The user is busy, please dial the other party later

There are three situations that will prompt the user that they are busy:

1.The user is in the other party's blacklist, and the other party's set ** returns the prompt "The user is busy, please dial again later";

2.If the other party is on a call, the user will receive this prompt when dialing the other party's mobile phone;

3.If the other party is inconvenient to answer, the user's ** will hang up directly or not answer, and will also receive the same prompt.

There are the following reasons for calling ** to others to keep prompting a busy signal:

1. The other party has indeed been on the call, it is recommended to wait for a period of time before calling;

2. If you call many times in a row, it still prompts a busy signal, it is possible that the other party has pulled your mobile phone number into the blacklist, you can try to use another mobile phone number to call, if you can connect normally, it proves that the other party has indeed blocked you.

The user who hits the other party is busy does not necessarily mean that he has been blocked. There are 4 possibilities:

1. When the other party is on the call, when the other party is on the call, dial **, and the system will automatically prompt that the dialed ** is busy; 2. The other party's mobile phone is turned off, if the other party's mobile phone is turned off, it will also prompt the other party to be busy when dialing **; 3. When the other party's signal is not in the service area due to signal reasons, the other party's number is not in the service area, it will prompt that the other party is busy when dialing**; 4. The other party has set up interference interception, such as setting a blacklist or setting the mobile phone to airplane mode, which will cause this situation to occur when calling the other party.

You can call multiple times during the time period, and if you keep doing this, you'll be blocked.

If you call someone's **, the system prompts the user to dial is busy, please wait and dial, then there are two possibilities, one is that the other party's signal is not very good, so you call the past system can not recognize the other party's status, it will use such a prompt tone, and there is also a situation that the other party will block you.

What you're talking about is when we hit **, in this case, it is generally likely that the other party is playing with someone else**, and the other situation is that the card in your mobile phone is correctly placed and cannot be used.

Hello, the user you searched for is busy, please dial again later".

1. The tenant who dialed is busy and has no time to answer**, so he hangs up directly, and this kind of prompt will appear.

2. If the dialing user is on a call and cannot answer, this kind of prompt tone will also appear.

3. If the dialing user sets a restricted number to reject the call, the mobile phone will automatically hang up the call of the restricted number, and this prompt tone will also appear.

4. If your mobile phone card has just been handled, and some services have not been activated in the opened business, such as the group number or family number service, if you dial the group number or family number, this prompt will also appear.

5. If the dialed user's mobile phone has enabled call forwarding, the incoming call will be rejected by another number, and this prompt will appear in the world-type Sakura.

1. When the other party is on a call, the system will automatically prompt you that the ** you are dialing is busy. 2. The other party's mobile phone is turned off, and it will also prompt the other party to be busy when dialing **. 3. When the other party's signal is not in the service area due to signal reasons, the other party's number is not in the service area, it will prompt that the other party is busy when dialing**;

Demo model: iPhone 12 && Huawei P40 &&& Xiaomi 11 System version When the other party is on a call, the system will automatically prompt you that the ** you dialed is busy.

2. The other party's mobile phone is turned off, and it will also prompt the other party to be busy when dialing **.

3. When the other party's signal is not in the service area due to signal reasons, the other party's number is not in the service area, it will prompt that the other party is busy when dialing**;

4. The other party has set up interference interception, such as the other party has set a blacklist or set the mobile phone to airplane mode, which will cause the system to prompt you to call ** is busy.

If the signal is not good, or there is no signal, this phenomenon will occur, which used to prompt that the user you dialed is not in the service area, but now there is no such statement, and the user is busy.

One scenario is that the other party is indeed on a call, and the other is that the other party hangs up when you are dialing, so they will hear "the user you are calling is busy".

You're calling** in the middle of a call

1. The ** you dialed is on a call.

2. You hit him**, and he pressed the hang up button.

Make model: iPhone 13

System: <>

The meaning of Tan Xiao is that the other party is on the phone, and the user will receive this prompt when he dials the other party's mobile phone.

There are also the following possibilities: the user number is in the other party's blacklist, and the other party's response prompt is [the user is busy, please dial later]; When the other party is inconvenient to answer the user's **, you will receive the same prompt when you hang up directly or do not answer; The busy line cannot be connected**It will also prompt [the user you dialed is busy], and the called party can be quietly opened again after hanging up**.

Summary. 1. Interception.

With the increase of harassment**,There are many users who have turned on the "harassment interception" function,If you are not the other party's friends、Relatives,Then the other party's address book must not have their own number,And there are many software will mark the number,If you are marked,And not the other party's familiar number,It is easy to be intercepted by the rules set by the mobile phone。

The user is busy, please dial again later.

There are many reasons why this may be the case.

1. Interception of Zhendongsheng With the increase in harassment, many users have turned on the "harassment interception" function, if they are not friends and relatives of the other party, then the other party's address book must not have their own number, and there are many old software will mark the number, if they are marked, and not the other party's familiar number, it is easy to be intercepted by the rules set by the mobile phone.

Second, in addition to being intercepted on the blacklist, there is also a situation that is listed as a blacklist, once the other party adds himself to the blacklist, there are many reasons for raising the stockings, such as temporarily unreachable, the other party has turned off the phone, is not in the service area, the other party's number has been shut down, and "the user you dialed is busy, please dial again later" and so on.

In addition to harassment interception and blacklist, there is also a situation of backfighting, that is, "hung up", when the user dials the other party's mobile phone, the other party does not want to answer or something is inconvenient to answer, and when Xiangtan hangs up, there will be a prompt of "the user you dialed is busy, please dial later".

If a sentence rings before, it means that the other party is busy, and if you don't drop it, there is a high probability that you will be blocked.

Ask about custom messages].