How to raise the roses I just bought, and how to raise the newly bought potted roses?

Hello! <>

Rose Planting Techniques:

1. Appropriate storage temperature: The suitable temperature of roses is about 20 to 30 degrees, so it should be stored at a suitable temperature to be conducive to the growth of roses.

2. Water and fertilizer management: water and fertilizer are directly related to the yield of roses, at least three times fertilizer, germination fertilizer, mainly nitrogen fertilizer, post-flowering fertilizer, after the end of flowering, mainly nitrogen fertilizer, with the application of phosphorus and potassium fertilizer, autumn base fertilizer, after the fall of leaves to the soil before freezing, early application is appropriate, mainly organic fertilizer.

3. Weeding frequently: When the soil of roses reaches a certain time, remember to weed more roses, and carry out deep ploughing and expansion of holes before freezing every autumn, and fertilization at the same time.

4. Pruning: From late April to early May every year, prune the dead old branches or diseased branches and remove them from the garden. Cut the 7 to 8-year-old branches 20 to 30 cm above the ground or dig out the whole branches, cut off the old branches and diseased branches, and plant them separately to avoid replanting.

5. Prevent insect pests: There are many pests that harm roses, so it is necessary to strengthen the treatment of pests and spray roses once in a while.

2. Precautions for planting potted roses:

1. When the roses are just planted in the pot, they should not be placed in the sun, but they should also be placed in a place with good light.

2. Do not use fertilizer in the soil when you are just planted, you need to wait for the seedlings to come, and after the branches and leaves grow some, then gradually use fertilizer. Strictly follow the principle of thin fertilizer and diligent application.

3. When the seedlings are planted, the first watering must be done more to prevent the watering above the soil from being wet and the soil below from being dry.

1. Branch breaking method.

For some brittle branches, the flower branches used for vase insertion are selected, and they should be broken by hand, so that the flower stalk is not stressed, the catheter remains normal, and it is easy to absorb water.

2. Liquid immersion method.

Before inserting the cut branches into the vase, the ends of the cut branches are immersed in the used waste developer for half an hour, so that the flowering period of the flower branches can be extended.

3. Salt water or sugar water cultivation method.

Add a little salt or sugar to the water of raising flowers, you can also crush the incision when the flower branches are just cut, and rub it with salt, the effect is better than the hot scalding method, the sugar can make the flowers bright and lasting, however, the flower branches with buds are not suitable for soaking in salt water, otherwise the flowers will be difficult to open.

1. The newly bought potted roses must not be anxiously repotted. The roses are a little unsuitable for the new environment, and they are still blooming, which consumes a lot.

3. Potted roses are very fond of light. If it is kept indoors for a long time and does not get enough light, the rose leaves do not have to photosynthesize, so the growth of the rose pot will not be good, and the rose buds will be reduced.

4. In order to allow the rose potted plants to adapt to the new environment as soon as possible, you can first give the rose potted plants half a day. The relatively soft light in the morning is more suitable for rose pots, and at the same time, pay attention to maintaining the ventilation of the environment.

5. One of the reasons for the wilting of potted roses may be improper watering. Although potted roses are small, flowering roses require more water. Watering potted roses should be dry and wet alternately, and the potting soil should not be watered unless it is dry.

When the potting soil of the rose pot is dry, it should be watered in time, and the watering should be thorough.

Do not water half-cut or ration watering. Be sure to pour the potting soil until a large amount of water comes out before stopping.

6. Usually you can spray more to the surrounding environment to increase the air humidity in the environment. Roses like a humid environment, and it is necessary to increase the air humidity appropriately, which can also help the potted small roses adapt to the new environment as soon as possible, and avoid the accumulation of water in the roses.

7. When the rose pot has finished flowering, the rose can be pruned. Cut off the residual flowers so as not to consume nutrients. If you want to change the pot, you can get started.

When repotting, try to avoid damaging the root system. Do not divide the seedlings when changing pots, and you can wait until autumn or early spring to do so.

8. After changing the pot, the seedlings should be slowed down for about 7 days, and then start topdressing, which can help the rose seedlings recover their strength as soon as possible. If the rose potted plant has grown buds, it is recommended to remove them in time, and at this time the seedlings are mainly raised. Allow the root system to grow more so that it is ready for seedling.

Potted Rose Care:

1. Choose a pot. Potted roses need to be potted with good drainage capacity and bottom holes. Such a pot is not prone to stagnant water, which can reduce the chance of root rot. In addition, if you are raising seedlings, you need to use a larger pot.

Second, flower soil. It is best to use flower soil with high nutrient content and good drainage capacity. If the soil used is very clay and does not drain enough, it may cause root rot and make it difficult to flower.

3. Moisture. It prefers moist growing conditions, but is more resistant to waterlogging. Watering it should be carried out according to the condition of the flowering soil, and then watered when the soil is dry. If the soil doesn't show signs of drying out, don't water it yet.

