What to do if the tap water is yellow and turbid, what is the matter with the yellow tap water

If it is a short period of yellow water.

It may be that the water pipe is rusty, just let it go for a while; If it is a continuous flow of yellow water, please notify the water company in time to send someone to deal with it.

Solution: Let it stand, and the water will be clear after the dirt settles. Or wait for the dirty water to drain until it receives clean water.

Reason: Generally, the water line pipe is ruptured, and the soil brought in after repair.

In general:

There are several possible reasons for the turbidity and yellowing of the water quality, first, the secondary pollution of tap water caused by the rust caused by the galvanized pipe in the user's home due to long-term use or pipe quality problems, this phenomenon is particularly prominent in the morning. At this time, you can find a professional company to replace the water pipe;

2. Users who use the water of secondary water supply facilities are prone to secondary pollution of tap water because the property right unit fails to regularly clean and disinfect the pool and water tank according to the regulations. At this time, the pool and water tank should be cleaned in time;

3. Due to the sudden burst of the water supply pipeline on the road due to force majeure, the sediment brought into the process of emergency repair may cause local and short-term muddy water. In this case, it can return to normal after the muddy water is removed.

Fourth, the water quality is white is the tap water dissolved into gas, decomposed into tiny bubbles by pressure, it looks like the water is milky white, after a few minutes of stationary, the bubbles will disappear by themselves, the water quality becomes clear, this phenomenon will not affect the water quality.

Tap water turbidity treatment method:

1. Sedimentation method: If the tap water has a large sediment content, the sedimentation method can be used, and the impurities will be precipitated after standing for a while after receiving the water, and it can be drunk;

2. Water discharge method: If the water pipe pressure changes due to the adjustment of the water supply system, the scale may be washed out, which is short-term, temporary, and not continuous.

There are many main reasons why tap water is yellow:1. It may be caused by rust on the inner wall of the pipe.

2. The water source treatment is not clean or suffers from major pollution.

3. There is yellow sand entering, and the precipitation is incomplete.

4. The design, installation and management of secondary water supply facilities in the community are not standardized.

5. The occupancy rate of the new community is low, the water circulation is not good, and it is easy to cause stagnant water areas.

Be careful when using tap water.

In order to ensure the safety of drinking water, the production process of tap water needs to be chlorinated to ensure that the tap water contains a certain concentration of residual chlorine, so as to inhibit and kill the bacteria in the water, so as to ensure the safety of the user's terminal water quality.

Tap water is convenient, clean and relatively safe to use. However, tap water is sometimes polluted, such as in the process of transportation, often due to the aging of tap water equipment, rusted pipes or unclean water tanks and reservoirs, etc., resulting in secondary pollution, especially overnight faucet water, which is neither clean nor safe.

For houses that have been uninhabited for a long time, they should go to the customer service center of the relevant water affairs jurisdiction to go through the procedures for suspending water use and close the water valve; Leave your ** number with your neighbors or utility company so that you can contact in case of emergency.

There are several reasons why tap water turns yellow:

The first is the secondary pollution of tap water caused by the rust caused by long-term use or pipe quality problems caused by the galvanized pipe from the waterworks to the user's home. This phenomenon is especially pronounced in the morning.

Second, users who use water from secondary water supply facilities fail to regularly clean and detoxify pools and water tanks according to regulations, which is easy to cause secondary pollution of tap water.

Third, the developer does not implement the plan to install the pipeline in a place exposed to sunlight and the temperature is high for a long time, which may produce moss residue.

Fourth, the power outage caused the whole city to cut off water, and after the power was restored and the pumping started, the sediment was strongly washed away, and there would be a small amount of yellowing and muddy sediment in a short period of time.

Fifth, when it rains, rainwater seeps into water towers, water tanks, and pools. Sixth, during the peak water supply period, the user's water consumption changes greatly, which may cause this phenomenon.

How to solve the yellowing of tap water?

The yellowing of tap water can be solved in the following ways, first, check whether the water pipe is rusty, second, install a water purifier, or filter, third, if there is a problem with the secondary water supply in the community, contact the property to solve it, fourth, adjust the water supply system after heavy rain, you can release water for a period of time and then observe.

