The floor drain in my bathroom is a bit high, what should I do!

Treatment method: 1. First test the water to see, how much is the difference, the area of the high place is not large, after the high place is delineated (the general error will not be too big), the floor tiles of the high range are chiseled off, and the floor tiles are re-paved, and the color difference between the re-paved floor tiles and the original floor tiles is not too large, otherwise it is too obvious.

2. The floor drain is generally low, especially the second-hand paving has been renovated, but if the floor drain is high, you can use an angle grinder to cut off the upper part of the floor drain, cut it evenly, and modify the grate.

3. The floor of the bathroom has a slope, so the slope of the floor tiles should be gentle, and the floor tiles generally do not choose large blocks. What are the cubs?

In your case, it is best to find a master to knock off the bricks on the side of the floor drain and re-pave.

It is estimated that the slope was not done well. The floor drain is not the lowest point of the bathroom. Simple ways are not easy to deal with. To re-lay the floor tiles.

The most trouble-free way is to add cement mortar to the existing ground to find the slope and then cover the floor tiles.

Hehe. This one is a bit of a hassle. I didn't do a good job of solving it, so I knocked it out and redid it.

When the mason is tiled, there should be a slope, which is high and low, and the water is good and the floor drain is placed. Do you guess this is due to the renovation carried out by the guerrillas or the unprofessionalism of the construction team, or is it not careful? Generally a professional renovation company.

There will be no such low-level mistakes.

Is it the floor drain that is not suitable or the terrain is not suitable??

If the floor drain in the bathroom is too high, it can lead to poor drainage, causing poor water flow or even entering the room. This situation can be solved by the following stove almanac method:

1.Replace the floor drain with a lower one.

If the floor drain in the bathroom is too high, you can consider replacing it with a lower one. It is advisable to choose the same model as the original drain and avoid re-laying the drainage system, which will not only save time but also money.

2.Readjust the drain pipes.

If replacing the floor drain is too difficult or feasible, consider readjusting the height of the drain to match the floor drain. This needs to be handled by professional workers to avoid causing other damage.

3.Increase the diameter of the drain pipe.

4.Install auxiliary drainage.

If the above methods are not feasible, you can consider installing auxiliary drainage equipment, such as blowers, drainage pumps, etc. These devices can speed up wastewater drainage and improve drainage efficiency.

To sum up, if the floor drain in the bathroom is too high, it is necessary to take measures to deal with it in time. Choosing the corresponding solution according to the specific situation can effectively avoid the problem of poor drainage and other damage.

If the floor drain in the bathroom is high, it may cause water to fail to flow out, or even cause water leakage problems. So what to do?

1.Replace the floor drain.

If the height around the floor drain is not suitable, you can consider replacing it with a suitable floor drain. Choosing the right floor drain can ensure that the water flows out normally, and at the same time, it can also avoid the problem of water leakage. Before replacing the floor drain, you need to remove and clean the old floor drain, and then install it according to the installation instructions.

2.Adjust the ground height.

If the height of the floor drain is relatively low, you can increase the floor height by adding a layer of bricks or wooden planks around the bathroom floor. This can effectively solve the problem of non-compliance with the height of the floor drain perimeter. However, when adjusting, it is necessary to pay attention to the height of the ground should not exceed the height of the threshold, otherwise it will affect the use of the bathroom.

3.Floor drain gaskets.

If the height of the floor drain perimeter is not suitable, you can also consider using floor drain gaskets. Floor drain gasket is an auxiliary material that can be adjusted freely, which can solve the height problem of floor drain on the ground at different heights. The use of the floor drain gasket is also very simple, you only need to install it on the floor drain.

4.Floor drain raiser.

If it is not convenient to change the floor drain or adjust the floor height, you can also use the floor drain raiser. The floor drain lifter can raise the floor drain to a certain height, and slow down the operation to solve the problem of inappropriate height around the floor drain. However, when using a floor drain lifter, it is necessary to pay attention to the height of the raised threshold.

In short, when dealing with the height of the floor drain in the bathroom, appropriate measures should be taken according to the actual situation. If you are unsure about what to do, you can consult a professional.

The simple way to deal with the height of the floor drain in the bathroom <> is to first look at the area and height of the high, and then delineate the high place, carefully knock off a few pieces of floor tiles around the high place, make a small slope, do not damage the base layer, and then slightly apply a layer of cement glaze slurry. If it is only a little higher, you can use an angle grinder to cut off the upper part of the floor drain a little, cut it evenly, and modify the grate. If you re-lay the floor tiles, you must first level the ground and do a little slope, the slope of the ground to the floor drain is usually 2%-3%, the ground leveling should be centered on the floor drain, radiate to the surroundings, and maintain a certain slope, in order not to accumulate water as the standard.

