When using a fully automatic washing machine, how should I drain the water manually?

The manual drainage method of the fully automatic washing machine selects a single dewatering gear. Generally, single dehydration must first be drained, so open the single dewatering program and start the dehydration process after the water is emptied, with a certain interval. As long as the node is controlled, the machine can be stopped.

Even if you start dehydrating, there is nothing wrong with it, the rotational speed is often low and it doesn't hurt to stop the machine. Unplug the washing machine and use a screwdriver.

Remove the back of the washing machine and find the clutch.

Then we pushed the clutch handle open, drained the water from the washing machine, and finally installed it on the back of the washing machine. When we wash the washing machine, we can press the spin button of the washing machine to drain the water.

<> can also open the drain valve by pulling the string underneath the washing machine, and of course some washing machines have a baffle seal underneath. If the Control Panel.

It can be restarted, just press it in the laundry program"Dehydration"button, and the washing machine will automatically drain water when you press the start button. Before using it, we should make sure that the washing machine is stable and firm. If the installation is uneven, it will produce a lot of noise and shaking during use, which will affect its normal use and shorten its service life.

If the washing machine is near a window, a curtain should be placed next to the window to avoid direct sunlight and prevent damage to the washing machine parts.

Before washing clothes, try to remove dust and sand from the clothes before putting them in the laundry bucket. If you don't clean up debris, coins, and other debris, it is easy to clog or damage the inner cylinder when washing clothes. After the clothes are washed, take out the clothes, do not close the lid immediately, be sure to wait for the water in the bucket to dry before closing the lid, which can prevent some bacteria in the bucket from growing.

Do a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me more, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you.

First of all, we need to open the back of the washing machine, and secondly, we should also click on the drain function, and we must open the drain outlet, so that it can play a drain role.

Automatic drainage, this does not need to be manually drained, as long as it is washed and automatically drained.

The automatic washing machine should not be drained manually, and it is enough to ensure that the wiring of the washing machine is normal.

Fully automatic washing machines, washing machines will have this kind of small buttons on the washing machine, and there will be an operation step of selecting drainage on the buttons. When you're done washing your clothes, put them in the washing machine, then find the drain button, and click Confirm to start.

The best way to automatically drain water is to get a pipeline, and then wash the clothes at the same time, and then quickly drain the water out, which is such a method, very simple.

When the washing machine is spinning and throwing water, you can put the water pipe in a basin. This way, all the water inside will remain in the bucket you prepared in advance, and there will be no wasted water. It can also be reused.

At this time, you can put down some of the drain pipes of the washing machine, and you can also put them directly into the floor drain, and finally press the drain button.

Find the spin button on the control panel, turn on the power and start the machine, and then put the water hose up.

The method of draining the automatic washing machine is actually relatively simple, and the specific method is as follows:

1. If the automatic washing machine is drained, first of all, make sure that the washing machine is in a power-on state, press the power button of the washing machine, and the "drop" sounds, and it is on, it means that it is energized.

2. Then press the "Power" button to keep the washing machine in a state of preparation.

3. Then in the program column, find "dehydration", and then press the program button, when the button lights up, the washing machine will start working.

4. Finally, when the "dehydration" lights up, it's OK, click the start button, and the washing machine will start draining.

There are many reasons for the failure of the washing machine not draining, and the solution is relatively simple, as follows:

1. First of all, you can start to check the drainage pipe;

2. Make sure that the drainage pipe has been put down;

3. Check whether the drainage pipe is deformed or twisted;

4. Make sure that the drain pipe is unblocked and there is no foreign object blocking the drain pipe.

The tools that need to be prepared are as follows: washing machine, socket.

1. First of all, ensure that the various connecting wires of the washing machine are normal and can be used, the washing machine should first ensure that the power is on, you can press the power button of the washing machine to try it, "drop" sounds, and it is lit, it means that the power is on.

2. Press the "power" button to keep the washing machine in a state of preparation, and it should be noted here that there should be no water on the surface of the washing machine, otherwise it will damage the electronic circuits inside.

3. Find the "program" column, because different washing machines, the program is in different positions, but the handwriting reminder is the same.

4. In the program column, find "dehydration", and then press the program button, when the "dehydration" lights up, it's OK, don't press the program button.

5. Press the start button to pause, the washing machine is not rotating at this time, so press it to start. Let's press it, and that's when the washing machine starts draining.

6. When the water in the washing machine is drained, the washing machine will pause for about five seconds, at this time press the start pause button, at this time the washing machine will stop working, and the drainage will be completed. Finally, press the "Power" key to turn off the power.

<> how to drain the automatic washing machine: 1. First of all, find its drainage pipe and put the drainage pipe into the sewer pipe, so that the waste water can be discharged smoothly; 2. Secondly, plug in the power cord and select the function of dehydration according to the laundry needs; 3. Finally, when the indicator light turns on, select the start button, and the automatic washing machine will start draining.

This answer is suitable for most washing machine models of Haier EG10014B39GU1 &&& Little Swan TG100V88WMUIADY5 and other brands.

Hello dear, how to manually drain the automatic washing machine You can choose the last dehydration program, and then press the start to release the water, if the control is broken, then you can only open the drain valve by pulling the drain valve under the washing machine, but some washing machines are sealed with a baffle below. If the control panel can be restarted, it will only be called up in the laundry program"Dehydration", press start and the washing machine will drain automatically. If you can't, you can drain the water manually and just take out the clothes.

It is recommended to change the computer to a crash board. You can put the water in the first place, and then only turn it out in the laundry program"Dehydration", press start and the washing machine will drain automatically. Step Method:

1. Automatic computer washing machine dehydration (automatic or manual adjustment of the washing machine button to), then the dehydration indicator flashes, then the computer controls the power supply and drainage valve, and then the drain valve begins to drain, and then the drain valve drives the clutch to convert (release the clutch clutch spring) at the same time as draining 2. After about 3 minutes, the computer defaults to the water release time, and then the computer detects the opening and closing signal of the washing machine panel door. (It is not closed, and the alarm prompt is indicated by beeping "beep".) Stop dehydration) 3, to the washing machine motor forward power supply, then the washing machine rotates, and then through the belt to drive the clutch pulley, and then the clutch core rotates to drive the released clutch spring to hold 4, the washing machine barrel rotates for about 30s to stop branching, and then the computer controls the repeated machine motor power supply 30s to stop, and then in the power supply 2 times.

Adjust the bucket in the washing machine to evenly pack. 5. The continuous power supply motor is dehydrated for about 3 minutes. Stop, and then during the rotation of the inner barrel, the computer has been detecting the state of the door switch on, (artificially opening the washing machine panel door or the contact is not good, the inner barrel shaking amplitude is too large and touches the door switch will stop dehydration.)

When the door opens and closes the stupid pants during the rotation of the inner barrel more than 3 times, enter the rinsing program. From the water first, wash, then the buzzer beeps. (Prompt dehydration complete), then the washing machine only the panel indicator light is on.

We unplug the washing machine, use a screwdriver to remove the back plate of the washing machine and find the clutch, then we push the clutch handle to drain the water in the washing machine section, and finally install the back plate of the washing machine. When we wash the washing machine, we can press the detached water button of the washing machine to drain the water.