-
At the same time, the reason for the water inlet and drainage should be that the drain valve of the washing machine is not closed or closed tightly, or there are foreign objects in the drain valve, resulting in the valve core is not tightly closed. The way is to disassemble the drain valve for inspection and cleaning, if you are not good at dealing with it, you need to contact the after-sales service department of the washing machine, inform the model, and ask the professional master to carry out maintenance and inspection, and troubleshoot.
-
Hello, the washing machine drains as soon as the water enters, first check the button, the one that controls the drain valve is not faulty, and then the other is to check whether the solenoid valve is stuck or not, and then the solenoid valve is not bad and then hello, the washing machine drains as soon as the water enters, first check the control drain button, whether there is a fault, and then check whether the drain solenoid valve is faulty, and there is a check if the solenoid valve is stuck, or the closure is not strict. It is best to find relevant maintenance personnel for inspection and maintenance.
-
What should I do if the washing machine drains water while it is flooding? It can be done in 3 minutes, and family men must learn.
-
Check first to see if there are any foreign objects, such as coins, brooches, buttons and other small objects, stuck in the drain valve core, resulting in the water valve core can not return to the position and can not turn off the water, open the internal machine, see if the internal spring is stuck, if there is stuck, it should be replaced.
If the drainage motor is faulty, and the drainage cable does not return to its position, resulting in drainage while entering the water, you can replace the drainage tractor to solve the problem.
If the water level switch or water level sensor is faulty, and the water level pressure cannot be sensed, it is enough to replace the water level switch or water level sensor.
As soon as the water enters the drain, the repair method:
Pull the washing machine out of the open space, disassemble the cover plate at the back, there are only screws on both sides, twist it to take it out, and then you can take the cover out on it.
Now let's see if there is any blockage here, twist the iron ring and pull it back, and then slowly move the outlet pipe back, and see if it is blocked here.
Then use a tool to twist the screw and take out the piston rod, disassemble the piston rod and stand up the washing machine, and then put it on its side to take out coins and other things, or you can reach in to see if there are other things.
Then in reverse order, after assembling it, you can do it, and you need to unplug the power supply to disassemble the washing machine.
-
In the case of power failure, check whether there are any foreign objects (coins, brooches, buttons, etc.) stuck in the drain valve core, resulting in the drain valve core not returning to its position and not being able to close the water and drain the water at the water inlet. Solution: You can see that the internal spring is stuck, if it is stuck, we have to replace it.
or remove the foreign body.
Check that the drain tractor (drain motor) is faulty, and the drain cable does not return to its position, resulting in drainage while water is ingress. Solution: Replace the drain tractor.
Check that the water level switch or water level sensor is faulty, and the water level pressure cannot be sensed, resulting in water discharge while entering the water. Solution: Replace the water level switch or water level sensor.
Precautions for the use of washing machines.
After each washing, use a dry cloth to dry the stagnant water and water droplets inside and outside the washing machine, restore the knobs and buttons on the operation panel, and place them in a dry and ventilated place.
Before washing, you should carefully check the label on the garment to see if it can be washed, ironed, etc., and choose the corresponding washing program according to the texture of the garment, such as cotton, chemical fiber, wool, etc.
When the dehydration is unbalanced, the computerized automatic washing machine can be corrected for dehydration imbalance, if the imbalance problem is not solved after 2 corrections, it will stop and alarm, at this time the cover should be opened, put the clothes on the side evenly, and then close the cover, press the start pause button.
The above content refers to Encyclopedia - Washing Machine.
Encyclopedia - Washing machine failure maintenance guidance throughout the process.
-
1. First of all, check whether the drain valve core is stuck in the power-off state, you can see whether the valve core rod is in place, otherwise the internal spring may be stuck, at this time, the valve cover should be unscrewed, check that there are foreign objects stuck or damaged, and should be overhauled or replaced. 2. If the drain valve is normal, check whether the drawbar of the tractor is in place, whether the drawbar is flexible to pull and return by hand, if there is a stuck phenomenon, it means that the inside of the tractor has been damaged and should be overhauled or replaced. 3. If the retractor is normal, the retractor has also moved in the state of water inlet when energized, and shakes the drain valve core for drainage, which means that the computer board program has been disordered and the computer board should be replaced.
-
Summary. 1. The spring inside the drain valve core of the drain valve is stuck by a foreign object, or it has been damaged, you need to disconnect the power supply of the washing machine first, and then unscrew the valve cover of the drain valve to dredge or replace it. 2. Find the tractor of the washing machine, pull the towbar of the tractor by hand to see if the movement is flexible, if the towbar is stuck, it means that the tractor has been damaged, in this case, it needs to be overhauled, or directly replace a new tractor.
