-
How to get water into your phone:
1. First of all, when you accidentally find that your mobile phone is in water, you should pick it up immediately, the longer the mobile phone is soaked in water, the greater the damage, so you should not hesitate to pick it up if you find that your mobile phone is in water.
2. After picking up your mobile phone, you must not perform any key operations on the mobile phone, especially if it is a touchscreen smartphone. You should carefully remove the back cover of the mobile phone battery, peel off the mobile phone battery, and power off the mobile phone.
3. After the power is off, you can carefully wipe it with a dry cloth, and then you can move on to the next step after wiping off the external water droplets. Do not use a hair dryer to dry your phone, otherwise the heat may cause devastating damage to the sensitive components inside the phone.
4. Next, put the external dried mobile phone into a sealed container, wrap some plastic bags on the outside, and use rice to fill all the containers, so that the mobile phone is submerged in the container, and it is better to leave it for 1 2 months. In general, if possible, put in desiccant for better results.
5. After one month, take out your mobile phone, install the battery, and try to turn it on. If it can be turned on successfully, then the phone can be used normally, if it can't be turned on, you can only consider buying a new phone.
-
Take it to the after-sales service to check it and see if there is any damage.
-
How to deal with water ingress in Apple mobile phones:
1. Quickly pick up the mobile phone that fell into the water, and if the mobile phone is turned off at this time, do not try to turn on the phone and light up the screen.
2. Quickly find a dry rag or paper towel around you, wipe off the moisture on the surface of the phone, and try to keep the phone flat on the desktop during the wiping process.
3. Prepare a sealed bag and gently put the phone in it to isolate moisture from the outside air.
4. Prepare a few small bags of desiccant, put the desiccant in a sealed bag, seal the mouth of the bag, let it stand for a few days, and then try to turn on the phone. If the fruit is invalid, it is recommended to go to the after-sales service center of the Apple mobile phone for repair.
-
In the process of daily use of mobile phones, we may accidentally let the mobile phone screen get into the water, causing the mobile phone screen to malfunction.
What should I do if the screen of the Apple iPhone is out of order? Is it scrapped and unusable? Actually, water on the screen of the Apple iPhone does not mean that it is scrapped, you can try the following methods to see if it can be solved.
Method 1: Use a hair dryer to blow on the air.
When the screen of the Apple iPhone is out of order, don't try to turn it on, but let the phone continue to come out of the water, and then use a hair dryer to dry it as soon as possible. After the surface is dry, continue to blow along the gap or jack of the mobile phone to ensure that the dry position is completely done.
Method 2: Dry with an electric heating bag.
If the problem cannot be solved after using a hair dryer, then it is necessary to use an electric heating treasure.
Prepare two dry towels with good water absorption, wrap the phone with a towel, wrap at least three layers, and then use an electric heating treasure to dry, so that all the water hidden in the phone will seep out, and the problem of the mobile phone entering the water screen can be solved.
Method 3: Send it for repair.
Many screen failures are caused by hardware failures, and these can only be sent to after-sales maintenance after trying the above solutions to no avail.
In addition, after the screen of the Apple iPhone mobile phone is flooded, it is necessary to pay special attention to the following points:
Don't shake your hands back and forth.
Do not force it on.
Under normal circumstances, the internal motherboard of the fuselage is equipped with power protection after the mobile phone enters the water, at this time the mobile phone is in a shutdown state, remember not to force it on, otherwise it is easy to cause the motherboard to short circuit and be scrapped.
Do not use the hot air function of the hair dryer.
The conductivity of water and the high temperature of hot air may cause leakage of the battery interface or a short circuit in the internal circuit and burn the phone.
-
iPhone: These are all relatively common failures. It's just that all of a sudden the screen fails and you can't click on the screen.
This shirt is generally caused in this way.
1. I have fallen, or I have fallen not long ago, or I regret that the touch screen has been loosened, and after a period of time, the wiring will fall off directly.
Second, if it has been flooded, it can be used again when it is dry, as if it is fine. In fact, the motherboard must be cleaned, otherwise the circuit will rust and there will be problems after a period of time.
3. High imitation charger and charging cable. Many people will adjust the package when they buy it, and it will be a high imitation when they get it back, and it will hurt the power supply after using it for a while. Directly scrap the phone, especially the Hong Kong version of the mobile phone.
Fourth, charging while playing with your phone will also hurt your phone. Sometimes the current is too high and burns the inner screen.
