How should the screen of aluminum alloy doors and windows be cleaned? What should I pay attention to

Nowadays, many home decorations use aluminum alloy windows, and aluminum alloy windows will be equipped with screens, so screens will definitely become dirty after a long time. Of course, if they are dirty, they should be cleaned. So how do you clean the screen?

The first way to wash:

There is a waste newspaper at home. Take it out, dip it in water (preferably one with a lot of words), and stick it on the screen. Take it down right away (don't wait until the newspaper is dry). Repeat this a few times and the windows will be clean.

Vacuuming method: first close the glass window outside the screen window, then put a large newspaper between the glass window and the screen window (or press the newspaper with your hand to prevent the newspaper from flying around), and then glue the vacuum cleaner to the screen window to suck up the dust little by little.

Aluminum alloy doors and windows adopt the method of side wiping. If you wipe all the gauze at the same time, it is likely to make the gauze more and more dirty and inconvenient. We can wipe and wash as much as we can (use a sponge when wiping, with the help of the sponge's dust adsorption function, so that the dust does not fly freely).

The second way to wash:

A very affordable, eco-friendly, convenient method: dilute flour with water. Note:

1) If the water is boiled; (2) The ratio of flour and water is appropriate. Just live outside of mushy water. When the slurry water is slightly cold, add an appropriate amount of laundry detergent (depending on the amount of grease), stir well, brush the slurry directly on the screen window with a special brush, pat it lightly after drying, and the grease and stains will fall off with the flour.

First use a soft brush to gently brush off the floating dust on both sides, then soak two pieces of sponge or plastic foam in some detergent solution or soapy water, hold one piece with one hand, clamp the same part of the screen from both sides, wipe from top to bottom, and then from left to right; Finally, dip it in water and gently wipe it so that the dust on the screen can be completely removed.

Sliding screens are easy to clean. As soon as you remove the door and window screens, you can clean them and put them on. If the hidden screen is not easy to remove, you can directly use a brush to brush off the dust on the screen and wipe it clean with a rag.

Sliding windows are mainly used for plastic steel sliding windows or broken bridge aluminum sliding windows. Invisible screen windows are mainly used for plastic steel casement windows or broken bridge aluminum casement windows.

How should the screen of aluminum alloy doors and windows be cleaned? What should I pay attention to? The screen window can be taken down and rinsed slowly with a watering can, and a sponge is used when wiping, with the help of the sponge's dust adsorption function, so that the dust will not fly around.

The screens of aluminum alloy doors and windows must be removed when cleaning, and then rinsed with a water hose to be cleaned. Be careful not to overexert force, as this will damage the screen.

The screens of aluminum alloy doors and windows, we can remove them and clean them directly, it is best not to use a brush that is too thick or too hard, if there is a vacuum cleaner, you can directly use the vacuum cleaner to suck it.

Some brushes can be used for cleaning, be sure to pay attention to safety, you need to pay attention to the time of cleaning.

Summer is coming, screen windows are indispensable for every family, because there are a lot of mosquitoes in summer, in order not to be bitten by mosquitoes, users will buy screen windows for installation. At present, the most popular screen is aluminum alloy screen. Because the screen window is fast to make and easy to install, the following is how to maintain the aluminum alloy screen and how to buy the aluminum alloy window screen.

1. How to maintain aluminum alloy screens.

1. Pay attention to closing doors and windows when the weather is bad.

When encountering wind and rain, do not close the doors and windows. Before closing the window, you should close the screen in advance, and if the screen blows out due to too strong wind, you should push the screen screen to the track in advance and then pull the screen.

2. Scratch treatment.

If the appearance of the mosquito screen frame is scratched or scratched carelessly, you can apply a little paint. Do not step on the aluminum profile of the mosquito-proof screen door to prevent the damage of the aluminum profile of the mosquito-proof screen door.

3. Uniform force.

When using the screen window in daily life, it is necessary to push and pull it parallel along the track when dragging the screen window beam to prevent the forced uneven force and cause the mosquito-proof screen window beam to fall out.

