-
The main reasons why the watch does not go are: the movement gear is misaligned, the watch is magnetized, bumps, and the oil sludge is dried for a long time when it is left on hold. The most common reason for the failure of the watch not going is the lack of power of the watch and the movement of the watch does not work.
When the mechanical watch stops, the priority is to think about whether it is caused by lack of power. Hand-wound watches should be wound at the same time every day as much as possible so that the watch can operate with sufficient energy for the next 24 hours. Quartz watches, on the other hand, can be actively wound and should be worn on the hand for more than 8 hours a day to replenish the mainspring.
Lack of exercise after wearing it will also show that the watch does not move or stop.
-
If you have passed the insurance, you can spend your own money to repair it, and if you buy more than 8,000, you are reluctant to spend one or two thousand to repair it and change it?
-
The Mido brand is the general entry-level brand, which depends on the degree of wear and tear of your watch and style, of course, there are other factors that have an impact, it is recommended that you go to a regular company to see, the general Mido brand is a price comparison civilian, the valuation of about eight thousand to buy **** is not high, ** is definitely less than five fold, the estimate is two or three thousand, the invoice insurance card box or something if possible** can also come up, specifically it is recommended that you take the physical object to the regular ** second-hand brand watch company, Nanjing has, It seems that there is a relatively large one just out of the Gulou subway station, and the scale is quite large, you can try it.
-
The location of the Mido Watch After-sales Service Center is located in Room 918, 9th Floor, Landmark Plaza, Nanjing East Road Pedestrian Street, Huangpu District, Shanghai. At the same time, it is necessary to avoid strong external impact during wearing, and stay away from objects and environments with strong magnetic fields such as television, stereos, and so on.
In addition, it should be kept at full mainspring once a day to ensure the normal kinetic energy of the watch. Do not open the back of your watch without permission, as it is the job of a professional watch repair technician and blind opening may prevent the watch from being reattached.
-
If you have a special ** watch, don't go to a private pit man Nanjing Drum Tower.
-
The ** of the watch is generally three to eight folds, but the specific is to the appraiser to identify the quality of the watch, if there is a package when buying the watch, bills, certificates and other accessories is the best.
The principle of the watch is that the watch is a precision instrument used to indicate the time, and the principle of the instrument is to use a vibration system with a constant cycle and continuous vibration as a standard. If you know the time it takes for the vibration system to complete the full vibration of a watch (vibration period) and calculate the number of vibrations, then the time elapsed after so many vibrations is equal to the vibration period multiplied by the number of vibrations. i.e. time = vibration period and number of vibrations.
The balance spring mechanical watch adopts the balance spring as the vibration system, the balance wheel 1 is fixed on the balance shaft 2, and the upper and lower journals of the balance shaft ** are in the bearing, which can rotate around the bearing. One end of the hairspring part 3 is fixed on the pendulum shaft, and the other end is fixed on the splint. Due to the elastic deformation of the hairspring, the movement of the balance wheel changes from rotation to reciprocating motion.
When the balance spring system oscillates, it is affected by the friction of the bearing, the air resistance, and the internal friction of the hairspring, and the amplitude (amplitude) of the oscillation will gradually decay until it stops. In order for it to continue to vibrate without attenuation, the balance spring system must be replenished regularly, i.e. there must be an energy source in the watch.
The periodic replenishment of energy to the vibrating system is achieved by means of a special mechanism, the escapement. The escapement is also used to calculate the number of oscillations of the balance spring system. Therefore, the balance spring system and escapement are the key devices of a mechanical watch.
-
The white of the watch is generally in three folds du to eight folds, not zhi
Specifically, it is necessary for the appraiser to identify the DAO fineness of the watch, and if there is a package, bills, certificates, etc., accessories such as the purchase of the hand watch, it is the best, because the accessories will add points to the watch. Generally, the watch ** depends on the style, brand and popularity because if a watch is good in the second-hand watch line, **** will be good.
-
The Mido brand is pro-copy, and it is not too expensive to buy **, **** must be very cheap
Although you've only been wearing it for three months, there is no way, and I guess it's estimated that two or three folds off it is, specifically, you still consult a professional**, maybe you just bought** can be a little better, that Foyang can ask to see, if you feel that you can't accept it, then keep it and continue to use it, but it should be very cheap, after all, the brand decides**.
-
I don't know which Belen Seri you are, it's a bit expensive to buy for 8000.
