How to remove the kitchen faucet and replace it with a new one

Tools: screwdrivers, wrenches and pliers. Here's how.

1.Remove the small screws on or behind the faucet handle, and then remove the handle that is fixed to the faucet body. A small number of faucet screws will be under the plastic buttons, metal buttons or plastic sheets, and as soon as the buttons are opened, you will see the handle screws mounted on the top.

For faucets that have been used for a long time or have not been used for a long time, its screws may become very tight due to rust and other reasons, if this happens, you can choose to drip some lubricating oil into it.

2.If the screw is hidden in the hole, it is recommended to use a flashlight to observe, which is mainly to see if the fixing screw inside is a cross or a slot, and then use the corresponding screwdriver to loosen. The screw of a few brands of faucets is an inner square hole, which is more troublesome to disassemble, and special attention should be paid not to damage the screw mouth when using alternative tools.

When the screw is released, the handle can be removed.

3.At this point, you will see a large copper nut, first remove the nut with a large movable wrench, and then you can remove the spool of the faucet. Observe whether the copper plane under the spool is uneven and free of fine sand particles, and remove it cleanly.

Prepare the tools you need, such as pliers, wrenches and screwdrivers, and if you only need to replace the faucet parts, then you need to prepare the parts that need to be replaced, and turn off the main valve.

If the screws of the faucet are attached under a plastic sheet, plastic button, or metal button, the handle screws mounted on the top of the faucet can be removed by simply opening the button.

In the process of replacement, some water inlet hoses have been used for a long time, and there will be rust or catalytic fasteners, so that the water inlet hose can not be unscrewed, in this case, you can drip oil on the rusty place, and then take out the basin faucet.

How to dismantle the kitchen faucet, the in-wall kitchen faucet, simple and easy to understand.

Answer method: Use a blade to cut the glass glue around the basin, and the basin can be taken down, If you want to change the valve core, you can replace the valve core if you can find the same valve core, Disassembly method: 1. Take off a sign indicating the hot and cold water behind the faucet handle, 2. Use a screwdriver to loosen the screws inside from this small hole and remove the handle, 3. Unscrew the decorative cover, and use a movable wrench to unscrew the valve core fixing screw, and you can remove the valve core I hope my answer will help you!

Twist the two hoses counterclockwise from the angle valve, take out the whole faucet, and then grasp one hose and twist it counterclockwise from the bottom of the faucet.

Find a plumber, I can't explain it...

It's so easy, I make this every day, there are screws and nuts under the sink, and you can unscrew it when you turn to the left, or you can turn it to the right on the top. If you have more questions, you can click on ID to consult.

Kitchen faucet disassembly** is as follows:Tools Ingredients: kitchen faucet, wrench, white tape.

1. First of all, use a wrench to remove the pipe of the water outlet, and remove the pipe connected to the reservoir together.

2. Take out the faucet that needs to be replaced and put the new faucet on the cistern.

3. Connect the pipe with the reservoir and mix white tape into the pipe at the upper water outlet to prevent water leakage.

4. Connect the pipe of the water outlet, and the faucet can be replaced.

Kitchen faucet disassembly** as follows: Tremble1. First of all, close the water inlet valve, which is generally located under the kitchen countertop.

2. Adjust the size of the wrench to adapt to the head of the faucet, and use the wrench to twist the head of the faucet.

3. Separate the water inlet pipe and the hose, first use a wrench to separate the water inlet pipe and the hose, rent and disassemble, be especially careful, hold the water pipe with your left hand, twist the wrench with your right hand, and easily separate the two.

4. Separate the faucet and basin and remove the fixings of the faucet, so that the faucet can be removed from the basin.

5. Use a saw to cut the interface, remove the basin from the countertop, and after the basin is removed, then use the saw to cut off the rusty part that is difficult to remove, and the faucet will be successfully disassembled.

How to remove the kitchen faucet and replace it with a new one The kitchen faucet is broken, and it generally needs to be replaced, but if it is a finished product purchased outside, it can be installed directly, if it is purchased by yourself, it will be more troublesome, and the following will introduce to you that the kitchen faucet is broken, how to replace it.

Tool material: screwdriver, wrench, etc

1. First of all, remove the old faucet that has broken down, and then, under its jujube, there is a screw hole, unscrew it with a wrench, so that the old faucet can be taken down. Then, we put the new faucet head on, pay attention, we must follow the order, first unscrew the bolt, then install the new faucet, then unscrew the bolt, and finally, install the new faucet, and that's it.

2. In addition, if you want to replace the old one with a new one, you can also do this, but be careful not to mix it up. First of all, we need to remove the old one, and then, with a screwdriver, remove a set screw on top of it. Then, with a wrench, we remove one of the fixing screws on top of it.

3. Next, we put the new one on, pay attention, we must come in order, first tighten the fixed screws, then tighten the fixed screws, and then install the fixed bolts, and finally, replace the old ones, and that's it.

To remove the kitchen faucet, you can follow these steps:

Turn off the water source: Before disassembling the faucet, close the water source valve to prevent the water from continuing to flow out.

Remove the connecting pipes: Use a wrench or wrench to turn counterclockwise to loosen the inlet and outlet pipes connecting the faucet. Note that you may need to use two wrenches, one to hold the faucet in place and the other to rotate to loosen the connecting pipe.

Disassembling the faucet body: The faucet is usually bolted or screwed to the sink. Using a wrench or screwdriver, unscrew the bolts or screws securing the faucet and remove the faucet from the slamming sink.