How to disassemble the shell of Gree air conditioner to clean the filter?

Here's how to clean the filter:

First, first of all, if we want to take off the filter of Gree Calm King, we need to open the shell of the air conditioner, generally the air conditioner shell is stuck with two small card slots, and gently open the outer cover outward.

Second, the filter screen is relatively easy to take, but it is stuck by a few card slots, first push the filter screen up, and gently put the filter screen.

Third, then we can take off the filter screen in the water to clean, in order to clean more clean, we can use a soft-bristled brush to clean.

Fourth, it should be noted that the filter screen taken off should be dried naturally, and the plastic will become fragile and deformed after being exposed to the sun.

Gree air conditionerTo disassemble and clean the filter, you need to open the outer cover first, lift the filter clip and remove it。The following are the specific steps of how to clean the filter of Gree air conditioner and how to remove it:

Tools Raw materials.

Gree 26GW K

Gree air conditioning system.

1. Before dismantling and washing, unplug the power supply to avoid safety accidents, pull the left and right sides of the air conditioner up at the same time, and then remove the filter after the card slot is automatically stuck.

2. There is a card slot under each filter, lift the card slot and lift it up, you can remove it.

3. Rinse the filter with clean water.

The removal method of Gree air conditioner cleaning filter is as follows:Tools Raw material: Gree air conditioner.

1. The air conditioner filter is hidden under the cover, and the buttons on both sides of the cover are opened by hand, as shown in the figure below

2. After the buckles on both sides are opened, turn the cover plate upwards, as shown in the figure below

<>3. Open the cover plate to see the filter screen, push the handle up, and push the edge of the filter screen out of the card slot, as shown in the following figure:

4. After the filter comes out of the card slot, slowly pull out the filter downward, as shown in the figure below

<>5. The filter screen consists of two pieces on the left and right, and the filter screen on the right side is removed in the same way, as shown in the figure below

<>6. The filter screen is successfully removed, and the radiator is cleaned up, as shown in the figure below

<>7. Clean up the floating dust of the filter screen, it is best to use alcohol to detoxify, then plug it back and cover the panel!

[Hang up]: 1. First turn off the power supply of the air conditioner. 2. Pull the panel apart at both ends of the panel at the same time by hand, and then open the panel upwards, and you will see two filters.

There are differences in the steps of disassembling the panel for different models, please refer to the manual for details) When removing the filter, you should gently push it up, and then pull it down slightly, and the filter screen will be removed. 3. Remove the filter screen, and the small piece is the filter medium (only some models are equipped with it). 4. The function of the filter medium is to remove formaldehyde and bacteria, which cannot be cleaned with water, and the surface dust is cleaned with a soft brush, and then blown clean with a hair dryer for maintenance, or exposed to the sun for three or four hours.

5. Use a vacuum cleaner or water to clean the filter screen, when the filter screen is very dirty (such as oil stains), it can be cleaned with warm water (below 45) dissolved in neutral detergent, use a soft brush, not a hard brush; Then leave in a cool place to dry. 6. Install the cleaned filter back into the air conditioner, and wipe it clean in advance if there are dirty places inside the air conditioner. [Square Cabinet Machine]:

1. First of all, turn off the power supply of the air conditioner. 2. Use a screwdriver to twist the screws on both sides of the fuselage panel to open the panel. 3. Take out the filter and gently pat the bullet or use an electric vacuum cleaner to clean it.

If there is too much dirt on the filter, it can be cleaned with lukewarm water with a small amount of neutral detergent and then cleaned with lukewarm water. 4. After cleaning, it should be dried, then put back in its original place, and close the panel. [Cylindrical cabinet machine] is more complicated, and the operation methods are different, it is recommended to check the manual for operation.

1. Drainage pipes.

The dust in the air enters the air conditioner, and after refrigeration, it flows into the sink with the wastewater, and the dust accumulated for a long time may block the drain pipe and make the air conditioner leak. The cleaning here should generally be carried out by professionals, and some communities are designated as a drainage outlet for air conditioning drainage, once there is a problem, it is not simple to clean up.

2. Face cover and strainer.

The main engine or vertical machine in the room should be the main cleaning parts of the face cover and filter. **There is a lot of dust accumulated in the filter of the air conditioner, which is not only bad for the human body, but also hinders the circulation of air and reduces the effect of refrigeration. If you don't use the air conditioner in a winter, it's easy to leave moldy substances in the air conditioner, so be sure to clean the filter before using it.