3. If the tractor is normal, it may be because the computer version of the washing machine is out of order, in this case, you can only replace a new computer board.
1. The spring inside the drain valve core of the drain valve is washed by a foreign body, or it has been damaged, so you need to disconnect the power supply of the washing machine first, and then unscrew the valve cover of the drain valve to dredge or replace it. 2. Find the tractor of the washing machine, pull the traction bar of the tractor by hand to see if it is flexible, if the tow bar is stuck, it means that the tractor has been damaged, and it needs to be overhauled in this stupid situation, or directly replace it with a new tractor. 3. If the tractor is normal, it may be because the computer version of the washing machine is out of order, in this case, you can only replace a new computer board.
How to repair the washing machine directly after the water enters the water? 1. First cut off the power supply, check whether the spine of the drain valve is stuck in the power-off state, and then see whether the position of the valve core rod is in place, it is very likely that the internal spring is stuck. In this case, we should unscrew the valve cover and check whether there is something stuck in it or if there is a part damaged, if something is stuck, just take it out, if there is a part that is broken, just replace it.
2. If the drain valve is normal, then check whether the tow bar of the tractor is normal. You can directly pull the towbar back and forth with your hand to see if it is flexible to follow the movement, whether the internal spring is elastic enough, and whether it can open the drainage core. If there is a situation where it is stuck or cannot be opened, it means that the inside of the retractor is damaged and the retractor needs to be replaced.
3. If the retractor is normal, you can check whether the retractor has action to shake the drain valve for drainage in the case of power and water intake, if there is a description of the program of the computer board, the computer motherboard should be replaced. 4. It may also be the problem of the water level switch or the pressure that cannot sense the water level, and the failure of the water level sensor leads to drainage while entering the water. This can be solved by replacing the water level switch or the water level sensor.
5. The rupture or loosening of the water pressure conduit will also lead to failure, because there is no way to provide a pressure to water level switch or water level sensor. It can be solved by adjusting or replacing the water pressure air duct. 6. There is also to check whether the central axis exists.
-
1. The washing machine normally drains water while entering the water.
The upper rinse function of a fully automatic washing machine refers to overflow rinsing.
While the washing machine is rinsing the washing machine, the water is stirred by the rotation of the roller, and the water flows out of the upper overflow and discharges the washing machine through the drain pipe.
The purpose of this is to remove the foam from the laundry from the upper overflow.
It can reduce the number of rinses and save water.
2. The abnormal drainage of the washing machine while entering the water is a failure of the drain valve.
1.When the automatic washing machine starts to fill water, it drains water while entering the water; At this time, the drain valve of the washing machine is not closed properly, and the drainage system of the washing machine has a problem or malfunction.
2.At this time, you can check whether the retractor or solenoid of the drain valve of the washing machine is in a state of power loss and release.
3.In addition, in the drain valve of the washing machine, there are foreign objects or washing slag between the drain valve body and the drain valve core, so that the drain valve core is not closed tightly.
4.It is recommended to contact the after-sales service department of the washing machine according to the model and brand of the washing machine for maintenance and clean the drain valve.
-
The washing machine keeps draining due to the fact that the drain threshold is not closed properly or the water level switch is damaged. 1. If there is drainage from the beginning of the water intake: 1. The foreign body is stuck in the drainage solenoid valve, resulting in poor closing.
Such as coins, women's hair pins, and the like. It is necessary to disassemble the back cover of the washing machine, lay the washing machine flat, dial out the drain pipe, check the rubber piston of the solenoid valve, and take out the foreign matter (the new machine is more common) 2. The sealing ring of the solenoid drain valve is deformed and the sealing ring is replaced (the old washing machine is more common) 3. The solenoid valve is faulty and needs to be replaced or repaired, please make an appointment with a maintenance personnel to deal with it. 2. If the water level reaches the set water level before the drainage begins
The water level switch is broken and needs to be replaced or repaired. It is necessary to disassemble the upper cover of the washing machine, remove the water level switch for inspection, and it is recommended to make an appointment for maintenance personnel to come to check. ~
Causes and solutions for automatic draining of the washing machine as soon as the water enters: >>>More
Recently, I have met a lot of customers who are asking, if it is a toilet and a bar counter, can it be solved with a small sewage lifter? >>>More
You are suitable for washing machines with upper drain (drum washing machines), this kind of small wave wheel washing machine. >>>More
Causes and treatment methods of washing machine inlet pipe leakage: >>>More
The washing machine wheel slipped for two reasons:
1. The pulley has been used for a long time, the wear is large, the friction is reduced, and if it is used frequently, the perimeter of the pulley tension will increase, and it is necessary to replace the new pulley. >>>More