Is there any way to fix this, check it, if the line is loose, change the line. If the inner screen is broken, directly replace the screen assembly.
If you change the screen, it is the touch screen IC problem of the motherboard, the so-called touch screen IC is a chip that controls the touch screen, which can disturb the cavity change, but the process requirements are very high, this is a chip-level maintenance, and the general small shop will not. It is recommended to bring your mobile phone to a regular Apple customer service center for inspection and repair.
-
Resolutely sent it for maintenance, and it is estimated that it will be replaced if the water is bad.
-
Quickly turn off the machine, and turn it on again after the water has completely evaporated in two to three days, and if the contents are not burned, it will be saved.
-
Hurry up and fix it, I'm like this, desiccant, rice bags are used, it's useless!! It won't be good on its own. If other functions are not affected, it will be hundreds of repairs, so it is better to add money to replace them with new ones.
But different situations are handled differently, so let's go to the specialty store and ask first. Anyway, the longer it drags on, the more disadvantageous it is, and when the motherboard is broken, it will be over, and even if the phone is repaired, the life of the phone will be short.
-
Don't turn on the machine, remove the battery, use a vacuum cleaner to suck the water in the gap, and then remove it to the maximum, on the side of the pump, throw it in the refrigerator for 10 days, the refrigerator has a dehumidifying function, and it depends on luck if you save it. Don't worry about the warranty, you're gone. The machine in the back is dry, and it depends on the situation to decide whether to repair it or not.
-
Turn off the machine first, shake the water clean, dry it with a hair dryer, and if it can't be used, take it to after-sales maintenance.
-
iPhone5s water ingress please deal with it as follows:
First, don't try to turn on or charge the computer if there is water, because the Apple iPhone has a built-in battery that cannot be removed, and the motherboard will be short-circuited if the water is in, and the motherboard may be burned when turned on or charged;
Second, because water is conductive, and even if it is tap water, it will be acidic and alkaline, which is corrosive, so it needs to be taken to the maintenance center immediately after water ingress to be disassembled and cleaned up, so as to avoid water residue on the motherboard and mold, corroding other parts;
Third, if the water is at night and cannot be repaired, you can put the mobile phone in the rice tank or under the lamp, absorb the water and bake it a little, and please send it for repair immediately the next day, the first is because this can only absorb the external water, but the internal water cannot be sucked dry, and the second refers to the second point;
Fourth, non-professionals please do not disassemble the machine by yourself, there are many disassembly tutorials on the Internet, but the Apple mobile phone is very precise, and non-professionals disassemble the machine by themselves, which will cause more serious damage to the machine.
It is useless to shut down the iPhone when there is water in, because the iPhone has a built-in battery, and if the battery is not removed, the battery will continue to power the motherboard; Therefore, it is necessary to send it to a professional maintenance point for cleaning and drying immediately after water ingress, the first is to prevent the motherboard from burning out, and the second is to prevent the motherboard from growing mold.
The wifi gray is very likely to be the wifi burned out, and it is recommended to send it for repair as soon as possible to avoid more and more follow-up problems.
-
Turn it off and then don't do anything and don't throw it off after sale.
If there is no after-sales area, take it to the Apple repair point, disassemble the machine, blow dry it with a heat gun, and then test it, and the motherboard will be fine if it does not burn.
Set the date and time on your iPhone: Choose General Date & Time, then turn off Set Automatically. Tap Time Zone, then enter the name of a major city in your time zone. >>>More
No, sunlight.
Exposure to the sun will cause burns to the original, damage the electronic components, and the temperature is too high, which will cause irreparable consequences to the fuselage, and should not be exposed to the sun. >>>More
What to do if your phone screen is broken.
According to reliable information, there are two ways to solve it, but you need to connect your iPhone5S phone to the computer and then operate, let's introduce it below: Method 1: Use iPhone's recovery mode, the steps are as follows: >>>More
After the mobile phone is flooded, most of the cases cause failures such as failure to turn on, abnormal display of the mobile phone and noise on the call. And some water inlet machines corrode the circuit board more seriously, resulting in the mobile phone can not be repaired for life. Therefore, when the mobile phone enters the water, whether it falls into clean water or dirty water, the mobile phone battery should be removed, and the mobile phone should not be charged again, such as continuing to charge the mobile phone, the internal components of the mobile phone will be short-circuited and burned out. >>>More