If there is not much oil, you can rinse it with water and brush it with a clean soft brush. During use, in order to ensure fresh air, it should be cleaned every 15 days. Rinse the strainer with plenty of running water, dry it, and put it back in.

During use, in order to ensure fresh air, it should be cleaned every 15 days.

3. Outdoor unit cleaning.

The outdoor unit mainly plays the role of heat dissipation, and the outdoor air is also circulated and exchanged through it, and some outdoor units placed near the oil smoke port may also absorb a large amount of oil smoke, which are the factors that hinder the fresh air. The outdoor unit of residential users can generally be rinsed with clean water, and if it is an outdoor unit with heavy oil smoke or by the side of the road, it also needs a professional cleaning liquid to clean it in place.

Fourth, wash and put it back.

Since it is an all-in-one type, it is easier and more direct to bring the dirt from the outside indoors, so it needs to be cleaned even more. The entire machine must be dismantled and moved indoors for operation. Generally, the dust of the window air conditioner used in the family will not be too greasy, and the cleaning method of the indoor vertical machine of the split ** air conditioner can be imitated, the face cover and filter screen are removed, cleaned with water, and the fence on the face cover is brushed with a clean soft brush, and the dirt in the gaps is washed off, and then installed back after drying, so that it is basically done.

After removing the tuyere, the partition and the filter screen bayonet can be taken out, and the filter screen is very easy to operate, and you can see it by disassembling it yourself. If you are not at ease, blowing with a hair dryer will also have an effect, but it will not be removed and cleaned. Hope it helps, hope.

Subject, the operation of disassembling the shell of the air conditioner and cleaning the filter screen is very simple, and the following steps are said.

There are protrusions on the left and right sides of the outer cover of the wall-mounted air conditioner, and you can easily open it by breaking it directly outward with both hands at the protrusion, and then you can see that the filter screen is simply stuck in the buckle, take it out and clean it directly and install it back.

The vertical air conditioner is also in the lower panel can be broken, and then the filter can be directly extracted, and some brands need to remove the screws to open the panel.

Hello. Method Steps:1

Locate the filter Locate the air conditioner filter, unscrew the two screws on the case, and open the lid to see the filter. 2.Remove the filter After opening the lid, pull out the filter inside.

3.Clean the filter Dust visible to the naked eye is cleaned with a broom first, then pour a basin of water and wash it carefully with a brush. 4.

Install the air conditioner back After cleaning, wait for it to dry, and then install it back on the air conditioner cabinet after the filter is dry.

You need to find a recess switch on each side of the air conditioner, and you can take out the filter after pulling it open, and the operation method is as follows:

Device: Gree 26GW K

1. Before disassembling and washing the air conditioner filter, the power supply should be disconnected to ensure safety.

2. Find the switch on the air conditioner panel, one on each side of the air conditioner.

3. Buckle outward at the same time.

4. Buckle the panel to see the filter.

5. Lift up the filter screen buckle.

6. Then you can remove the filter with one pull.

7. Rinse the filter with clean water.

Disassemble and wash the air conditioning filter to ensure safety, first of all, you should disconnect the power supply, Huai rent find the air conditioning panel switch, there is one on each side of the air conditioner, and at the same time buckle outward, you can see the filter screen when you open the panel, lift the filter screen buckle upward, and then pull it to remove the filter screen, and then rinse the filter screen with clean water.

1. Remove the upper cover of the Gree air conditioner. The dismantling of Gree air conditioners still requires experienced personnel to operate, and this operation is best completed by adults at home and people with disassembly experience. Especially for users who disassemble and clean it for the first time.

2. After slowly opening the upper cover of the Gree ** air conditioner, you can see the filter screen of the hanging part of the separated Gree ** air conditioner in the house.

3. The intensity of cleaning varies from person to person. If you have a good habit of cleaning the air conditioner regularly and cleaning it more frequently, then directly use a vacuum cleaner to suck the position of the filter screen, and then wash it with clean water once to dry.

Fourth, clean the filter. Most of the detachable filters are a bit curved, and the cleaning method is usually to use a soft cloth or clean water to clean, and you must not use excessive force. If the filter has been used for a long time and is not suitable for cleaning, you can consider searching for the same model and replacing it directly.

Fifth, there are also two screws at the bottom air outlet, which must be removed together.

6. Remove the entire shell. Usually, the housing can be removed after removing the visible screws.

7. If the removed shell does not have obvious circuit and electronic devices, it can be cleaned directly with clean water, and there will be more dirt in the dead corners on both sides of the machine. If it is difficult to clean, use detergent and a soft brush directly, and finally wipe it to dry.