Beautiful roses at home add a lot of color to the interior, but how to raise potted roses at home?

Newly purchased potted roses need to be treated slowly, placed in a cool and ventilated place first, and then resumed management after they have adapted to the new environment. It likes light, and after adapting, it needs to move to a place with good light and let it bask in the sun more. Water in moderation and keep the soil slightly wet during the growing season, but not waterlogged.

It likes a warm environment, high temperature resistance and cold resistance are not high, and attention should be paid to controlling high and low temperatures in summer and winter. In addition, if the potting soil is not suitable, it is best to change the pot after resuming growth.

The maintenance method of roses is as follows:

1. Water inserted roses. 1.Cut obliquely with a sharp knife and cut off the end of the stem about 2 cm to make the incision smooth and increase the water absorption area.

2.Peel off the end skin or cut it into a cross incision, and if it is too thick, the end can be broken to increase the water absorption area. 3.

Use clean water and vases. 4.Start treatment with warm water.

5.Add a fresh-keeping agent. 6.

Remove the branches and leaves under the liquid surface. 7.If the flowers are wilting, you can wrap them in wet newspaper for 2 to 3 hours.

8.Avoid high temperature and dryness in the place where the flowers are placed, especially in direct sunlight. 9.

Avoid placing flowers with fruits such as apples, pineapples, and bananas.

2. Water treatment method. 1.Immersion method:

Roses will wilt when exposed to high temperatures, so they can be immersed in water with their stems and leaves to increase the water absorption area. 2.Water Injection Method:

It is easy to lose water in the rose stalk, so you can pour water into the stalk with a water gun or syringe, and then plug it with cotton to prolong the flowering period. 3.Reverse Water Method:

Take the flowers upside down and water them in reverse direction with a watering can, and the water will flow into the flower stems and flow through the stems and leaves to increase the water absorption area.

3. Chemical treatment. 1.Apply salt, alcohol, alum, mint, oil, and other items to the incision that can inhibit the growth of bacteria and prolong the life of the flowers. 2.Add lead to the water and add acetic acid, citric acid or bleach to inhibit the growth of bacteria, but the concentration should not be too high.

Fourth, heat treatment method. 1.Hot Water Method:

Wrap the flowers in newspaper and soak them in hot water for about 30 seconds, which can kill some bacteria and prolong the flowering period. 2.Cautery:

The secretion of mucus from the flower will block the incision, which is easy to cause poor water absorption, and the incision can be burned with fire until the incision turns black and will not secrete mucus.

Roses bought from florists are cut flowers, which can only prolong the viewing time, but not keep them from withering.

1. The roses can be taken out, the flower branches can be checked and pruned, the leaves at the bottom are removed, and the bottom of the flower branches can be pruned at an inclination of 45°.

2. Before hydroponics, soak the rose branches in water, prepare the container, fill it with clean water, and insert the rose branches into the bottle.

3. If you want to prolong your life, you can change the water regularly and drip in a small amount of fresh-keeping liquid.

Potted or ground planted in soil rich in organic sand, pay attention to receiving sufficient light, soil culture has a longer survival period than hydroponics.

The characteristics of roses are that they like cold and are afraid of heat, love yang and avoid yin, are resistant to fertilizer and barrenness, and like to grow in soil with sufficient water and fertilizer. It can thrive in all parts of the Yangtze River, but Lingnan has high temperature and humidity in summer, and there are many pests and diseases, which pose a great threat to the growth of roses.

1 Planting. It can be planted after falling leaves in autumn and before budding in spring, and should be planted in a place with high terrain, sunny and no waterlogging, and the depth should be 15 cm from the ground. When potting plants, the culture soil mixed with humus soil, garden soil and river sand is used, and an appropriate amount of well-rotted manure or cake fertilizer and compound fertilizer is added.

After planting, water once permeable, put the seedlings in a shade place for a few days, and then move them to the sun for cultivation.

2 Light and temperature. Good growth is prompted by abundant sunlight. Both ground and potted plants should be placed in a sunny place, and they should receive direct sunlight for more than 4 hours a day.

In winter, enter the room and put it in a sunny place. It is suitable for growth temperature of 12-28 and can withstand low temperature of -20.

3 Watering and fertilizing. Apply an appropriate amount of organic fertilizer to the tree cavity before planting, and water thoroughly after planting. Ground-planted roses do not have strict requirements for water and fertilizer, and generally have 3 times of fertilizer.

Potted roses can be applied with thin fertilizer water for a long time in cattle, and applied once in 10-15 days after harvesting. Roses are drought tolerant, and are generally planted in the ground without watering, and are watered once every 20-30 days in hot summer or spring drought. Water potted plants once every 2 days, and once a day in hot summer or spring drought.

4 Plastic pruning Generally, there is no need to prune, and the old plants can be pruned with dense branches, dry branches, and diseased and insect branches. Roses bloom, pick as they open or fail, and then open after picking, otherwise they will only bloom once.