and pay attention to protecting the wound.

Precautions] If the wound is too large and there is excessive bleeding, be sure to break it.

Hello dear. 1. If it is not scratched, it is good to wash it off with laundry detergent, 2. If the scratched hand is cut by the rusty iron with digging and rusting is relatively light, and there is no bleeding, and there is only superficial tissue damage, it can be repeatedly disinfected by vitality iodine or alcohol cotton balls to achieve a better effect of eliminating the poison, and at the same time, sterile gauze or disposable dressings are used to wrap it, and there is no need to inject tetanus. If the hand is deeply cut by rusty iron, and there is active bleeding and obvious pain locally, it is necessary to seek medical attention as soon as possible, and the wound can be thoroughly rinsed with hydrogen peroxide, active iodine, and normal saline, and the external application of Yunnan Baiyao powder and sterile gauze is continuously pressurized and bandaged to control the bleeding and dispersion.

If local bleeding is difficult to control, sutures can be used to stop bleeding, and patients need to be injected with tetanus antitoxin or tetanus immune globulin as soon as possible within 24 hours of injury to prevent tetanus infection.

You can use fresh and messy lemons, drop the juice squeezed out on the rust stains, rub them with your hands, and then wash them with soapy water.

Because rust is an oxide of iron, they react with acetic acid in vinegar, which reacts with acid to form iron salts and water. All the acids in life are effective in removing rust, and with friction, they will be cleaned up in no time.

Tools: acetic acid, solution, citric acid solution, vitamin C tablets hail.

Method: 1. Sprinkle 15% acetic acid solution (or 15% tartaric acid solution on the stain).

2. Or soak the rust-stained part in the solution for about a day, and then rinse it with water.

3. Soak the rusty area with 10% citric acid solution, then soak it in concentrated salt water, rub it the next day, and rinse the dry silver slag.

Use white vinegar, use lime and salt, use baking soda to make a paste, use potatoes and dishwashing detergent, use chemical rust removers.

1. Use white vinegar. Vinegar reacts chemically with rust on metal, breaking it down. Soak the metal in white vinegar for a few hours, then wipe off the rust layer.

If the item is too large to be immersed in the white vinegar, pour a layer of white vinegar on top and allow it to condense. It is also possible to soak a rag in vinegar and wipe the metal. 2. Try using lime and salt.

Sprinkle salt over the rusty area, cover it thoroughly, and pour the lime juice on top. Try to use as much lime juice as you can and let it sit for 2 to 3 hours before washing the mixture off. Use the crust of the lime to wipe off the mixture.

The lime peel should be sufficient to remove the rust layer and not further harm the metal. 3. Make a paste with baking soda. Mix the baking soda and water together until the mixture is thick enough to apply to the metal.

Give it some time to condense before scrubbing it off.