Where does the water go from the drain hole of the refrigerator, and where is the water coming out o

The condensate drain hole of the freezer compartment of the refrigerator is located in the lower rear part of the freezer compartment of the refrigerator. There is a small hole in the middle of the refrigerator from bottom to top 10cm-20cm, and there is a small filter plug at the condensate drainage hole, which should not be removed during the use of the refrigerator. So now the design will design a leak hole on the back of the refrigerator, which is the drain hole of the refrigerator, to let the condensate in the refrigerator drain out.

If you find that the refrigerator drains poorly, check the leak hole to see if it is blocked. However, when inspecting, the power supply should be cut off and then dredged with a thin wire. If the refrigerator drain hole is blocked, everyone should take out the foreign object at the entrance of the refrigerator drain hole.

First of all, you can use a cup to pour a small amount of water into the drain hole to see if the drain hole of the refrigerator is unobstructed. If not, the drain hole is blocked. You should first turn off the power of the refrigerator, and then connect it to the drain hole of the refrigerator with a soft copper wire.

Generally, when it grows to about a meter, it's basically fine. If you want to see if it's connected correctly, you can pour some water to check it.

The refrigerator is now an indispensable electrical appliance for every household, with the refrigerator we don't have to worry about our food spoiling because of the weather, and the refrigerator can also make a lot of delicious food, such as homemade ice cream, as well as iced sour plum soup, etc., but although the refrigerator is common, but everyone knows very little about the small knowledge of the refrigerator. So let's take a look at where the water in the refrigerator drain hole goes.

Product model: Midea refrigerator BCD-258WTPZM

There is generally a box on the top of the compressor of the refrigerator, and the drain hole of the refrigerator is discharged into the box above the refrigerator compressor.

The box is next to the compressor, when the water of the refrigerator drains the box through the drain hole, and then evaporates the water through the heat of the compressor so as not to fill the box and cause water leakage, so that you can do the purpose of circulation without pouring the water yourself.

Precautions for refrigerator use:

1. Frequently clean the dust on the back or bottom of the refrigerator condenser and compressor. Dust can be removed using a vacuum cleaner or brush. Be careful not to use a damp cloth to wipe dust off the refrigerator and compressor.

2. When the refrigerator is out of use for a long time, the power should be cut off first, all the food in the box should be taken out, the inside and outside of the box should be cleaned up, and the door of the box should be opened for several days to fully dry the box and dissipate the odor in the refrigerator.

3. Check the drain pipe. If the drain is clogged, the water will leak into the refrigerator. Poke the drain pipe with wire to remove the build-up on the drain.

4. Don't ignore the cleaning of the door seal strip, dilute the bleach with 10 times the water, moisten it with a toothbrush, and finally wash the bleach with water. The rubber strip is dirty and easy to age, which will affect the sealing of the refrigerator and increase power consumption.

5. Check the vibration, noise and temperature of the compressor. When touching the compressor shell during operation, there should be no obvious vibration, and the sound of the compressor starting should not be heard during the day.

6. Pay attention to check whether there are cracks in the power line to prevent leakage.

The drain holes of the direct-cooling refrigerator are all in the water tank under the back wall of the refrigerator, and the defrosting water flows through the drain pipe to the water box above the compressor below the back of the refrigerator, and then slowly evaporates through the high temperature generated when the compressor is working.

The outlet hole of the refrigerator drain hole is above the water tray above the compressor behind the refrigerator. The discharged water is evaporated on the tray using the heat of the compressor when it is working.

The refrigerator drain hole is under the back of the refrigerator, and you can see that there is a small hole of about one centimeter, and this small hole is the drain hole. The drain hole can be connected directly to the compressor of the refrigerator, and the water in the refrigerator will gradually flow from the compressor to the basin. When the compressor is running, the temperature gradually rises, and the water in the basin gradually increases.

The drain in the refrigerator has a small thin tube behind the refrigerator, which can be seen when the back cover of the refrigerator is opened. Small pores can be seen in the upper part of the compressor.

