How to remove the computer graphics card, how to remove the graphics card

To remove the graphics card from your computer, the steps are as follows:

1. If there is a condition, you can wear anti-static gloves, and if there is no condition, wash your hands first to prevent damage caused by static electricity;

2. Unplug the monitor cable, disassemble the chassis, and unscrew the graphics card and the fixing screws on the chassis;

3. If it is connected to the auxiliary power supply cable, unplug the power supply cable and the power plug of the motherboard to avoid insufficient space for the graphics card;

4. Check the type of card slot, mainly to see the type of button, if the motherboard has two card slots, look at the other one that does not insert the graphics card, the main thing is whether the button is pulled out or pressed inside or slid left and right, the button is not opened and the graphics card cannot be pulled up, the current card slot is more convenient, it is pressed, and it will bounce up when you press it down;

5. After the graphics card is removed, it is recommended to clean up the dust of the chassis or motherboard by the way.

a.Remove the independent power plug that the graphics card is connected to.

b.Press down on the latch at the end of the slot.

c.Remove the graphics card vertically upwards.

First remove the graphics card, and then there is a plastic post between the fan on the graphics card and the graphics card with a kind of fixed buckle with springs on it. You press the button inside with your hand, and then pull the fan to separate it from the graphics card.

There is also a white glue-like thing between the fan and the graphics card, don't worry about destroying it, he just fixes the fan and doesn't let it shake and gets it.

The desktop can be disassembled, and you can't get the laptop yourself, so ask a technician to help.

Why do I keep seeing you asking questions =.=

Summary. Hello, I'm glad to answer for you, the steps to remove the graphics card are as follows: 1. Unplug the computer after shutting it down, and then lay the computer's chassis flat on a stable ground.

2. Remove the screws on the back of the case, and then push out the cover next to the computer. 3. Use a screwdriver to remove the screws and power supply of the graphics card. 4. Press the buckles at both ends of the graphics card, and slowly take out the computer graphics card after a little force.

Hello, I'm glad to answer for you, the steps to remove the graphics card are as follows: 1. Unplug the computer after shutting it down, and then lay the computer's chassis flat on a stable shirt. 2. Remove the screws on the back of the case, and then push out the cover next to the computer.

3. Use a screwdriver to take or accompany the screws and power supply fixed by the graphics card. 4. Press the buckles at both ends of the graphics card, and slowly take out the computer graphics card after a little force.

Extension: Graphics card (English: video card, display card, graphics card, video adapter), is one of the most basic components of personal computers, the purpose is to convert the display information required by the computer system to drive the display, and provide progressive or interlaced scan signals to the display, control the correct display of the display, is an important component to connect the monitor and the motherboard of the personal computer, is the "man-machine" One of the important devices of the Jislip School, its built-in parallel computing capabilities are also used for deep learning and other operations at this stage.

Graphics card, also known as video card, is an important part of the computer, responsible for the task of outputting display graphics, for people who like to play games and engage in professional graphic design, graphics cards are very important. The graphics chips of mainstream graphics cards are mainly manufactured by NVIDIA (NVIDIA) and AMD (Supermicro Semiconductor), and the graphics cards with NVIDIA graphics chips are usually called N cards, and the graphics cards with AMD graphics chips are called A cards.

a.Remove the independent power plug that the graphics card is connected to.

b.Press down on the latch at the end of the slot.

c.Remove the graphics card vertically upwards.

Open the case, you can see a graphics card, remove the screws that fix the graphics card, and then pull it out hard.

The steps to remove the graphics card of the computer are as follows:

1. First of all, prepare the screwdriver, before the box is opened, our hands should first look for the surrounding metal objects, and touch them. The discharger should release static electricity to avoid damage to electronic components due to electrostatic shock. Remove the screws with a screwdriver, and remove the cover.

