How can you tell if the tap water in your home is installed correctly?

First of all, we can see if there will be white precipitation after boiling in tap water, if there is white precipitation, it is not installed correctly, and secondly, we can also see whether the tap water is clean and thorough, and there is no peculiar smell.

We can boil the water and pour it into a cup to see if there is any white precipitate in the cup after a while, and then whether there is any peculiar smell.

If it is not correct, there will definitely be a situation where the cold and hot water will be mixed in, or the water will not come out, so you can see it by looking at it.

Summary. Finally, you can use a water quality detector to help detect, if the PP cotton turns yellow quickly, it means that there are impurities, and water purification equipment is needed.

Hello, there are several relatively simple ways to detect household water, whether it is up to standard, first, use a transparent container, put it in a well-lit place, put it for a few hours, and observe it later, whether there are impurities.

Second, it is to boil water for a long time to see if there is any scale.

Finally, you can use a water quality detector to help detect, if the PP cotton turns yellow quickly, it means that there are impurities, and water purification equipment is needed.

Water that meets the standards is also good for the body.

Hope this time helps.

Comparisons are made based on the principle that tap water quality will be better than reclaimed water.

1. There is an analytical means to measure the conductivity is the most direct.

Conditional on the analysis of water quality of the whole project, salt classification of anion and ion, pollutants of various organic matter and poison.

2. If there is no means, use 2 bottles of mineral water bottles, 1 group of open caps and put them in the sun, and one group of lids should be placed in a dark place with high temperature. Observe that bottle, your water will spoil first, and it will smell bad first, then the first thing to spoil is the reclaimed water.

3. Of course, the premise is that the tap water you mentioned meets the national drinking water standards. Because, if your tap water is not up to standard, it will be difficult to compare.

There's nothing good about it at home.

The easiest way to do this is to find a water meter.

You should be able to find water meters for tap and grey water.

If you don't know, just ask about the property or something, you can always ask).

Turn one off, turn one on.

Try the faucet again.

The big brother who said, "Reclaimed water is water with a pH of 7".

Reclaimed water refers to the water that can be used beneficially after proper treatment to reach certain water quality indicators, meet certain use requirements, and be used beneficially.

It is generally used for irrigation and toilet flushing, and cannot be drunk.

It has nothing to do with pH.

Traditionally put water.

Divided into water, water (commonly known as water and water), water is clean tap water, sewage is both discarded wastewater, in the decoration of their own pipes, reclaimed water is the use of tap water is relatively clean collection, after sterilization, sterilization and purification treatment, repeated to do similar toilet flushing, watering grass and other non-drinking water, generally by the community unified treatment, set up a separate pipeline, which is conducive to saving water resources.

The more direct distinction at home is the reclaimed water pipe in the bathroom and the tap water in the kitchen.

Reclaimed water is water with a pH of 7, and tap water is generally between, and the probability of keeping it at 7 is almost zero. Therefore, it is possible to detect it with a pH meter. The easiest way to do this is to buy a pH test strip to test it. It only sells for a few bucks in the chemical store.

A simple way to test whether the tap water is up to standard:

1. With the help of water quality detector for detection, the water quality detector can be installed on the faucet, if the PP cotton (white) on it quickly turns yellow, it means that the impurity content in the water is high, and the use of water purification equipment needs to be considered.

2. Use a relatively transparent container, a glass cup without printing, and a disposable plastic cup. Fill a glass of water, leave it for a few hours, and then look carefully in a well-lit area to see if there is any suspended matter in the water. If so, it is recommended to deal with it.

3. Basically, every house has a water heater or a boiling kettle for boiling water, open the kettle to see if there is scale or rust in it. If there is one, it means that the water hardness is on the high side. Drinking water with high hardness for a long time can lead to the disease of stone accumulation, which is not good for the stomach and intestines.

4. Boil some water in household tap water, brew a cup of tea, leave it for 1 day, and observe whether the color turns black after 1 day. If it turns black, it means that the heavy metal content exceeds the standard.

5. Boil water, then drink it, and feel carefully whether there is any peculiar smell in the water during the drinking process. Whether there is an astringent taste. If there is, it means that the hardness of the water is high.

6. Use a cup to catch water under the tap and smell if there is a smell of bleaching powder in the water, if so, your tap water may contain residual chlorine.

1. Look: Use a glass of glass with high transparency to be filled with a glass of water, and look at the light to see if there are any fine substances suspended in the water? Let it sit for three hours and then observe the bottom of the cup for sediment? If there is, it means that the suspended impurities in the water are seriously exceeded;

2. Smell: Use a glass to get a glass of water as far away from the faucet as possible, and then smell it with your nose, is there a smell of bleaching powder (chlorine)? If you can smell the smell of bleaching powder (chlorine), it means that the residual chlorine in the tap water exceeds the standard.

3. Taste: Drink hot boiled water, whether there is a smell of bleaching powder (chlorine), if you can smell the smell of bleaching powder (chlorine), it means that the residual chlorine in the tap water exceeds the standard.

4. View: Make tea with tap water, and observe whether the tea turns black after overnight? If the tea turns black, it means that the iron and manganese content in the tap water are seriously exceeded.

5. Taste: Taste boiled water, is there any astringent feeling in the taste? If so, it means that the hardness of the water is too high.

6. Check: Check the water heater and boiling kettle at home, whether there is a layer of yellow scale on the inner wall? If there is, it also means that the hardness of the water is too high, (the content of calcium and magnesium salts is too high).

People drink tap water every day, and the quality of water in the home is directly related to people's health, so how do we understand the quality of tap water.

Question: My family bought a 3m water purifier, but the detection indicators have not changed with the water quality testing pen bought online.

The indicator shows 216

Question: I am from Zigong, Sichuan, and the local water quality is poor.

The quality of softened water should be within 50 to achieve a good effect, and it is best to reach less than 20.

Question: Can I use a water quality test pen? I don't understand.

What does it mean to weaken water?

That is to say, the large particles of impurities in the water quality are filtered through the water purifier, and the minerals in the water are not filtered out, and the taste of the water is still relatively hard.

There is a relatively cheap detection pen, which is purchased online.