-
The files on the hard drive will not be destroyed by changing computers. A hard disk is a data storage device using magnetic media, which is composed of one or more discs made of aluminum or glass. The disc is covered with a ferromagnetic material.
When files are written to the hard drive, they are recorded on the hard disk of the hard drive, and the data is stored on several disk slices sealed in a clean hard drive cavity. Even if the power is cut off, or taken out of the computer, as long as the hard drive is not considered damaged, the files inside will not be damaged.
-
The data is still there.
The hard disk is an external storage device, and there is no loss of data if the power loss (corresponding memory) is lost. Therefore, the data in the hard disk is saved, and the data still exists after the computer is dismantled after the power is off, and the data in the hard disk can be accessed after being hooked to another computer.
-
The data will not be lost, it is still there.
Include all the data, of course you will be able to process it.
If the original hardware boots, reinstalling the original computer will definitely boot. The files are also present after startup.
You can also find a hard disk enclosure, insert this hard disk, use it as a portable hard disk, and attach it to another computer to find the data. This one is also very simple.
Hope it helps you and please thank you in time.
-
Hello friends. Data on the hard drive. As long as you don't remove it. He's not going to go away.
-
No problem, you can access the data on the hard drive once you plug it into another computer.
-
There is no problem in removing the hard drive, and if it is not bumped, the contents will be retained. But if you remove the hard disk, the computer will not turn on, so how can others check the computer for you, unless it is not a system or software problem.
What should I do if my computer's hard drive is broken? For mobile hard disks, I believe that everyone often uses them, and it is also a relatively common storage device, but many people often accidentally format or delete it by mistake when operating the hard disk, resulting in the loss of data. So for these lost data files, can they still be recovered?
Hard Drive Data Recovery Method!
In fact, for files formatted on the hard disk, it is generally possible to recover, because when the computer deletes the file, it generally marks the deleted file as "free", and does not really delete it, but uses another form to store the file. So how do we recover files formatted in this case? How can I get my lost files back?
Step 2: Select "Where the original data file is stored", here you can directly select the disk where the corresponding data was deleted by mistake, and click the "Start Scan" recovery option below to automatically scan.
Step 3: After the scan is over, you can select the files we need to recover according to the file path or file type, and click the "Recover" option below to retrieve the lost files.
-
Yes. The hard disk is the storage of the computer, and all the information is stored in the hard disk.
The feature of the hard disk is that it does not lose information when the power is down.
-
Are you going to repair a mainframe or a hard drive? If you repair the hard disk, the data will be gone after the repair, if you remove the hard disk and put it at home, take the host to repair, the data will be saved, the machine is back, the hard disk is installed, and continue to use!
-
Rest assured, you are repairing the host and not a hard disk, and the hard disk data will not be lost.
-
The desktop is a shortcut.,Default C drive.,There will be no one.。
-
It's still there, as long as you come back and don't change the system.
-
Yes, it's okay if it's not formatted.
-
It's hard to say. Let's see how to fix it.
-
Summary. As long as the hard drive is not formatted. You tear it down and put it for a year. The data is still there.
If I remove the hard drive from my computer, will the data still be there? Can the data in the old hard drive be recovered?
As long as the hard drive is not formatted. You tear it down and put it for a year. The data is still there.
Can it be used as a portable hard drive recovery.
If the contents of the old hard disk are deleted, can it be recovered as a portable hard disk on the computer?
Hello, you can try, the general content formatting is gone.
-
If the hard drive is not severely damaged, the data inside will definitely be there after removal.
If there is a problem with the system before it is removed, then if the system is rebuilt, that is, only the C disk will be gone. However, it is recommended to hang the hard disk on another computer before redoing the system, and copy all the data in the hard disk.
Reinstall the system to turn on, and the data will not be lost. It also does not need to be configured.