And before paving, be sure to do the last waterproofing again.

As we all know, floor drain is an indispensable construction link in home decoration. So the question is, how to remedy the high floor drain in the bathroom? Let's take a look.

The easiest way is to add cement mortar to the original ground, and after finding the slope, then pave the floor tiles. Or the tiles around the floor drain are knocked out and reinstalled, but in the process of laying floor tiles, it is best to use a cutter to groove the joint of the tiles, so as not to damage the other floor tiles.

Key points for choosing the installation location of the floor drain in the bathroom.

1. Stay away from the bathroom door.

The floor drain has three major advantages, which are drainage, odor prevention and insect prevention. If we install the floor drain at the door, and the floor drain has a problem in one of the links during use, then the room will suffer. For this reason, the floor drain should be installed away from the gate.

2. Choose a place that is open and easy to clean.

Secondly, in the process of designing and decorating the bathroom, some owners feel that the floor drain is not good-looking, which will directly affect the aesthetics of the bathroom, so that the floor drain is installed in a very hidden corner, such as the back of the toilet. The floor drain installed in this way ensures aesthetics, but when it comes time to clean it, the owner will be confused.

For this reason, it is recommended that floor drains should be installed in a relatively open area and easy to clean.

3. Do not install it in the middle of the bathroom and floor tiles.

In the process of installing the floor drain, some construction personnel will choose the location of the floor drain in the bathroom for convenience, so that the effect of installation will not only affect the beauty of the bathroom, but also is not conducive to drainage. For this reason, the process of installing floor drains should be observed: the bathroom brick should have 1 inclination, the door brick should be high, and the inside brick should be low.

If the floor drain is installed in the bathroom**, then the floor drain cannot be lower than the ground, which leads to stagnant water that is not easy to drain. In addition, the floor drain is installed on the floor tile** is the same, which is also not conducive to bathroom drainage.

Summary: After reading the above introduction, I believe you have a further understanding of how to remedy the high floor drain in the bathroom. If you need to know more about it, please continue to ******, and more exciting content will be presented to you in the future.

The floor of the bathroom floor drain is high, which may be caused by the installation not in accordance with the specified height or the design problem of the house itself. Although this situation does not affect daily use, it will bring some troubles, such as affecting the overall aesthetics of the bathroom, and at the same time, it will also make the bathroom have certain health hazards. If you want to solve this problem, you can consider the following solutions:

1. Reinstall the floor drain. If there is a problem with the height of the floor drain and it is quite different from the standard height, you can consider reinstalling the floor drain and adjusting its height.

2. Increase the height of the floor. A floor drain plate is set at the floor drain, and the letter rock is paved with floor tiles again, which can increase the height of the ground, so as to achieve the effect of talc with the standard height.

3. Change the design layout. If there is a problem with the design of the house itself, consider re-arranging the bathroom and changing the location of the floor drain to achieve the standard height.

In summary, the problem of high floor height at the floor drain in the bathroom can be solved by reinstalling the floor drain, increasing the floor height, or changing the design layout. Before any changes are made, a detailed review and evaluation of the restroom and consultation with a professional renovation company are required to ensure that the changes are as expected and will not affect the structure and safety of the restroom.

The height of the floor drain in the bathroom refers to the height of the floor drain panel from the ground, if the height is not suitable, it will affect the drainage effect and water quality. For example, if the floor drain height is too high, the sewage cannot be discharged in time, which will breed bacteria and odors, which is not conducive to hygiene.

To deal with a high floor drain in the restroom, you can take the following measures:

1.Refurbishment of floor drains: If the height of the old floor drain is not suitable, a new one needs to be replaced. When buying a new floor drain, pay attention to choosing a floor drain with the right height, and also make sure that it is installed correctly when installing it in order to obtain a good drainage effect.

2.Adjust the drain pipe: If the floor drain height cannot be adjusted, you can also try adjusting the position of the drain pipe.

Sometimes, if the height of the drain pipe is too low, it will also cause the floor drain height to be inappropriate, and there are some ways to adjust the height of the drain pipe, such as moving the position of the sink or toilet.

3.Install drain outlets: If the floor drain height cannot be adjusted and the location of the drain pipe cannot be moved, consider installing a drain in the restroom to direct the flow of water to the drain outlet.

4.Use a retrofit card: If the height of the floor drain is far from the height of the water pipe, you can use the method of the renovation card to connect the floor drain and the water pipe together in order to achieve a good drainage effect.

In short, the inappropriate height of the floor drain in the bathroom will affect the drainage effect and hygiene, and appropriate measures need to be taken in time to adjust. Before taking any action, you need to identify the root cause and find solutions to make your restrooms healthier and more comfortable.