Unsafe behaviour at work and how can I avoid it in the future?

Since it is engaged in a certain kind of work, then the job must have corresponding job responsibilities or rules and regulations.

As long as you can follow the relevant regulations, you can avoid accidents under normal circumstances, and you can also summarize some key points suitable for your work according to the actual situation, and pay more attention to them, basically you can keep safe.

Always pay attention to the surrounding environment and check whether the working environment is safe before working every day.

High-speed information age.

Work and life provide great convenience, and with it, there are many safety hazards around you.

We need to pay attention to ourselves.

Establishing a sense of self-safety is not imposed on us by our parents in our work life, but we are aware of the importance of safety.

In the face of accidents in life and work, highlight early warning and prevention, and plan first.

At work, only by understanding the relevant safety laws can we know how to effectively prevent and deal with them reasonably, and there are some common sense about life safety and life safety signs.

We must know how to distinguish and be vigilant.

After mastering the knowledge, we need to practice in order to really encounter safety accidents, so as to achieve reasonable and effective use, and avoid that in actual life or work, if safety accidents occur, the accidents can also be stopped in a timely and effective manner or the losses can be minimized.

We establish safety awareness, master the necessary knowledge, and also do practical safety drills, we can teach the safety knowledge and practical operation to the partners in the work around us, the family in life, and at the same time strengthen our understanding of safety knowledge and improve our practical operation ability.

We should be familiar with the operating procedures in the factory, especially to handle with care, not in a hurry, to avoid unnecessary situations.

It would be better to put up that kind of safety notice on the construction site, and then pay a fine for ignoring the safety behavior.

People's unsafe behavior, first of all, is human behavior, such as not wearing protective equipment, not operating according to regulations, and so on.

The unsafe state of things, first of all, is the state of things, such as defective work tools, faulty operation of equipment, etc.

Unsafe factors in the environment, such as insufficient illumination, cramped work sites, and bad weather.

Wait. Management deficiencies, such as no system, no measures, etc.

1. To enhance the safety awareness of employees, the unit should conduct safety education for employees through various forms of meetings, so that life education and safety awareness can enter the minds of each person, consciously respect the rights to life of themselves and others, and enhance the awareness of consciously paying attention to safety.

2. Training safety skills, for fire extinguishing, drowning prevention, lightning protection, first aid and other safety skills to be trained, for all teachers and staff, students and parents to carry out, training skills include fire prevention, drowning prevention, earthquake prevention, lightning protection and other emergency avoidance knowledge skills and cardiopulmonary resuscitation and other first aid knowledge.

3. Establish a safety inspection mechanism. According to Murphy's Law, no accident comes out of nowhere, nor does it come out of nowhere. There are always some precursors of accidents, so it is necessary to check frequently, find the spearhead, and be sure to stop it in the bud in time, and not take it lightly.

Legal basis: Work Safety Law of the People's Republic of China

Article 45.

Employees of production and business operation units have the right to understand the risk factors, preventive measures and accident emergency measures existing in their workplaces and workplaces, and have the right to make suggestions on the safety production work of their units. ”

Article 50: "Employees shall receive education and training on production safety, master the knowledge of production safety required for their own work, improve their production safety skills, and enhance their ability to prevent accidents and deal with emergencies. “

Article 51.

Employees who discover potential accidents or other unsafe factors shall immediately report to the on-site safety production management personnel or the person in charge of the unit; Personnel who receive the report shall promptly handle it. ”

As a safety officer, our main purpose is to protect the safety of every employee, in the process of safety inspection, if an employee is found to have unsafe behavior, we must remind the employee in time. At this time, we are not afraid of making other employees unhappy, because we are protecting their lives. If you feel that there will be some bad effects, you can also choose to tell them in a slightly more soothing language that this is not the right approach.

In the process of operation, some employees may choose to take some shortcuts because they want to make it more convenient, or because they want to complete their work faster, but this is also likely to cause themselves to be affected to a certain extent. And especially in some factories, you need to use some electrical appliances, at this time if the operation is not standardized, it is very likely to lose your own life. Safety officers can choose to tell employees what they are not reasonable about, and they can also choose to teach employees how to do their jobs correctly.

