The drum washing machine drains directly when the water is good?

If the drum washing machine is not discharged directly after the water is in, if it is discharged just after the water is in, it is possible that your drainage line is not completely closed, or there is a coin stuck in the pipe, resulting in no water storage.

If the water in your drum washing machine is discharged directly, it means that there is a problem with the drain valve inside, check the drain valve or just see if the relay in it will be damaged?

If there is a problem with the motherboard of the washing machine, you can try to replace the motherboard, or repair the motherboard, which can solve the current problem of the washing machine.

It may be a problem with the motherboard, under normal circumstances, he should run a program before draining, it should be drained before running the program, indicating that there is a problem with the motherboard.

When this happens when washing clothes, most of the time it is because the drain valve core of the drum washing machine is stuck by hard objects such as coins and buttons, resulting in the drain valve not closing tightly or cannot be closed. At this time, we need to take out the object that is stuck in the drain valve, and the specific operation is as follows:

1. Open the back cover of the washing machine, find the drain tractor, and use some force to use your hands to drain the water in the drum of the washing machine.

2. Wait until all the water in the barrel is drained, then put the washing machine horizontally, and there is a cover connected to the tractor at the bottom of the cylinder, and twist it in a counterclockwise direction.

3. After opening the lid of the twisting wheel, you can see that there is a stuff stuffed with a leather plug inside, force it out, and then put your fingers into it, you can touch the items inside, and then take out the objects with your fingers. At this time, the drain valve can be closed normally, and there will be no more drainage while the water is inflowing.

In addition, if the drain valve is normal, but this phenomenon still occurs, then you need to check the retractor mentioned above to see if the retractor is not retracted properly, and if so, return it manually.

If the above operations cannot solve this problem, it is possible that the computer board of the washing machine is faulty, and you need to contact the after-sales service personnel of the washing machine as soon as possible to replace the computer board.

There may be debris in the drain valve and corrugated hose, which is known to cause water leakage, and the following is the solution:

1. Use a screwdriver to open the back panel of the washing machine.

2. Carefully observe the internal drainage system of the washing machine.

3. Understand the drainage method of the washing machine.

4. Understand the structure of the drain valve. The drain valve is composed of a valve body and a valve core, and relies on the sealing of the valve core and the valve body to control whether the water is drained or stored.

5. After understanding the drainage method and drainage principle of the washing machine, let's start the operation. First, remove the drain bellows hose.

6. Disassemble the drain valve core, and carefully clean the drain valve core and the internal granular and flocculent matter (such as: artificial jewelry, cotton silk, buttons, etc.).

8. After the repair of Huiding is completed, assemble the back panel of the washing machine and complete it.

According to the manual, the drainage pipe needs to be hung 10cm high

1. Drain valve failure: The drain valve of the washing machine is stuck by foreign objects and the drain valve cannot be reset, or the rubber pad inside the drain valve is aging, etc., which will lead to the failure of the drain of the washing machine. We can use a screwdriver to remove the back cover of the washing machine, after finding the drain valve of the washing machine, remove the foreign matter in the drain valve, if the internal components of the drain valve are damaged, we can replace the drain valve.

2. Failure of water pressure air duct: If the water pressure air duct is not firmly installed or there are problems such as cracking, then the pressure to water level sensor cannot be provided, so there will be the problem of drainage after the washing machine enters the water. After removing the back cover of the washing machine, we found the transparent plastic pipe that connects to the water level, which is the water pressure air duct.

If there is a crack in the tube, we can remove it and replace it with a new one. If the tube connector is loose, we can reinstall it.

3. Failure of the drainage tractor: The failure of the drainage tractor, for example, the traction rod of the tractor cannot be returned to the position for sale, which will lead to the drainage of the washing machine after water ingress. You can remove the drain puller and install a new drain puller. File game teasing.

4. Water level sensor failure: The water level sensor is faulty, resulting in its inability to sense the water level Mozhou pressure, so there will be a problem of drainage after the washing machine enters the water. We removed the washing machine water temperature sensor and replaced it with a new one.

In general, the washing machine is guaranteed for 1 year, and the main components are guaranteed for 3 years. If there is a drainage and other failure of the washing machine, you can contact the after-sales maintenance personnel for maintenance. When repairing the washing machine, we need to cut off the power for repair.

On the instructions of the drum washing machine, there will be requirements for the installation of drain pipes. Moreover, on the back of the washing machine, there will be drain pipe bayonets, some of which can be pulled out, and some of which are fixed.

Since the drum washing machine drains water, it needs to pass through a drain pump, which is not originally sealed.

That's why there are detailed legends in the manual.

The drain pipe of the drum washing machine must be placed in an inverted U-shape, and the highest point is about 60cm from the ground.

If it is placed horizontally, there will be a phenomenon of water entering and draining from the upper side.

Explain that the washing machine is drained, if the end of the drain is too low, this situation will occur, the only way is to put the end of the drain too high.

If the pattern is normal, it is caused by a poor seal of the drain valve, damage or a faulty traction motor.

The drain valve is stuck and the closure is not tight.

It is a mechanical failure, so hurry up and find a technician to check it.