How to install radiators after the house is installed, how to install radiators in the renovated hou

The installation of radiators in renovated houses can only be surface-mounted, and at the same time, other doors should be closed in the process of installation and kept in the closed construction. Secondly, the radiator should be installed under the window, so that convection can be formed, so that the heating effect can be improved. In addition, each group of heating should be added with inlet and outlet valves, so as to facilitate the installation of radiators in the house that has been renovated in the future

Surface-mounted radiators are the best option. Surface-mounted radiators are installed in a radiator installation method that does not need to be slotted on the wall or ground, and the heating pipe is laid directly on the wall, ceiling and other visible positions.

This installation can avoid damage to the wall, floor or ceiling, no drilling operation, no backfilling, generally two or three days can be completed. And it doesn't affect neighbors, and there is no dust and noise. If the house is a new community and everyone has not yet moved in, the heating pipes and radiators can be hidden, which not only saves space, but also makes the whole room look simple and beautiful.

If the house is being renovated and you want to install radiators, you can consider concealing the installation method, or you can wait until the renovation is completed before installing. The concealed installation of radiators is mainly to bury the pipes under the wall or floor before the water and electricity come out after the completion of civil construction, and finally hang the radiators on the wall.

Extended information: The installation of radiators is described as follows:

If the family pays more attention to home decoration, you can consider using the concealed installation method. This installation does not produce dust contamination, does not take too long and does not require frequent cleaning. However, if there is a problem with the radiator, the repair process is more troublesome.

It is appropriate to install radiators when the house is decorated, or it is appropriate to install radiators during the decoration process

After the house is well decorated, the radiators are installed, and most of the heating pipes are open pipes, and some of them need to be drilled through the cabinets, which is not beautiful.

1. On-site disclosure: At the installation site, the construction personnel will pave the plastic film and do a good job of on-site protection. 2. Mark the location of the hole

The on-site construction personnel will help the owner to dismantle the ceiling and observe the best opening position. 3. Hole-making: It is inevitable that there will be mud water when making holes, but professional construction will achieve good protection.

4. Installation of the host and thermostat: according to the actual situation, install the host and thermostat in the most suitable position. , heat sink installation:

Installing a heat sink in the room is also the terminal of the whole system. 6. Water pipe laying: Water pipe laying is a very important step in the whole system.

7. Connection system: After the system is connected, the installation process is completed, and then the final debugging is done. 8. Debugging:

Workers will exhaust the air from the radiator and start using and debugging the effect. 9. Completion sign: After the construction is completed, it will also help the owner restore the furniture and kitchen and bathroom ceilings.

After the renovation, the house can not be installed with radiators without permission, and the heating regulations of various provinces and cities have clear provisions.

Taking Shandong Province as an example, according to the "Shandong Provincial Heating Regulations", it is stipulated that:

Article 32 Users shall properly use and maintain their own heating facilities, and shall not have the following behaviors that hinder the normal operation of heating facilities:

1) Installing water discharge valves, exhaust valves or heat exchange devices on indoor heating facilities without authorization;

2) Unauthorized alteration of heating pipelines, installation of pipeline pumps, addition of radiators, or changes in the nature and mode of heat use;

3) Unauthorized discharge of hot water from the heating system;

4) Other acts that obstruct the normal operation of heating facilities.

Article 41 No unit or individual shall carry out the following acts that endanger the safety of heating facilities:

1) Destroying or modifying or dismantling heating pipe networks, signs, manhole covers, valves, instruments and other heating facilities without authorization;

2) Destroying or installing, dismantling, modifying, or interfering with heat metering facilities without authorization;

3) Hanging objects using heating pipes or supports;

4) Constructing buildings, structures, laying pipelines or planting deep-rooted plants within the prescribed safety distance of heating facilities;

5) Blasting, digging pits, excavating earth or piling within the prescribed safety distance of heating facilities;

6) Stacking garbage, sundries, flammable and explosive and other dangerous goods, and discharging sewage, corrosive liquids or gases within the prescribed safety distance of heating facilities;

7) Other behaviors that endanger the safety of heating facilities.