If there is any negligence in the process of operation, it is likely to lead to the loss of life. I learned on the Internet that when some female comrades entered the workshop, because they did not wear hats correctly, their hair was caught in the machine, and they died instantly, which is also a very terrible phenomenon. The company's leaders can also choose to make posters of some accidents and paste them next to the machine, which can also attract the attention of employees.

There are many employees who always choose to risk themselves when they are working, and feel that it doesn't matter, but I want to tell everyone that if they are not careful, they are likely to bring great harm to themselves. We should use some ways to protect ourselves, and if we encounter any problems, we must tell the safety officer in time, only in this way can we reduce the occurrence of some accidents.

If an employee is found to have unsafe behavior, he must stop it in time, he must be allowed to correct it quickly, and he must be severely criticized, and he must let him know that this behavior will bring great harm.

The unsafe behavior of employees should be corrected in a timely manner, because it is your responsibility and you are responsible for the employees.

I think that if we find such a problem, we can first criticize the symptomatic employee accordingly and then order him to correct it.

Summary. Eight common unsafe behaviors of employees 1, operation errors, neglect of safety, ignoring prohibitions: starting, shutting down, moving the machine without permission, not giving a signal when opening and closing the machine, the switch is not locked and causing accidental rotation, power-on or leakage, etc., forgetting to turn off the equipment, ignoring warning marks and warning signals, operating errors, running operations, over-speeding of the machine, reaching into the stamping die, the workpiece is not fastened firmly, and blowing iron filings with compressed air.

2. Cause the failure of the safety device: the safety device is dismantled, blocked, and the function fails, and the equipment without the safety device is used. 3. Use unsafe equipment

Temporary use of insecure facilities, use of equipment without safety devices. 4. Hand instead of tool operation: use hand instead of hand tool, remove chips by hand, do not use fixture fixation, use hand to hold the workpiece for machine processing, and improper storage of items.

5. Venture into dangerous places: close to the leakage place, dangerous goods room, power distribution room, etc.

Eight common unsafe behaviors of employees 1, operation errors, neglect of safety, ignoring prohibitions: starting, shutting down, moving the machine without permission, not giving a signal when opening and closing the machine, the switch is not locked and causing accidental rotation, power-on or leakage, etc., forgetting to turn off the equipment, ignoring warning marks and warning signals, operating errors, running operations, over-speeding of the machine, reaching into the stamping die, the workpiece is not fastened firmly, and blowing iron filings with compressed air. 2. Cause the safety device to fail

The safety equipment is dismantled, the rubber is blocked, the function is ineffective, and the equipment without safety devices is used. 3. Use of unsafe equipment: temporarily use unstable facilities and use equipment without safety devices.

4. Hand instead of tool operation: use hand instead of hand tool, remove chips by hand, do not use fixture fixation, use hand to hold the workpiece for machine processing, and improper storage of items. 5. Venture into dangerous places as the first thing to return

Close to spillage, dangerous goods room, power distribution room, etc.

6. Climbing and sitting in unsafe positions: working and staying under the lifting bushes, refueling, repairing, adjusting, welding, clearing seepage and sweeping traces when the machine is running, etc., with distracting behaviors. 7. Not wearing labor protection equipment:

Ignoring the role of PPE in workplaces where it is necessary to use it.

Since it is engaged in some kind of work, then the job will have corresponding job responsibilities or rules and regulations, as long as you can comply with the relevant regulations to avoid accidents under normal circumstances, in addition, you can also summarize some points suitable for your work according to the actual situation, usually pay more attention, basically you can keep safe.

For customers, in terms of property, supervision is not effective, and it is easy to steal by guard. As far as oneself is concerned, it is easy to have conflicts with others in terms of personal safety.

A verbal altercation can turn into a fight, with the possibility of injury and death.

In addition, positions that prevent others from making money, such as bodyguards or bank security guards, are examples. In daily work, only by continuously improving their communication skills and image and improving their service levels will there be benign development.