The location of the refrigerator drain hole is generally behind the second layer when refrigerating, and you can take out the partition of the refrigerator freezer compartment and you can see that there is a small hole.

"Drain location: The drain hole is on the back, and you can see a hole. The drain of the refrigerator is generally on the back of the refrigerator, which is easy to find, and you can see it the other way around.

What kind of refrigerator? The location of its outlet hole is different, and there is a similar plastic cover in the place where I find it, which is the outlet hole.

The drain hole in the refrigerator is located above the compressor at the back of the refrigerator.

The drain hole of the refrigerator is underneath the back of the refrigeratorYou can see that there is a small hole of about one centimeter, and this small hole is the drainage hole. The drain hole can be directly connected to the compressor of the refrigerator, and the water in the refrigerator will flow from the compressor to the basin, and then the temperature of the compressor will gradually increase during operation, so that the water inside will be slowly evaporated.

How to remove ice and frost from the refrigeratorWhen the refrigerator is powered off, pour about two-thirds of the hot water into the bowl at a temperature of about 70, and then put the hot water directly into the refrigerator. The use of hot water can avoid the deformation of the refrigerator from the refrigerator to the refrigerator wall, which can instantly rise from low temperatures. It only takes about 3 to 5 minutes for the frost on the fridge to start to melt, and by that time, you can flick it all off with your hand.

Do not directly use a sharp knife to shovel frost, not only may it be injured, but it may also cause damage to the refrigerator evaporator, if you have a de-icing shovel at home, you can use it. You can also use a hair dryer to turn on the hot air and blow it directly into the refrigerator, which can also quickly remove the frost.

The refrigerator drain hole is in the back wall of the refrigerator, and you can see it when you take out the contents of the refrigerator and remove the glass partition. The drainage hole should be inspected and cleaned at ordinary times, otherwise the stagnant water cannot be discharged, which will bring a lot of trouble to use. When clogged, use a cotton swab to pick out the dirt in the water outlet hole and rinse it.

Beat the family. <> the drainage hole of the refrigerator is generally in the back wall of the refrigerator, take out all the items in the refrigerator first, and then take out the glass partition, you can see a small hole in the back wall, this small hole is the drainage hole of the refrigerator. Drain holes are generally used to drain excess moisture from the refrigerator, so don't block it when putting things.

If you find that there is water in the refrigerator, it may be because the drainage hole in the refrigerator is blocked, resulting in excess water that cannot be discharged in time, and it needs to be cleaned and dredged before it can be used. First of all, wipe the water with a rag, and then use cotton swabs or chopsticks to get out the dirt in the water outlet hole, and clean it.

The drain hole in the refrigerator needs to be checked from time to time to prevent the drain hole from clogging and causing water accumulation. When the refrigerator has a lot of water and the temperature is set relatively low, it will cause the refrigerator compartment to freeze. In addition, in order to prevent water accumulation in the refrigerator, it is best to wipe off the remaining water before putting items in the refrigerator.

Move the refrigerator, and then remove the cover under the back of the refrigerator, so that you can see the water box on the compressor, pull it out, pour out the water and clean it, and install and reset.

Under the back of the refrigerator, on top of or next to the compressor.

The condensate drain hole in the refrigerator room is used to discharge the condensate generated during the use of the refrigerator, and the condensate is discharged to the condensate tray under the back of the refrigerator for temporary storage.

In the product instruction manual that comes with the refrigerator product manufacturer, there is a detailed description of the structure and location, and it is recommended to refer to these instructions.

Drain hole in the refrigerator First open the freezer compartment of the refrigerator, and then remove the items in the refrigerator, there is a small hole near the inner wall of the refrigerator, which is the drain hole in the refrigerator compartment. 2.Drain hole in the freezer The drain in the freezer compartment of the refrigerator is below the inside of the refrigerator, first unplug the socket of the refrigerator; Remove all partitions of the freezer compartment of the refrigerator; In the freezer compartment of the refrigerator, you can find a buckle, pull the buckle out, and then you can see a small hole, which is the freezer drain.

