How do 3rd graders write a paragraph during the handicraft activity?

Writing ideas and key points: Write about making a flower by hand, and write about handmade in detail.

process, and finally summarize what has been gained from this handicraft activity.

Body: Today, I made a flower. Not with some paper and cloth, I made it with a carrot.

I'll slice it first. Start by taking a knife and placing the carrots on a plate and chopping them. When I cut to the second slice, I accidentally cut it diagonally, and the radish slice was thin on one side and thick on the other.

What to do? I first flattened the radish diagonally, and then cut a slice, but it was still slanted. I don't have to cut it this time, I thought:

If you don't need to cut it, then it's thick on top and thin on the bottom. I've cut the rest of the slices, and I'm about to roll them up.

I'm going to roll up. I wrapped the cut first, and then rolled it up, and soon after I rolled it, the pieces fell apart. I'm so unhappy that all my efforts have been in vain.

Then I wrapped it again, wrapped the piece, and spread it out again. After spreading out a few times, when I was ready to do it, it was finally done. I also went from being sad to being happy.

Then after a piece dropped, I went to wrap it again, and in the future, as long as it was wrapped again, I was very happy. Now I'm going to fix it. I pressed it hard with my hand, it was much better, it wouldn't fall off, but I thought it might be rotten, so I relaxed a little, and I felt that it was too loose, no matter how I adjusted it, it was not good, and then I chose a moderate degree, and now it was good, and it was finally fixed.

I'll get a toothpick first. I saw that there were no more toothpicks in the toothpick box. I thought, there might be one on the top of the refrigerator, I looked at it, and sure enough, there was a new pack of toothpicks, and after I brought it, I put the toothpicks in the box, and I put some of them, and they were about to be stuck in the little flowers.

I'm going to tie the toothpick on. After breaking the toothpick, I tied the toothpick up, and I looked, ah, it's terrible, the toothpick is like a cupola towards the range hood, as if it is about to fry the range hood. Fortunately, it is not a real cupola, otherwise the range hood will be "dead and dead".

Finally, I got the toothpick straight. Sister Radish Xiaohua smiled, as if to thank me. When I was done, I was very happy.

I have to do a craft every day because I have to find an essay topic. In the future, when I write an essay on handiwork, I will definitely write about other things that happen in my life.

How do 3rd graders write a paragraph during the handicraft activity?

The process of the handicraft activity is as follows:

The tools used are also very simple, mainly limb scissors, which require sharp and sharp. Others such as staplers, erasers, pencils and rulers. On this basis, some tools for paper engraving, hot paper and dyeing were gradually added to make Siji's paper-cutting art more comprehensive.

There are four steps in the production of paper cutting: drafting, staple, cutting, and mounting.

First, the draft

Before cutting paper, the first thing to do is to start the draft. There are two ways to copy and create a paper cutout.

1.For beginners, it is more difficult to start creating a draft or one-handed cutting, so it is better to start by copying the sample.

2.To create a sample, through the repeated practice of copying the initial sample, after mastering certain skills, you can start to create a sample by Li Qingfeng. In the process of creating a sample, it should be considered according to the main content, composition, modeling, etc. of the work.

2. Staple paper

The sample is placed on a stack of colored paper of the same size, and the binding machine is used to splunge along the sample, and the gaps in the sample should be set to prevent movement. The choice of colouring paper can be selected according to individual needs and the content of the work. It's good for beginners to order one or two, and when they become proficient in the future, they can increase the number appropriately.

3. Cutting and engraving

Cutting is the most important step in the whole production process, which is related to the success or failure of the production of the work. Those who are new to paper-cutting should study hard and gradually master the skills of cutting.

Fourth, mounting

Careful mounting of the work not only increases the aesthetics, but also protects the work.

The simple way to make a handmade desk calendar is as follows:

1. Draw a marking line with a size of 8 cm, cm, 8 cm, 4 cm, and 1 cm on the cardboard.

2. Cut it along the leftmost line, then fold it to make a calendar shelf, and fix it with double-sided tape. Dress up as Zen.

3. Make 4 holes with a hole punch at the top.

4. Take 13 pieces of cut 7 cm by 6 cm colored origami and make four holes with the same punch.

5. Take 12 more pieces of white paper of 5 cm by 6 cm and draw the grid of the wheel. Write the calendar for 2022 on a white piece of paper.

6. Stick double-sided tape on the back and sides of the calendar and stick it to the bottom of the colored origami.

7. The remaining piece of colored origami is used as the cover, and 2022 is written on the cover. I fasten the calendar and the calendar frame together with a staple coil and fix it. In this way, the 2022 desk calendar has been made.

How to write the process of doing the handicraft of the cover in the third grade is as follows:

Find raw materials: If the third grade children make handicrafts, it is relatively simple to find raw materials, you can choose some cardboard, cards or some cans and other things, but you must pay attention to this when looking for raw materials, which needs our attention, that is, the safety of raw materials.

If you can't judge whether this thing is safe or unsafe, you should seek the help of your parents or teachers to find as many raw materials as possible under the premise of ensuring your safety.

Production: It is also necessary to pay attention to one point when making, and it is also a safety issue, because safety is often a point worth paying attention to, such as the production of some cans we mentioned earlier, because the cans are aluminum, and this kind of bottle is easy to cut into the object, so you must need to find the help of parents or teachers in the process of use, don't mess around with yourself, it is not good to hurt yourself.

And then when making it, we must pay attention to some related collocations and so on, which is also quite crucial, so we must pay attention!

Summary and explanation: Finally, after the production is completed, you must make a summary of the explanation, for the entire hand-made process can write a small concise, and then briefly describe the specific use of your thing and a specific use, and then summarize what you need to pay attention to when doing handwork, which is still very critical.