-
Anonymous users2024-02-121. Observation.
Every time you go to the crane machine, it is not for no purpose to put coins to clip, so most of them can not be clipped, observe which crane machine is clamped, and leave without clipping. Such, you can go on.
Another way, that is, if someone else is holding the doll you want, don't clip it. Because 99% of the crane machines like this are programmed, as long as one is clamped, the program will start from scratch. Unless you fill in the coins from scratch.
Or, you're lucky, the clip hangs on the rope, this kind of shit luck.
2. Determine the location.
You can press the button next to the joystick to lower the claw, and when you go down the claw, you have to press the button again to see the claw reach the doll's body or half of the head (this is the key, and it is also the direct reason why many people grab the claw and release it), and then the claw will come up with the doll, you just have to wait.
Tip: The second press is to increase the power of the claw, and the reason is that you know the fundamental difference between pressing once and twice.
3. If the doll you catch is near the exit of the baffle, as long as you catch the doll within 3 times according to what I said, you will definitely be able to come out, if the doll you want is far away.
It's repeated a few times like this, but it's just a process of moving the doll slowly, moving little by little, and when it comes to the exit of the baffle, there must be a doll within 3 times.
-
Anonymous users2024-02-11Hello dear, I'm glad to answer for you, you can follow the steps below: 1. Push the doll to, the doll is easy to fall off. If you really like this doll, it is recommended to pay two coins to pave the way, put the doll down and then grab it.
2. The method is very simple, that is, the clip falls a little off, so that one paw is on the doll's head, and the other two paws grasp the doll's body obliquely, and the doll will be pulled down after the clip is withdrawn. 3. Throw the clip First of all, the target doll should not be too close to the glass or the acrylic of the outlet, otherwise it will be knocked by the clip. 4. After confirming that there is no obstacle next to the target doll, throw the clip left and right, let the clip swing left and right sharply, find a good time to press the drop button, and wait for the claw to be clamped to the doll after it is retracted, and the doll will be thrown to the exit.
5. Pay attention to calculate the position of the clip, after clamping the doll, the clip will not relax at this time, and swing while retracting, and the clip will generally let go after reaching the top.
-
Anonymous users2024-02-101. If you want to catch more dolls, you must choose a good claw machine, and the position of the doll from the baffle should not exceed 10 cm. You can put in a coin, push the joystick, if the claw is going to be very powerful, it means that the claw is too loose by the boss, and you can't catch the doll, don't play, just give up.
2. If you don't shake your claws when you touch them, you can still wait for others to play first. Because each machine has a set odds, the grip of the claw is different every time you play. If you feel that the claws are loose when watching others play, wait for him to play after he finishes playing, so that the grip of the claws will be greater when playing, and the probability of catching the doll will be much higher.
Precautions for playing with dolls.
1. First of all, choose the target, and then aim at the target and gently move the torsion rod without hesitation, because there is a time limit for grabbing the doll, and if the target is not found within the time limit, the claw will jump down directly to catch it. It is also possible that it was caught, but there was no time to return.
2. Find the right position and try to aim the paws at the right doll, if you put it right, it will be easier to catch. If the claws are larger and the doll is smaller, try to aim at the head and waist of the doll lying flat, or the large head part is easier to grasp. After grabbing it, gently and quickly go back to the exit, press the button and release the grabbed doll.
-
Anonymous users2024-02-09The grabbing process of the crane grabbing machine usually needs to pay attention to the following aspects in order to improve the success rate of grabbing:
1. Observe the position and posture of the doll. Before choosing a crane machine, you can observe the position and posture of the target doll, and choose a position that is easier to grab. In addition, pay attention to whether the posture and position of the doll are stable, if the doll is not placed steadily, then it will be more difficult to grasp.
2. Determine the grabbing position and direction. Before the coin, you can observe the position and angle of the crane machine grabbing device, and determine the grasping position and direction according to the position and posture of the doll, which can improve the success rate of grabbing.