If you can provide a counter warranty card or something, you can try to sell it at 20% off.
-
There are no fake watches made by Mido. However, there are fake watches on the market to prevent MIDO.
Here's how to tell if it's true or not
Mido watchmaking materials.
Mido uses only the finest materials from the Swiss watchmaking industry. Both the case and the strap are made of 316L high-quality stainless steel. Both gold plating and inter-gold products are treated with PVD (Vacuum Ion Plating) surface treatment technology.
Not only does this give the watch an attractive look, but its sturdiness is effective against scratches and corrosion. Mido is one of the few brands that offers titanium mechanical watches. This high-tech metal material is commonly used in aeronautics and surgery.
Compared with steel materials, it has the advantages of being lighter, corrosion-resistant, and hypoallergenic. The materials used in counterfeit watches are generally defective materials and can be easily distinguished.
Mido movement. Mido was originally made its own movements, which are very powerful, and all Mido movements have been rigorously inspected. The automatic movement features 3-position precision time, a high-quality Nivaflex No mainspring for long-lasting power, a finely engraved oscillating weight and an Incabloc shock absorber.
But Mido's movement is repolished, so the stability and accuracy of the watch will definitely be better than that of an unpolished movement. And if you look closely, many of the Mido are polished with a lot of patterns on the front plate, and then equipped with ruby bearings, blue steel screws or something, most of the Mido watches are designed with transparent case backs, which can observe the time. Mido offers chronometer-certified models in all collections.
The chronometer refers to the COSC (Swiss Official Watchmaking Bureau) that tests a mechanical movement in various directions and at different temperatures to ensure that it is accurate to keep time. The movements used in counterfeit watches are all defective and rarely polished because of the high cost.
Mido water resistance.
Mido watches are designed to be worn 24 hours a day, 1 day. The original Aquadura cork seals the crown system. Natural cork is embedded in the stem of the crown to ensure perfect waterproofing.
Special treatments allow the cork to remain moist and elastic all year round. Even when the crown is not fully pressed, it remains water-resistant. The Aquadura cork system is suitable for watches up to 50 meters and up to a depth of more than 100 meters, with a screw-down crown and back cover to resist water pressure and ensure water resistance.
Due to the excellent water-resistance of Mido, it has been won"Waterproof crown"reputation. The water-resistance performance can also distinguish the real from the fake.
-
There are fakes, but there are still relatively few high-quality imitations, and those fakes can be identified. The workmanship and cost performance are very good, and at the price of 3 8000, I think it is a good choice, and you can buy it with confidence.
-
There must be, as long as there is interest, there will be fake.
-
Yes, what's not fake now?
-
It is abnormal and belongs to the quality problem.
Error standard: In addition to the screen chip electronic watch, the watch that is always the same every second does not actually exist, whether it is a mechanical watch or a quartz watch has an error range, and this range varies from country to country.
Generally speaking, mechanical watches (including automatic watches) basically meet the standard as long as they are slow by no more than 30 seconds per day and no more than 30 seconds faster than when the wind is full.
Quartz watches, on the other hand, meet the standard if the battery is sufficient, and the speed does not exceed the second.
Therefore, whether it is a mechanical watch or a quartz watch, as long as the error is within the above two criteria, we can say that the watch is qualified. Otherwise, it means that there is a problem with the watch and it must be taken to the repair and maintenance department for adjustment.
-
Mido Watch Service Center: 400-659-0877
Mido MIDO belongs to a well-known watch brand, in the daily repair and maintenance do not try it easily, it is best to send it to a professional maintenance shop, so as not to outweigh the losses, then the following Mido MIDO after-sales center will tell you what small problems will occur in Mido MIDO brand watches.
First of all, there is the problem of power reserve, which is the so-called winding, if the Mido mechanical automatic watch is not worn for a long time, then there will be a state of stopping the hour hand, the power reserve will be exhausted, when rewinding, you must first loosen the crown, rotate the crown about 35 times, so that there will be enough power reserve to restore the function of the watch, except for the lack of power to wind, the rest of the time do not wind, in addition, in the process of winding, if you encounter the resistance of the crown, it means that the winding is good, do not twist violently to avoid damaging the mechanism.
-
Five common reasons for watch time error and watch time inaccuracy:
1) Insufficient power reserve: You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can replenish the power by manual winding, and then observe whether it continues to have the phenomenon of fast and slow.