-
In fact, the hard disk is equivalent to a USB flash drive, and if you are poor, it is equivalent to a USB flash drive unplugged, and you can see the contents of the USB flash drive when you connect the cable.
-
The data is still there (the system is installed in the hard disk), and the reinstallation is generally like one-click installation is to erase the data of the C drive or install it manually (but most of the files such as the D drive will be retained).
-
That's right, all the files are still there, including your ** station, but, the premise is that this hard disk has not been subjected to external collisions, if it has been bumped, there may be fewer files, and it is generally not obvious that sometimes there will be no lack of things, but if it is too serious, it will definitely be no fun, and it will lead to unusability (that is, it will be completely damaged, and the files will definitely be gone), and the solid state drive is slightly better in the face of collision, and the mechanical one will be useless.
It's better not to disassemble the hard drive, it's okay to accidentally drop it. If you don't use it often, you can buy a portable hard drive to sit on, which is similar to a portable hard drive.
No configuration is required.
-
As long as the material is there until you tear it down. Put it on the new computer, and the data will definitely be there! (unless it's broken), the system is better off doing it all over again.
-
I didn't say anything about the information, but now it's a matter of putting two disks together.
1. If there are two hard disk interfaces on the computer motherboard, it is convenient to insert the two disks separately.
2. If it is connected on the same interface, you need to understand the system that has your local computer on the disk, some are the main disk (the jumper interface is the master), and the other disk is the slave disk, just take off the small hat of the jumper.
In this way, it can start smoothly after booting, and both disks are available.
-
All the data is in.
However, if you don't redo the system, it is likely that the system will not boot up due to hardware differences, so it is best to copy the data of the C drive before changing the hard disk, and then reinstall the system on the new computer.
That is to say, in addition to the C disk, there will be no loss of other dataIn addition, if the new computer has two IDE hard disks (wide data cables), the old hard disk must be picked up into a slave disk, otherwise it will not start.
-
In addition to the data of the C drive, the other information is there, because your system needs to be redone, because the hardware has been changed, so the old hard disk must be used from the system!
-
In,The system doesn't have to be redone.,Just install the driver of the new machine and you can pull.。。。
-
yes, yes! The data is there, and the system doesn't have to do it from! It's as simple as taking your watch off. Just put it on when you need it.
-
Halo: It's definitely there
If you have another machine, in principle, you just need to install a driver
-
In the system to be redone.
-
In
There's no formatting inside the stuff that's there
-
The jumper is represented by the name of the E text.,S and M represent the master and slave respectively (even don't remember that it's the master and slave.,Anyway, try it.,Reverse it.。。 )
The jumper is behind the hard disk, there are not many needles, and there are 4 rows of two in each row!
If it is a SATA hard disk, you don't need to set it up, you can directly insert SATA 1 into the main disk, and so on.
-
After the hard disk is removed, there are 4 ports in the back, and there are jumper hats.
Then there will generally be a pattern next to it, teaching you which way to jump is the master and which is from.
Then change the position of the jumper cap according to the pattern.
-
The data is still there, and the system is not open.
-
They are all pulling themselves up and looking.
-
In, in, in, in. Absolutely.
-
Then you still don't sell it, whether the data of the hard disk is stored in the diskette, and the power is off or it is permanently saved. If you really want to sell it, format your disk on the computer at a low level, so that unless it is a data recovery center, the average person cannot recover it.
-
1: The interface is backward compatible, so the old hard disk can be used, however, the data transfer speed will be reduced to SATA2 (the specific parameters of the interface can be queried online). 2:
The first partition of the first hard disk is C:, the first partition of the second hard disk is D: by default, and the rest of the partitions of the two hard disks are automatically allocated in alphabetical order.
Of course, the assignment of the drive letter can be changed artificially) 4: The data in the old hard disk will not change, what partition is the original one, after the hard disk is attached, it is still in the original partition, but the drive letter of the partition has changed. Finally, the applications and games installed on the original hard drive may need to be reinstalled under the new system before they can be used.