2. Then, use a screwdriver to remove the screws and bezel that lock the expansion card.

3. Next, hold one side with both hands, balance vigorously, and slowly take out the computer graphics card.

4. Finally, after success, you can take out the graphics card in the computer host.

The specific steps to remove the computer graphics card are as follows:

1.First of all, you must know whether your graphics card is a single display or a set display, if you don't know, you can judge which interface the graphics card is connected to the data cable, if it is connected to the set display (vertical), then it is a set display, if it is connected to the independent display stop (horizontal), then it is a separate display, as shown in the figure;

2.Open the case of the computer host, and use a tool to remove a card strip on the side of the case and the power supply to facilitate the exposure of the graphics card;

3.After opening the case, look at the motherboard, the two long blue ones, both are PCIe slots, plugged in graphics cards, and the two white ones in the middle are PCI slots, plugged in sound cards and other devices, and the gold finger bar is on the left;

4.Place the computer motherboard on the side of the chassis flat against the ground, gently pull the graphics card out of the motherboard, pay attention to the position of the card slot of the graphics card, and carefully pull it up.

Nowadays, the general graphics card has a fixed card slot, and there are generally two screws on the back of the host, which is the position of the microphone speaker, which you should be able to see. There is also the fact that the graphics card itself has a buckle, which is at the bottom of the slot. If you don't understand lz, don't pull it out, it's easy to damage the graphics card, it is recommended to find someone who understands computers to help you get it.

There is a screw near the interface between the graphics card and the display, unscrew the screw, and at the other end of the graphics card interface, there is a switch that jams the graphics card, just turn the switch on.

1.Open the case side cover.

2.Remove the graphics card monitor socket from the screws or splints on one side.

3.There is a clip in the lower corner of the motherboard and the graphics card that needs to be unplugged.

4.Unplug the graphics card upwards.

Desktop graphics card removal Note:

1. Do not touch the gold finger of the board with your hands after dismantling, which will cause hidden dangers of contact problems.

2. Try to touch the metal part of the chassis before other operations to prevent static electricity from damaging the components.

Laptop graphics cards are generally integrated on the motherboard, except for a few notebooks that want to use the MXM3 interface for computers like Alienware, the graphics card can be removed and replaced.

2.The middle process is skipped, and the CPU fan can be seen on the line, and the CPU fan cooling device is pressed under the graphics card and CPU respectively;

3.Remove the heat sink from the original graphics card, otherwise the temperature is unimaginably high. The modified heat dissipation shelf turned out to be without insulating tape, in short, this shelf must be insulated from the graphics card.

Open the D side of the notebook, which is the bottom panel. If it is a separate graphics card, it is inserted into the motherboard of the notebook, the graphics card and the motherboard are parallel, open the two buckles of the graphics card, pull it out slightly, the graphics card will bounce up at 45 degrees, and then pull it out, when inserting, you need to insert it at 45 degrees with the motherboard, and then press it parallel to the motherboard, and then push it inward, and press the buckle after pushing it to the bottom, which is similar to the installation of memory. The book of the integrated graphics card is the graphics card integrated in the northbridge chip of the motherboard, and it cannot be replaced.

There is also a small Dell alien book, the discrete graphics card is soldered to the motherboard and cannot be replaced.

To remove the graphics card from your computer, the steps are as follows:

1. If there is a condition, you can wear anti-static gloves, and if there is no condition, wash your hands first to prevent damage caused by static electricity;

2. Unplug the monitor cable, disassemble the chassis, and unscrew the graphics card and the fixing screws on the chassis;

3. If it is connected to the auxiliary power supply cable, unplug the power supply cable and the power plug of the motherboard to avoid insufficient space for the graphics card;

4. Check the type of card slot, mainly to see the type of button, if the motherboard has two card slots, look at the other one that does not insert the graphics card, the main thing is whether the button is pulled out or pressed inside or slid left and right, the button is not opened and the graphics card cannot be pulled up, the current card slot is more convenient, it is pressed, and it will bounce up when you press it down;

5. After the graphics card is removed, it is recommended to clean up the dust of the chassis or motherboard by the way.

a.Remove the independent power plug that the graphics card is connected to.

b.Press down on the latch at the end of the slot.

c.Remove the graphics card vertically upwards.