Is it possible for water to soak directly into a plastic raincoat during a super heavy rainstorm?

Yes. Raincoats are sewn from waterproof fabrics such as adhesive tapes, tarpaulins, plastic films, including the latest polytetrafluoroethylene (PTFE) waterproof and breathable laminated fabrics. Raincoat waterproof principle There are more and more materials and styles of modern raincoats, but no matter how they change, there is one property of raincoats that has never changed, that is, rainwater droplets on it will quickly gather into a small drop of water and flow away, which is the reason why raincoats are waterproof.

Rainwater falling on the surface of the raincoat is a non-wetting phenomenon because the attraction of rubber molecules to water molecules is much smaller than the attraction between water molecules, which prefer to clump together and roll down the surface of the raincoat. At the same time, there are many small holes in the fabric of the raincoat, but because the rain does not soak the rubber, it is difficult for water molecules to pass through the raincoat fabric from these holes, and these small holes cannot play a role in the organization of air molecules, which ensures the breathability of the raincoat.

When the rain is too heavy and the rainfall is too dense, the raindrops will pass through the waterproof layer and directly wet the fabric underneath, at which time the waterproof function of the raincoat will be invalid.

The factors that affect the waterproof function of the raincoat include the material of the raincoat, the degree of newness, and the weather it faces.

So, the raincoat is not a panacea either.

It is impossible for rain to soak through plastic raincoats.

However, in heavy rainstorms, there is a possibility that the plastic raincoat will be blown by the wind and thus permeable to the water, because the plastic raincoat is not strong; Raincoats can also be blown up by the wind and blow the rain directly onto the body.

It's possible. Heavy rainstorms are often accompanied by strong winds, and the strong winds are wrapped in torrential rain, and they can break through the plastic raincoat through the collar and other places, and burrow into the clothes inside.

There will be such a possibility.

When I was just in the very big heroine, your rain clothes can't be closed in the city, he will definitely have your face or under your feet is analyzed, if the rain is particularly heavy, he will also directly soak the branches, plastic raincoats, at this time, the plastic fish will not play a role, and the direct lens of your clothes will cause you some damage.

Saking is not possible, unless there is a crack and it is possible to seep through the air leak.

In a super heavy rainstorm, of course, it is possible to go directly into the picture of a plastic raincoat. Because he is not absolutely waterproof.

It is known that there is a layer of polymer coating on the surface of the raincoat, and its surface tension is generally 20-30dyne, and the surface tension of water molecules is as high as 70dyne, which is far more than the plastic used in the raincoat, so the water is 100% impenetrable to the modified coating (regardless of other reasons such as damage, line holes, acid rain, etc.), that is: water cannot penetrate the intact plastic raincoat.

No, the odds are slim.

As long as it is a regular and qualified raincoat, it will not leak rain, that's for sure.

But if it is not qualified, it is likely to leak rain.

As for the strong wind, the raincoat will blow up, and it will naturally soak through the clothes.

Maybe. You can try it, wear a raincoat and stand under the shower, and turn on the water flow intensity to the maximum to see if it will get wet.

As long as the plastic doesn't get damaged, it won't get wet. You can rest assured of this.

No, rainwater seeps through the cracks.

I think it's still possible, and sometimes I feel weird, but it's just going to get soaked.

In a super heavy rainstorm, it is possible that the water will directly penetrate the plastic raincoat, the heavy rain is not imagined by yourself, the intensity is very strong, it is best to find a place to avoid it first, and then go a little smaller.

As long as there is a small gap, it will soak through and pour it down the face.

Regardless of the gaps, the plastic raincoat will not be permeable.

A raincoat of poor quality will indeed penetrate, because if the quality is not good, it will be very thin, and it is not particularly waterproof, so it is recommended to buy a good waterproof effect.

If the rain is too much!

Whatever raincoat you wear, you will get wet.

Because there is a lot of water leaking in from the exposed places such as the face and hands.

The quality of the raincoat should be relatively better, because a good raincoat is generally thicker, the workmanship is finer, and the material is better, of course, if you want to not get wet at all in the storm, it is unrealistic, unless you sit in the car and do not come out.

The rainwater chapter reacts with the moisture that comes into contact with the body, and there is a slimy... I have a bold idea, add an absorbent fabric in the front, and add a waterproof one in the back, isn't it beautiful and not afraid of water? ?

As long as your plastic clothing is not broken, it will not leak rain.

It's going to seep in after a long time.

Oxford cloth. The product fabric obtained by specific weaving method of cotton or polyester has the characteristics of easy washing and quick drying, soft feel, good moisture absorption, soft fabric color, soft cloth body, good air permeability, comfortable wearing, and two-color effect.

How the raincoat works: Rainwater droplets on it will quickly gather into a small droplet and run away, and this non-wetting phenomenon is the reason why the raincoat is waterproof. Because the attraction of rubber molecules to water molecules is much smaller than that between water molecules, water molecules prefer to come together and roll down the surface of the raincoat.

At the same time, there are many small holes in the fabric of the raincoat, but because the rain does not soak the rubber, it is difficult for water molecules to pass through the raincoat fabric from these holes, so these holes cannot stop the air molecules, which ensures the breathability of the raincoat.

Extended Materials. There are a few things to keep in mind when purchasing:

1. The extent of the front cover of the front of the car. Longer amplitudes can be used to block rain more effectively.

Second, the sleeve of the rearview mirror should be anti-pulling. This is where raincoats are most likely to break, especially those with sea rubber raincoats.