It is recommended that you hook the old hard disk to the new computer, copy the game installation files from the old hard disk to the new hard disk, and reinstall it. The old hard drive was removed for the reason 1:
The hard disk of the new computer must be much larger than the capacity of the old hard disk, not worse than the 100g. 2: The speed of the new hard drive is more convenient than the old hard drive block, which is more convenient to play.
3: Hanging multiple hard disks at the same time will increase the power loss of the power supply, which is not necessary. (The power consumption of a typical desktop hard drive is about 25-30 watts) 4:
When buying a new computer, it is best to take the old hard drive with you, or you know the computer yourself and have the ability to install the hard disk by hand.
-
Won't go away. But it doesn't necessarily turn on.。。 If the motherboard is the same, it can be turned on.
-
As long as it is not degaussed, the data will not be lost, and as long as the corresponding software is installed, it can be used directly.
-
If the two motherboards are different, you have to reinstall the drivers and the files are still there.
-
It's still there. If the drive doesn't burn out, then everything on the drive is fine, and that's not to worry. But if the hard drive is also burned out, it's a bit of a hassle. In general, no problem.
How to remove the hard drive:
In the case of disconnecting the power supply, disassemble the iron plate on both sides of the chassis, in the column of optical drive, in addition to the optical drive, the largest one is the hard disk, followed by a power cable, a data cable, unplug it, unscrew the upper and lower four screws, you can remove the hard disk.
-
Things are there, you can buy a data cable directly, you can plug it in directly, read it from the hard disk If you are looking for a desktop turn, how to take it off and how to install it back, connect what you want to a USB flash drive, copy it out, and then take out the hard disk and exchange it back to someone else's.
-
You have to see what interface the data cable of the old hard disk is, and you can copy it out by hanging it on the new computer.
-
Take off the hard drive and replace it with another computer. There is no need to design the hard disk as the first initiator. I can open it, too.
-
For the sake of convenience, let's start with the following description: A is the computer hard disk that you removed from your school, and B is the computer hard disk that you have at home.
1. The hard disk is the data storage device of the computer, and removing the hard disk does not affect the preservation of data.
2. After you take it home, there are usually 2 to 4 structures on other computers, so you only need to connect it through a data cable.
3. If you only read the data in it, you don't need to make other settings, and the operating system of hard disk B can automatically identify hard disk A and read the data in hard disk A after entering the system interface.
4. If A is used as a boot disk, you should first consider whether the hardware configuration of machine B is consistent with the hardware of the machine where hard disk A is originally located, otherwise it will cause a blue screen or driver error. In this case, consider reinstalling the operating system.
Welcome to ask, remember to give points, (*.)
-
In the stuff as long as it's not formatted.
-
Since it is removed from the computer, only the IDE interface and SATA interface, the power cable and the transmission cable are connected to the power supply and the motherboard, and then the jumper of the hard disk will show 2 hard disks in my computer, and the hard disk boot set by the BIOS has nothing to do with it.
The hard disk taken by the school should be set up with a jumper, there are jumper caps and pins behind the hard disk, and it is enough to set it to a slave disk, and the jumper caps should be inserted into the first and second pins in the first row, and the number from left to right should be counted.
-
...Others have already made it clear to you, if you still don't understand, it's really hard to get it, find someone who understands it for you.
There is no problem at all with just the hard drive.
Use a small word change cone to pry the small gap on the side of the panel, and open it with a prie. >>>More
How to remove the screen of your computer monitor Steps:
1.Place the monitor in reverse on the table and remove the base screws. >>>More
To remove the graphics card from your computer, the steps are as follows: >>>More
Method: 1. The headlamp is relatively complicated, there are a total of three lamps in the front, and a knife or screwdriver is used along the front part of the U-shape. >>>More
Tools: screwdrivers, wrenches and pliers. Here's how. >>>More