Is it because the Triangle plum plant does not bloom because the degree of water control is not enou

The failure to bloom may be due to insufficient water control, or it may be due to a lack of light and phosphorus fertilizer.

Triangle plum is a strong positive plant, in the flowering period to ensure sufficient light, one can prevent the branches from growing, and the other can promote flower bud differentiation.

Improper fertilization is also another reason for not flowering, Triangle plum can be applied nitrogen fertilizer during the growth period, but in the flowering period to phosphate fertilizer, if nitrogen fertilizer is still applied during the flowering period, it will only grow branches and leaves without flowering.

This is just one of the reasons, it could be the wrong size of the pot, it could be a lack of light, it could be that it was not pruned in time, or it could be that there are not enough ingredients.

There is this possibility, and it may also be caused by insufficient nutrition, and there are many reasons for this situation at present, which may be due to light or because of the variety.

Such a statement is very one-sided, and may also be related to light and nutrients, sometimes pests and diseases are not controlled in time, and there will be no flowering.

Usually watering master the principle of "not dry, not watering, watering is thorough". However, in order to bloom neatly and multi-flowered, water must be controlled before flowering. The watering of bougainvillea is controlled from September, and each watering can only be carried out after the potting soil is dry and the branches and leaves are soft and drooping, and so on and so on for half a month, and then the normal watering will be resumed after half a month.

1. Loose soil.

To maintain the triangular plum, we should pay attention to the choice of loose and fertile soil for planting, you can prepare peat, humus, perlite and sand according to the ratio of 5:2:1:2, so that it is mixed into suitable soil, and you can add an appropriate amount of Bika granular fertilizer to make it fertile.

2. Water and fertilizer management.

How to raise the triangular plum to do a good job in water and fertilizer management, increase watering in summer, watering twice a day to replenish water, usually keep the soil moist, but also in the growth period of about 2 weeks to apply Bika water-soluble fertilizer once, and wait until the end of autumn and winter to stop fertilizer.

3. Sufficient light.

If you want to raise the light-loving triangular plum, you should also provide it with about 8 10 hours of sunlight, so that it can receive sufficient sunlight and grow better, so that its branches are vigorous and full of vitality, and it should also be brightened and maintained in winter.

4. Prune branches.

To raise the triangular plum, it is necessary to prune the branches in time, and prune the branches that are too vigorous to avoid the growth of the triangular plum from being tight and poorly ventilated. Residual and diseased branches should also be pruned to prevent over-consumption of nutrients.

The draining of water is only a method of promoting flowering and flowering of Prunus triangularis, but it is not a key factor that harms the flowering of Prunus triangularis. The reasons for the harm to its flowering are also related to factors such as soil quality, temperature, light, fertilizer and water, pruning, disease, and the whole process of promoting flowering. Triceratops, is a perennial vine-like shrub native to Mexico.

Purple jasmine leaf flowers are green plants. People are called leaf flowers, and rhododendrons. The name of the triangular plum is famous because the petals are triangular and outflanked into a triangle;And because the color is mostly blue-purple, it is also called purple triangle and purple orchid;

It is also prosperous because the flowers are in full bloom like azaleas in clusters, and it is also known as the rhododendron. It is a common flower that is mostly seen in ecological parks, courtyards, and living balconies, prosperous and festive!In fact, the cause of the growth of the Triangle plum does not bloom is caused by many factors, not only the factors of insufficient drained water level, but also the lack of light, insufficient nutrients, insufficient pruning and other factors will lead to the failure of the Triangle plum plant to bloom.

Natural draining of water is a key factor in the core growth and flowering, and the triangular plum is a very tolerant green plant, which likes drought and dryness and does not like waterlogging. Therefore, at the level of triangular plum watering, everyone who maintains the triangular plum pot friends must be a lazy artifact.

Don't water it too diligently before flowering. Seeing that the soil layer below 3 cm is all sandy soil or the whole branch is beaten, at this moment everyone is watering it, pay attention to the water flow does not have to be very large when watering, to let it infiltrate it has been in a situation of water flow requirements, how to drive it to promote flowering. When the triangular plum has sufficient water, it will use this water to grow branches and leaves, so that it will not open and not bloom.

This results in no or little flowering on the long branches of the triangular plum.