Usually above the compressor at the back of the refrigerator, the discharged water is connected by a water tray.

The drain holes in the refrigerator are used to drain the moisture generated inside the refrigerator and the melted water produced when the refrigerator is defrosted. This water flows out of the refrigerator through the drain hole and into a place called a water storage tray or drain pan.

The water tray is usually located at the bottom or back of the refrigerator. It is a shallow, wide plate that can be bent and balanced to hold a certain amount of water. When the moisture generated inside the refrigerator or melted water flows through the drain hole into the water storage tray, they can accumulate in the tray.

Next, the water flows out of the reservoir through a small buried pipe or a nearby piping system. This pipe is usually connected to the compressor or evaporator of the refrigerator. The heat from the compressor or evaporator helps to evaporate the effluent or melted water.

As a result, we don't usually see water coming out of the outside of the refrigerator.

It is important to note that the drainage system of the refrigerator needs to be cleaned and maintained regularly. If the drain hole is blocked, the water flow will not be able to drain smoothly and may cause water to overflow or odors to develop inside the refrigerator. Therefore, it is advisable to regularly inspect and clean the drain holes and water storage tray of the refrigerator.

We hope that the answers on the accompaniment can meet your needs, if you have any other questions, please feel free to ask.

Straighten the water pipe and go all the way to the water box above the front shrinkage machine under the back of the refrigerator.

The drain hole in the refrigerator drains the water to the compressor and dissipates the heat, which is really helping you look forward to it.

In the refrigerator compartment, you can see a small hole, just below the back wall, and this drain hole flows directly into the compressor at the back. There is a water box on the top of the compressor, and the water will eventually flow into this box, and then when the compressor is running, it will slowly evaporate at high temperature, which will not affect the use of the refrigerator and will not accumulate on the inner wall of the refrigerator.

However, if there is a drain hole that cannot be drained for a long time, it will lead to an increase in humidity in the refrigerator compartment and the growth of bacteria. It will also lead to an increase in water vapor, which will cause the four walls to freeze.

Clean the drain holes of the refrigerator.

1. Before cleaning, you first need to turn off the power and unplug the power socket. Then clean out all the contents of the refrigerator, then find the drain at the bottom of the refrigerator compartment and remove the back cover. When you see that there is a drainage groove, prepare a plastic pipe, extend it into the drainage hole, the diameter is slightly smaller, go deep, and poke it back and forth a few more times, you can clean and dredge.

2. Finally, we add the back power lid to cover, clean up the inside of the refrigerator, put the food back in, plug it in again, and it can be used.

Generally, the drain hole of the refrigerator is drained into the "box" above the refrigerator compressor, and there is generally a box on the compressor of the refrigerator. The box is next to the compressor, when the water of the refrigerator drains the box through the drainage hole, and then evaporates the jujube water through the heat of the compressor, so as not to fill the box and cause the "leakage" phenomenon, so that you can do the purpose of circulation without pouring the water yourself.

Dust from the back or bottom of the refrigerator condenser and compressor needs to be cleaned from time to time. Dust can be removed using a vacuum cleaner or brush. Be careful not to use a damp cloth to wipe dust off the refrigerator and compressor.

If the refrigerator is out of use for a long time, you should first cut off the power supply, take out all the food in the box, clean up the inside and outside of the box, and open the door for a few days to fully dry the box and dissipate the odor in the refrigerator.

When cleaning the refrigerator, it is necessary to clean the door seal strip as well, and you can use bleaching powder to clean it. The rubber strip is dirty and easy to age, which will affect the sealing of the refrigerator and increase power consumption.

When carrying the refrigerator, you need to unplug the power supply, take out all the food in the refrigerator, fix the moving parts such as the shelves and drawers in the refrigerator with tape, close the refrigerator door tightly, and fix it with tape to avoid being opened when moving.