How to solve the problem that the washing machine does not store water and drains all the time?

When encountering this phenomenon, directly check the drainage system of the washing machine, generally the drainage system is faulty, causing the washing machine to be drained all the time, no matter how much water enters the water inlet pipe, it will eventually be discharged from the drainage pipe, check whether the drainage valve of the washing machine has been open, if so, just turn off the drainage valve manually. However, if there are frequent cases where the drain valve cannot close automatically, you need to find a maintenance person to replace a new drain valve. In addition, the following aspects are investigated:

1. Check again whether the drain valve of the washing machine is stuck by foreign objects, resulting in the drain valve not being able to close normally or not being able to close tightly, and the washing machine will flow out from here after the water enters. At this point, cleaning up what is stuck in the drain valve will solve the problem. 2. You also need to check whether the drain valve of the washing machine is not installed properly, and the phenomenon of displacement has occurred, which will also cause the water entering the washing machine barrel to leak out from here.

3. Finally, check whether the computer board of the washing machine is faulty, resulting in the wrong washing machine instruction, if so, directly replace the new computer board, and this problem can be solved.

The washing machine does not store water and has been draining the water to check the method: 1. Check whether there are foreign objects (coins, brooches, buttons, etc.) stuck in the drain valve core, resulting in the drain valve core cannot be returned to the position and cannot turn off the water, and the foreign body needs to be removed. 2. The water level switch or water level sensor is faulty, and the water level pressure cannot be sensed, resulting in continuous drainage, and the water level switch or water level sensor is replaced.

1. There is a foreign body in the drain valve: if the drain valve of the washing machine is stuck by a foreign object, then when it is running, the drain valve core cannot be reset, resulting in the phenomenon of no water storage. For this kind of key squeeze situation, first turn off the water inlet switch of the washing machine, and then clean the foreign matter in the drain valve area.

2. Failure of drainage tractor: When the drainage tractor fails, the washing machine will also have the phenomenon of draining water without storing water. Because the drain cable of the washing machine has failed, there is no way to control the drainage.

At this time, it is necessary to purchase a new type of drain tractor, and then replace it to use.

3. Water level switch or water level sensor failure: In the process of using the washing machine, if the water level switch or sensor fails, then it will not be able to sense the pressure of the water level in the barrel, so it will cause the phenomenon of draining water without storing water.

4. Hydraulic trachea rupture: When the hydraulic trachea of the washing machine ruptures and shouts the mountain falls off, it will also cause it to drain without storing water. If it just falls off, just ask a professional to reset it, and if it breaks, you need to replace it with a new hydrostatic air duct.

1. If the water has been drained but the motor does not rotate, see if it rings after timing. If it rings, then the belt on the motor has slipped. If it doesn't ring, it may be that the motor itself is broken, or the power supply is aging and the wire is broken.

2. Check that the drainage tractor (drainage motor) is faulty, and the drainage cable does not return, resulting in drainage while entering the water, and the solution is to replace the drainage tractor.

3. The water seal in the drainage pipe is not tightly sealed, resulting in water leakage. It is possible that the coin is stuck in the drain pipe, causing the drain valve core to not return to its position and cannot close the water to drain the water while entering the water, open the back cover, take out the circlip, pull out the drain pipe, and reach into the drain pipe with your hand to check if there is a foreign object stuck.

4. It is also possible that the water seal is damaged or the valve spring of the water seal is broken, if this is the case, the only way to change the drain valve is to replace it.

5. Drain water while entering the water, first check whether the drainage pipe is placed too low (not less than, and then check whether the drainage pipe mouth is inserted into the floor drain. If not, see if the water level is too high to submerge the glass. No, adjust the water level switch or solenoid valve or drain pump plug line.

6. Check the failure of the water level switch or water level sensor, the water level pressure cannot be sensed, resulting in drainage while entering the water, and the solution is to replace the water level switch or water level sensor.

7. Check that the water pressure air duct is ruptured or loose, and the pressure to water level switch or water level sensor cannot be provided, resulting in water inlet and drainage, and the solution is to adjust and replace the water pressure air duct.

How to repair the washing machine without water storage and drainage.

1.If there is a large foreign object in the spool of the drain valve of the washing machine, it will jam the drain valve spool and cause it to be unable to return to its original position, so that the water inlet and drain of the washing machine will occur at the same time. In this case, it is necessary to close the inlet valve of the washing machine and remove the odor stuck to the valve core before it can be used normally.

2.If there is a problem with the washing machine drain traction equipment, the drain cable cannot be returned to its original position, resulting in water ingress and drainage at the same time. At this time, it is necessary to repair the damaged drain tractor of the washing machine in time.

If the damage is significant, the tractor needs to be replaced. 3.If there is an abnormality in the water level switch or sensing device inside the washing machine, then after the water enters, the pressure generated by the water level cannot be felt, so the water enters and exits at the same time, and the water will not be stored.

For this phenomenon, what we need to do is to detect whether the water level switch or sensor is damaged. Just remove it and replace it with a new one. 4.

If the water pressure air duct inside the washing machine is damaged or loose, it will not be able to provide the required pressure to the water level switch, resulting in no water storage in the washing machine. If there is a problem with the water pressure airway, if it is loose, tighten it and you can use it. If it is damaged, it needs to be disassembled, and then the hydraulic airway of the same model is selected for replacement, and it can be used normally.

The washing machine does not store water and keeps draining the water for the following reasons:1. There is a foreign body in the drain valve.

When a large piece of foreign matter is stuck in the drain valve core of the washing machine, the drain valve core cannot return to its original position, so it will not be able to control the water and drain the water while entering the water.

2. Failure of drainage tractor.

If the drain tractor of the washing machine fails, the drain cable will not return, and the water will drain when the water is ingress.

3. It may be the water level sensor of the washing machine and the computer version is faulty. <>Solution1. If there is a foreign body in the drain valve, in this case, the water inlet switch should be turned off first, and the foreign matter in the drain valve should be taken out.

2. If it is a sensor or computer version failure, it is necessary to repair the corresponding parts to solve it.

3. If the drain tractor is faulty, it is necessary to replace the drain tractor of the washing machine in time or in time.

Hello, if the washing machine does not store water and keeps draining, there may be the following reasons for failure:1Washing machine inlet line blocked:

There will be a filter near the inlet of the inlet line, and cleaning the filter may solve the problem. Brother Lee 2Washing machine inlet valve failure:

The washing machine's inlet valve is faulty and needs to be replaced. 3.Washing machine water level switch malfunction:

The water level switch may be deviated, resulting in the dust washing machine being unable to judge the water level, and the water level switch needs to be replaced. 4.Washing machine control panel malfunction:

The control panel of the washing machine may malfunction, resulting in the washing machine being unable to control water intake, drainage, and other operations, and the control board needs to be replaced. It is recommended that you contact a maintenance person for inspection and repair.

Hello dear, <>

What should I do if the washing machine does not store water and keeps draining 1. It is possible that the drain valve of the washing machine has a foreign object stuck in the switch, resulting in the drain valve being closed without noisy sail method to drain the water, and the foreign matter at the core mouth of the drain valve can be solved by cleaning it; 2. It may be that the drain valve of the washing machine is out of order, resulting in the drain valve being unable to close and draining, and the drain valve needs to be replaced; 3. It may be that the water level sensor of the washing machine and the computer version are faulty, and the corresponding parts need to be repaired to solve it.