But after strictly draining the water according to the imitation shout, it will make it feel that the conditions of its daily life are becoming more and more extreme, and it will quickly bloom and spread its own genes, and if it is late, it will not have a chance, which is also a gay man for most green plants, and the change in the conditions of preparation promotes it to accelerate the spread of genetic genes. Triangle plum belongs to the sun-loving potted flowers, especially in the growth period must have enough light, the light source is not enough or the light time is too short, which will lead to the growth of the triangle plum branches, thin, harmful to the pregnant buds and flowering. Therefore, the natural environment of breeding triangular plum must have enough sun, and the daily light duration can not be less than 4 hours, otherwise it will be attributed to insufficient light.

Insufficient water control is indeed one of the reasons for not flowering, as well as lack of light and phosphate fertilizer.

It's not because the water control is not enough, but it may also be because the spiders of the Triangle Plum have pests and diseases.

The branches of the Triangle Plum grow when watered, indicating that the watering is too frequent, resulting in too wet potting soil, and the branches of the Triangle Plum will grow wildly, affecting the bracts of the Triangle Plum, and the natural flowering is less or even no flowering. If you want the triangle plum to bloom, do the following 4 maintenance measures to achieve the purpose of making the triangle plum bloom.

1. Reasonable watering

The main reason for the lack of flowering may be that there is too much watering and the dominant growth of branches, resulting in lush branches and few flowers, or even no flowering.

Although the triangular plum likes temperature and humidity, the potting soil can not be too wet, and the control of precipitation is to reduce the water replenishment of the roots, inhibit growth, promote the formation of flower buds, and achieve the purpose of flowering.

When the Triangle Plum does not bloom, first control the watering of it, let the potting soil be in a dry state, "abuse" the Triangle Plum, so that it has a sense of crisis, plus other maintenance measures, the Triangle Plum will soon give birth to buds.

Usually watering the Triangle Plum, you should wait for the potting soil to dry thoroughly before watering thoroughly, or when you observe that the leaves of the Triangle Plum are wilting, it is not too late to water again.

Second, nitrogen fertilizer should not be excessive when fertilizing

During the growth period, nitrogen, phosphorus and potassium should be balanced when fertilizing, and a large amount of nitrogen fertilizer should not be applied in order to make the triangle plum grow faster, which will affect the verdant flower buds.

In addition, the potting soil of the triangular plum is too poor or compacted, which will also affect the growth of the triangular plum, and if you don't want to change the potting soil, you can make the soil looser by irrigating the diluted decomposed fertilizer and alum fertilizer water.

If you want to flower, you should mainly use phosphorus and potassium fertilizer to promote flowering, basically fertilizing a thin fertilizer solution every 10 15 days.

If the triangle plum does not bloom, as long as the above 2 conditions are met, it is enough? Of course, it is not enough, it must have enough light, and proper pruning.

3. Triangle plum needs a well-lit environment

Triangle plum is a light-loving plant, placed in a too dark environment, will cause the triangle plum to grow, the longer the branches are thinner, affecting flowering.

The more intense the light, the more vigorous the growth of the triangle plum and the more flowering. And with plenty of light, the color of the triangular plum bud is more gorgeous.

Of course, flower friends who do not have an open environment can place the triangular plum in a south-facing or west-facing position, and the light can be no less than 5 hours a day.

4. Prune the long branches properly

The pruning of the triangular plum is very important, especially for plants that have been raised for more than 5 years, and it is necessary to re-prune to promote the germination of new branches and increase the activity in order to bloom more.

As long as the environment is suitable, the growth rate of the triangular plum is very fast, when the branches grow too long, it appears that the plant is more messy, and it needs to be properly pruned to increase ventilation and light transmittance, and it can also promote more branches, which is more conducive to the flowering of the triangular plum.

Triangle plum is resistant to pruning, pruning residual flowers in time after flowering, topping, topping and topping can also inhibit the vegetative growth of branches, promote branching, and promote flower buds.

Based on the above 4 points, it is concluded that if you want to bloom Triangle Plum, you need to properly control water, fertilize reasonably, and have sufficient light environment, prune the residual flowers in time after flowering, and promote the germination of new branches and flowering.

Triangle plum water control does not bloom, watering on the growth value, should be the triangle plum branch treatment.

Fertilizer can be properly applied, if their fertilizer is not particularly sufficient, it will not bloom, and fertilization is also more important for it.

First of all, you should water in time, but also pay attention to the fertility of the soil, and then you also need to fertilize in time, you must spray pesticides in time, and you must spray insecticides in time, and the temperature must be grasped at about 23 degrees.