3. Adjust the timing and intensity. After the pure ruler carries the coin, you can observe the speed and direction of the grabbing device, and adjust the time and strength to ensure that the grabbing device can successfully catch the target frog, but you can't rely too much on the machine, and you need to properly control the grabbing strength.
4. Avoid pursuing too much detail. When operating the crane machine, don't pursue the details of the doll too much, such as the folds of the clothes, the fingers of the doll, etc., these details can lead to the failure of the grab.
In general, the grabbing process of the claw machine requires skill and patience, and it is necessary to carefully observe the position and posture of the target doll, adjust the position and direction of the grab, and reasonably control the time and strength, so as to improve the success rate of grabbing.
Whether the crane machine is good or not, there is a certain truth in getting what you pay for, so the main consideration is the cost performance, configuration and operation experience. It is examined from the following aspects. >>>More
1. Don't rush it. It is estimated that most of the little girls have a soft spot for the cute little dolls, as soon as they see the little dolls, they can't walk, especially when they see the mountains of dolls in the doll machine, and only spend 1 yuan to get a doll opportunity, it's really good, when there is such an idea, you must be calm, you have to analyze, the doll machine as a profitable entertainment machine, the demand is greater than the pay, that is, put 50 dolls in the machine if you can't earn more than 5 times the profit, it doesn't do, so, In the face of the crane machine, you must be calm, you must invest money to catch the crane machine if you don't see it, that will only make your money drift 2, pay attention to observation, what to observe? 2 aspects, observe the condition of the machine and equipment, don't be impulsive to catch, see how others catch, when others catch the situation of the mechanical claw shaking, if the mechanical claw shaking is intense, it is recommended not to be nostalgic for this machine, because the grip of the claw is insufficient, and the back and forth shaking undoubtedly increases the difficulty of catching the little doll, the most important thing is that if the shaking is violent, when you are ready to claw, it does not stop, it will seriously affect the accuracy of catching the doll, and it is very likely to hit the situation of which point; Another one to observe the placement of the doll, pay attention, not the doll you like will definitely be able to catch out, because the grip of the mechanical claw is insufficient, therefore, as long as the little doll is pressed or squeezed, it will cause you to be unable to catch it, so, before grabbing, be sure to see if the target is pressed and squeezed 3, grab the doll to choose the middle area or near the exit, sometimes you will find that the doll around the glass wall of the doll machine is more beautiful than the middle zone, don't be fooled at this time, Don't grab the dolls around, because the top of the mechanical claw is its mechanical and circuit part, when the mechanical claw runs around, you will find that because of the space problem, the mechanical claw is not close to the glass wall, 4, don't go over the mountains and mountains, sometimes you will find that there will be a doll that can be caught in the middle of the area, don't scratch, because even if you successfully grab it, when you come back, it will be because of the height of the problem that the doll that has been caught will eventually fall due to the doll below the doll. The problem of the size of the doll, the big doll can not be caught, the heavier it is, whether it can be caught is one thing, even if it is caught, it is also dragged away, on the small power of the mechanical claw, you still don't grasp the big one, visually, find some mechanical claw one claw can be the doll as a whole or 2 3 parts of the doll to catch, the probability of success will be very high 6, the problem of the size of the mechanical claw, play more, find different doll machines, the size of the mechanical claw is different, needless to say, just observe carefully, choose the big claw machine to play, it's okay 7, skillful, sometimes the doll will be near the exit, in fact, it's very easy at this time, even if you pay a little more, it doesn't matter, because such a doll can roll off with a few pulls with mechanical claws.
First put in the coin, and then move the long stick to grab the grip of the crane machine, you have to control the speed and strength, not too fast and too strong. The button next to it is pressed when you decide where you want to clip the doll. Of course, this requires skill, I hope it can help you.
Red Monster: 24 times, spacebar.
Blue Advanced Ram: 27 down, spacebar. >>>More
A home practice of baby cabbage.
Ingredients: 3 baby cabbages, about 3 garlic crumbles, shredded mustard, red pepper, shallots. >>>More