2) Insufficient power: If the quartz watch suddenly finds that it is slow, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power.
3) Hit or hit: The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause the problem of running time. This is to be dealt with in a timely manner.
4) Need to maintain: The lack of oil in the movement or the wear and aging of internal parts may cause time problems, which need to be maintained, and need to be sent to the designated maintenance point for maintenance services.
5) In addition to the above common situations, the watch is affected by some ambient temperatures: if the hairspring of the watch is magnetized, the watch will not be accurate.
-
The authenticity of a mechanical watch is not judged by the fact that it is three minutes faster, and it is very normal for a men's watch from Switzerland to have an error of about 30 seconds a day. Is your watch fast three cents a month or a week or a day? If it's three minutes a day, you still have to go to the after-sales service designated by Mido to check it.
To popularize science again, the speed of a mechanical watch is related to the environment of daily wear, such as temperature, strength of winding, angle of usual placement, etc. It is said that when not in use, the front side and the back side are not the same, so it is more particular. It is related to the amount of exercise when you wear it, and it may be the relationship of magnetism, and you may be too strong on the wind.
-
It is normal for a mechanical watch to go fast, but it is not normal for a quartz watch to go fast!
-
Just go to the counter and adjust it, it's normal.
-
The reason why the watch goes fast:
1. If the wearer has a vigorous movement acting on the balance wheel, which aggravates the rotation amplitude of the balance wheel, it will cause the watch to swing and speed up the time.
2. The magnetization of movement parts is also one of the main reasons for the acceleration of the watch.
3. The watch has suffered a collision, and there will also be a problem, that is, the secondary outer ring of the hairspring may touch the outer pile of the hairspring, which will appear on the façade and in the dynamic form, which is also one of the fault problems that affect the walking at hand.
-
Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.
1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.
2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.
3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.
There will be after-sales ** on your warranty link, call after-sales ** to inquire about the after-sales address.
-
3 minutes faster per day? That's probably magnetic, go to the counter where you bought some and ask.
-
Summary. There is no quality problem with the goods, and once the warranty card is filled, it does not support return or exchange. When the merchant sells, it should also inform consumers that if there is no quality problem, once the warranty card is filled in, it cannot be returned or exchanged.
There is no quality problem with the goods, and once the warranty card is filled, it does not support return or exchange. Merchants should also inform consumers that if there is no quality problem, once the warranty card is filled, it is not possible to return or change the goods.
Mido was founded in 1918 by George Schaeren in Zurich, Switzerland. Today, Mido's corporate headquarters are located in the small town of Le Locle, in the heart of the Jura Mountains in Switzerland. The name Mido is derived from the Spanish word "yo mido", which means "I measure".
It is intended to create a watch that will be your close friend, and Mido's watchmaking philosophy is one that combines timeless design and practical functionality rather than following trends. The aim is to create a watch with high-quality materials, precise movements, and excellent waterproof properties that can be used for a long time. Mido is part of the Swatch Group, the world's largest manufacturer and distributor of watches.
The main repentance is distributed in Switzerland, France, Germany, Italy, the United States, the Virgin Islands, Thailand, Malaysia, and China.
Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons. >>>More
If a mechanical watch needs to be wound manually, so that it has to be operated almost every day, in the process of winding the mainspring, the parts are more stressed, and the wear and tear of the chronometer certification parts is relatively large, and the winding is prone to problems. >>>More
The mechanical watch is complex and high-grade, the leather is durable but the time error is larger, and the daily error is qualified in plus or minus 40 seconds, but it is generally not so much; Quartz watches are cheaper and accurate, but they require 2 or 3 years to change batteries. Within 1000 yuan, if you want to buy a mechanical watch, you can choose Seiko No. 5 series and Oriental Double Lions, which are cheap and durable, and the most cost-effective. If you want to buy a quartz watch, you should choose Casio, which has a stylish style and excellent quality. >>>More
Magnetism and electricity are both physical phenomena in nature, and where there is electricity, there is magnetism. In today's social life, electronic products are everywhere, therefore, there is a strong or weak magnetic field around us. Various types of permanent magnets are also widely used in electrical appliances, typically speakers and motors, and both magnets and DC magnetic fields can magnetize "hard magnetic" materials such as steel. >>>More
The main difference between a mechanical watch and a quartz watch is the movement. >>>More