First of all, it is necessary to prune after a long time, and after the branches are pruned, they should be properly fertilized so that they can bloom.

At this time, you must pay attention to light, you must pay attention to ventilation, and you must cut off the excess branches and leaves, so that the plants can bloom.

When the water is fertilized, it generally only grows vegetatively.

Early flowering can be achieved by the following methods.

1.Control water and spend more time in the sun.

Triangle plum likes strong light and high temperature, is not cold-resistant, sun-resistant, and does not require much water, so special attention should be paid to the control of moisture. The flower bud differentiation of the Triangle Plum is largely affected by the amount of water, and water control should generally be carried out about 50 days before flowering (the normal flowering period of the Triangle Plum is April and November). The water control time is about 10 days.

2.Fertilize. After April, superphosphate and compound fertilizer are applied alternately, generally once a month. Liquid fertilizer should be applied every half a month during the peak growth period of Triangle plum, and more can be applied if the ambient temperature is higher. More phosphorus and potassium fertilizers are conducive to the differentiation of flower buds and ensure that flower buds are strong.

If the triangle plum is watered too much for a long time, there will be the problem of not flowering, there will be rotten leaves, rotten roots, stiff seedlings, black buds, falling flowers and so on. So many flower friends want to ask, what should I do if I water too much triangular plum? Don't worry, let's work out solutions according to different situations.

If, because the triangle plum is watered too much, there has been a situation, but the situation is not very serious, and the permeability of the potting soil is not bad, what we have to do is to just control the watering next, and there is no need to do anything too much.

If, because of too much watering, the Triangle Plum is on the verge of death, at this time, we can consider repotting the Triangle Plum to get rid of the waterlogged soil, but this will be more risky, and flower friends need to take the risk of trying.

Flower friends found through water control that the characteristics of the Triangle Plum are quite drought resistant, after the surface of the potting soil is dry, even if it is basking under the sun, the Triangle Plum can resist at least 2-3 days before the leaves wilt. From this, I realized that in fact, the triangle plum does not need to be watered too much, the previous watering has problems, watering too often, and all the problems of the triangle plum such as the growth of the flower, rotten leaves, rotten roots, stiff seedlings, black buds, falling flowers or something, are caused by the water. If you judge that the potting soil is dry and wet, flower friends use sorbet sticks, insert an ice cream stick on the edge of each pot, pull it out when watering, and see that the soil below is dry and then water, as long as the soil on the ice cream stick is wet, even if the surface of the pot soil is white, it is resolutely not watered.

You can water less and then when necessary. Let the triangular plum bask in the sun and get in touch with the sun.

It is necessary to pay attention to light, reasonable management, and reasonable ventilation, so that plants can grow better.

The reasons why the Triangle plum does not bloom are as follows:

1. Variety reasons.

Triangle plum does not bloom and related to the variety, some varieties are lazy flower varieties, such as Phnom Penh series of Phnom Penh Yellow, Phnom Penh Purple, Jin Qian Bei Bian Gong Powder, as well as small leaves green leaves and big red, etc., these lazy flower varieties, usually take care of the special care of the basic once a year to bloom, or even not once.

2. Do not cut for a long time.

If the triangular plum is not pruned for a long time, its branches will grow very long after flowering, and the next time it blooms, it will continue to grow from the top of the branch and continue to bloom, so that the branches will grow a lot, and the branches will grow a lot and long, making it difficult to flower.

3. Do not change the pot for a long time.

If the soil in the pot has not been replaced, then the soil will be basically compacted, and there will be a lack of nutrients, which is not conducive to the growth of the root system of the triangular plum. It is also not conducive to flowering, so we have to change the pots regularly.

4. Insufficient light.

Triangle plum and Yueji, jasmine, gardenia, longevity flower, crab claw orchid and other flowering plants, in the flowering period is very fond of light, when the maintenance environment light is insufficient, the plant will not be able to bloom, sometimes will bloom less.

The solution to the triangle plum not blooming:

1. Put the triangular plum in a sunny place, such as the yard, window sill, balcony and other locations, and have at least 6 hours of light a day, so that the leaves of the plant will become compact, the longer and more vigorous, and the bright flowers can bloom after 25 days.

2. Prune the plant when maintaining the triangular plum, and prune it appropriately according to the shape of the plant, like those unhealthy branches should be cut off, so that the triangular plum can emerge a lot of flower buds during the flowering period.