4. Don't stay still for a long time.

During use, it is best to push and pull the mosquito screen frequently, and do not leave the mosquito screen untouched for a long time. Since the screen does not need to be disassembled and cleaned, the sliding screen can have a cleaning effect, and the most worrying thing is that the dirt will accumulate and roll into the yarn box. If the screen door of the kitchen encounters oil smoke, you can clean it with a damp cloth with dish soap.

2. How to buy aluminum alloy window screens.

1. Look at the materials.

The aluminum alloy screen, its thickness, hardness and oxide film, etc., must meet the relevant national standards, the wall thickness should be above, the tensile hardness should reach 157 Newtons per square millimeter, the strength of the bending finger should reach 108 Newtons per square millimeter, and the thickness of the oxide film should reach 10 m. If it does not meet the above requirements, it is a poor quality aluminum alloy screen and cannot be used.

2. Identification mark.

Generally, large and regular manufacturers will mark the logo of aluminum alloy window screen in a prominent position of the product, including trademark, product name, model, production date and number, etc. In this way, it is necessary to meet the requirements of the regular product.

3. Look at the processing.

The aluminum alloy screen window is refined, the device is exquisite, the closing effect is good, and the switch is simple. Poor quality aluminum alloy screens, cutting corners in workmanship, replacing milling production with saw segmentation, not implementing devices as required, poor closure efficacy, and bad switching. Counterfeit aluminum alloy screens are not only prone to air leakage and glass cracking, but also easy to drop or fall the glass when the wind blows.

Crack repentance.

There are a lot of dirt and dust on the screen window, teach you a trick, and the dust stain will disappear immediately.

Tips for cleaning the screen window, prepare a watering can, add dish soap, white vinegar, and toilet water, dilute it with warm water, spray it evenly on the screen with a watering can, and then wipe the screen with a rag to clean it.

It seems that it is not easy to remove and clean, pull it down to beat the dust, or change the mesh.

The screens of broken bridge aluminum windows are relatively easy to clean.

At the beginning of use, it is best to vacuum the curtains at the turn of the seasons or clean them with a soft cloth dampened with a little commercially available detergent.

The screen does not need to be removed for cleaning, it can be cleaned when the screen is pulled, or patted with a feather duster to clean the screen. If the kitchen screen window is stained with oil smoke, you can use a damp cloth dipped in some dish soap to gently wipe the screen and then wipe it with a damp cloth, and wait for the screen to dry before rolling it back.

Just take it off and wash it like a shoe, which I wash a lot.

Nowadays, many home decoration uses aluminum alloy windows, and will match aluminum alloy windows with screens, so the screen windows will definitely become dirty after a long time, and of course they must be cleaned if they are dirty, so how to clean the screens?

One: Screen window cleaning without grease.

1. If you have a waste newspaper at home, take it out, dip it in water (the best hall key is the kind with a lot of words) and then paste it on the screen window, take it down after a while (don't wait for the newspaper to dry and then take it), repeat it several times, and the window will be very clean.

2. Vacuum cleaner vacuuming method: first close the glass window outside the screen window, and then put a large newspaper between the glass window and the screen screen manuscript window (or press the newspaper with your hand to prevent the newspaper from flying), and then use the vacuum cleaner to stick to the screen window and suck up the dust little by little.

3. Aluminum alloy doors and windows are used to wipe and wash at the same time, if all the screens are wiped at once, it is likely to make the screens more and more dirty, and it is also very inconvenient. We can scrub and wash as much as we can (use a sponge when wiping, with the help of the sponge's dust adsorption function, so that the dust will not fly around).

Two: Cleaning of screen windows with grease.

1. Very affordable and environmentally friendly Very convenient method: dilute the flour with water. Note:

1) The water should be boiling; (2) The proportion of flour and water is moderate, live out the paste water, when the paste is slightly cool, mix in the appropriate amount of laundry detergent (depending on the amount of grease), stir well, use a special brush to brush the paste water directly on the screen window, and hit it lightly after drying, and the grease and stains will fall off with the flour.

2. First use a soft brush to gently brush off the floating dust on both sides, then use two sponges or plastic foam, dip some washing powder solution or soapy water, hold a piece with one hand, clamp the same part of the screen window from both sides, first wipe from top to bottom, and then wipe from left to right; Finally, dip it in water and gently wipe it so that all the dust on the screen can be removed.