3. Whether the water-splashing cloth raincoat is easy to take off the waterproof glue. Judging method: fold and press in half, if the inner layer of waterproof glue has obvious creases, it is an inferior material, easy to deglue and have a pungent smell.

Fourth, the seam of the water-splashing cloth raincoat should be covered with waterproof tape. A raincoat that does not wear waterproof tape is bound to be permeable.

Fifth, it is best to choose a one-piece raincoat to avoid throwing rain into the waist from the waist, and at the same time, the cuffs and trousers should be tightened.

6. The fabric must be thicker to prevent it from being torn by the wind during high-speed riding.

Plastic raincoats are impermeable, which is the property of the plastic itself. The rain was so heavy that it soaked through the raincoat, and water entered through the collar of the raincoat, or at the cuffs.

When it rains, the rain passes through the raincoat as long as the raincoat is torn. Or it went in through the gap in the collar.

The molecular structure of plastic is relatively complex, and the materials used in different ** plastic raincoats may be different, and there is no way to generalize.

If you don't consider any gaps at all, a regular PVC plastic raincoat should be impenetrable, and the composition itself is hydrophobic vinyl chloride, which is also widely used in waterproof layers.

However, in reality, it is difficult to meet this condition of "no gaps", and even if it is a new raincoat, there are often many micro-gaps on the top that are difficult to detect.

Unless the raincoat is made like a plastic bottle.

Possible. After all, even the human brain may be full of water, and how can plastic be completely waterproof.

No way. Plastic is denser than water, and the raincoat is made of polyethylene, which is a non-polar molecule, while water is a polar molecule, and according to the "similarity dissolution principle", water will not wet the body through the raincoat.

Which is the best raincoat fabric?

Material 1: PE PVC

Both are plastic raincoats, and PE raincoats are much thinner than PVC raincoats, which are common disposable plastic raincoats. PVC raincoats are slightly thicker and have a lower breakage rate than PE raincoats, but it is not recommended to reuse.

Material 2: Nylon + PVC coating.

Nylon is more abrasion resistant than all other fibers and is less prone to breakage.

Material 3: polyester + PVC coating.

Polyester has good wrinkle resistance and shape retention, and has high strength and elastic recovery ability.

Material 4: Oxford cloth + PVC coating.

Oxford cloth has a light texture, a soft feel, good water resistance, and good durability.

No, the plastic raincoat is waterproof and won't get wet in the rain.

The possibility of rainwater completely penetrating the polymer is zero, the surface tension of water molecules is 70dyne, and the surface tension of several known polymers that make raincoats waterproof is only about 20-30dyne and cannot be wetted. A simple example is that if you use a non-stick pan at home to cook porridge, it is impossible to scratch and collapse the coating of the rotten non-hard objects. It is not excluded that the raincoat you use is shoddy (but if the raincoat is soaked in solvent for a period of time, it may be penetrated, and the solvent molecules can slowly migrate out of the outer surface through a part of the plasticizer filled in the high-quality mixture, just like the oil permeated under the bottom after a few hours of convenient bag fritters).

As has been answered before, plastic polymers have a surface tension lower than that of water molecules, which will act as a physical barrier (a few exceptions are nylon polyamides, PA-6 and PA-12 have about 10% water absorption and swelling, but only absorb water on the rain surface and do not pass through), just like you can never sink gasoline to the bottom of the water because of the different densities. There is only one possibility that the plastic raincoat is poorly made, too thin, washed away by rain, or the polymer pore size is made large to save money. Differential surface tension is a way of physically shielding the contact between molecules without being affected by human will – just like if you fill water in a disposable plastic water cup, you put it in a place where it is pouring rain and it will not leak 10,000 times.

As long as it is not broken, no matter how heavy the rain is, it will not penetrate, and if it is broken, even the drizzle will pass through.

Unlikely, because of the plastic raincoat. itself is meant to be defensive. Water molecules can't pass through plastic molecules, so it's impossible to get through even the front of the rain.

The plastic raincoat may be exposed to very large rain in the front, if the rain is small, it will not be drenched in a raincoat, if the rain is heavy, the rain will penetrate after wearing a raincoat outside for a long time.

Generally speaking, thick plastic raincoats will not get soaked by rain, but there is a risk that water can seep into such raincoats as plastic film. Because the thin plastic film is easily stretched in heavy rain, small holes can seep into the rainwater.

It is impossible for a plastic raincoat to be penetrated by very large rainwater on the front, and the plastic raincoat is waterproof.

No, the odds are slim.

No, the raincoat is very waterproof unless there is a visible hole.

It is also possible that it has something to do with the material and craftsmanship of the raincoat.

No, plastic is very waterproof.

No, the plastic raincoat is waterproof.

Textiles have a test index, that is, the height of water pressure resistance, and there is no problem with general plastic raincoats.

You can try it with a high-pressure water gun, just wash the car, and you can resist it.

Summary. Hello, if you don't consider the gaps and sweat inside, even if it rains heavily, it won't penetrate the raincoat head-on, unless the raincoat is torn by heavy rain

Is it possible for a plastic raincoat to be exposed to rain on the front? Gaps are not considered, or internal sweating. When it's raining so hard, is it possible that the rain will shine through the plastic raincoat?

Hello, if you don't consider the gaps and sweat inside, even if it rains heavily, it won't penetrate the raincoat head-on, unless the raincoat is torn by heavy rain

There's a limit to everything. Even if the raincoat is waterproof, it should be permeable when there is a lot of water.

It will take a long time for water molecules to penetrate, and it will take a lot of time for water molecules to penetrate, and the density of water molecules is larger than it, so it is difficult to penetrate.