There are several reasons for the turbidity of tap water, one is the aging of the pipeline, and the tap water is polluted. The second is that you did not have a fault and carried out pipeline repairs. The third is that the whitish water quality is caused by the gas integrated into the tap water, which is decomposed into tiny bubbles by the action of pressure, which looks turbid, but is actually not caused by impurities, but because of small bubbles.

Turbid tap water can be caused by the following reasons:

1.Secondary pollution of tap water: The water filtered by the waterworks is already very clean, but after long-distance transportation, the water quality may be re-polluted.

For example, if the pipe is in disrepair, damaged or corroded, impurities may enter the water pipe; Some communities use high-rise water supply, and the water tank has been undisinfected and cleaned for a long time, resulting in sediment and rust deposits in the water tank, and bacteria and algae will also breed in it, and the water quality may be polluted. In addition, sudden burst pipes caused by force majeure on water supply pipes on roads can also lead to turbidity of water quality.

2.Rusty faucets: If the faucet is used for a long time or if the water has a high level of rust, it can also cause the water to become cloudy.

3.Residual chlorine: In order to sterilize and disinfect, a certain amount of chlorine is added to the tap water. If the chlorine content is too high, it may lead to residual chlorine residue and make the water turbid.

If you find that your tap water is muddy, it is recommended to stop using it immediately and contact your local water company or relevant agency for repair and treatment. At the same time, pay attention to keeping the faucet clean and hygienic to avoid contamination and bacterial growth.

The galvanized pipe from the first valve behind the user's main water meter to the user's home is corroded because it has been used for many years, or because the quality of the tap water pipe itself is poor, and then it has secondary pollution to the tap water, so the tap water is yellow, especially in the morning when the water is connected at the beginning of the senses. If there is this yellowing phenomenon, then it is best to put away the first glass of water in the morning, not for washing, it will be harmful to the human body.

Problems in the secondary supply of tap water make the tap water yellow. For example, the property right unit does not regularly wash and disinfect the pool according to the regulations, which makes the tap water seriously polluted twice, so it looks yellow.

Be careful when using tap water.

In order to ensure the safety of drinking water, the production process of tap water needs to be chlorinated to ensure that the tap water contains a certain concentration of residual chlorine to inhibit and kill the bacteria in the water, so as to ensure the safety of the user's terminal water quality, and the chlorine smell will disappear after the water is boiled, which will not affect human health.

Tap water is convenient, clean and relatively safe to use. However, tap water is sometimes polluted, such as in the process of transportation, it is often caused by the aging of tap water equipment, rusty pipes, or unclean water tanks and reservoirs, resulting in secondary pollution. Overnight tap water, in particular, is neither clean nor safe.

The above content refers to Encyclopedia - Tap Water.

People's Daily Online-Tap water is seriously yellow, affecting normal life!

Hello dear<>

I'm glad you askedWhat is the reason for the yellowing of tap water There are two reasons: one is that the galvanized pipes in residents' homes are corroded due to long-term use or pipe quality problems, resulting in secondary pollution of tap water. This phenomenon is especially pronounced in the morning.

If you want to do so, you need to replace the pipe. With the popularization and use of PE pipes instead of galvanized pipes, the yellowing of water quality caused by pipe rust is expected to be completely solved. Second, the water users who use the secondary water supply facilities are also prone to secondary pollution of the water awarded per mu because the property rights unit does not regularly clean and disinfect the pool according to the provisions of the bending resistance.

Turn on the faucet and release water for a period of time to drain the old water, sediment and rust in the pipe, and the water quality can return to normal in a short time. Regularly clean and disinfect the roof water tank or secondary water supply equipment, and strengthen the management of secondary water supply facilities. Residential properties are to be turned on by opening fire hydrants on a regular basis.

The water quality of the pipe network in the community was monitored, and yellow water was found.

, timely discharge, so that the municipal water supply network new water into the community, after the normal circulation of tap water, can be restored to normal. <

1. Open the faucet and release water for a period of time, and drain the old water, sediment and rust in the pipeline, and the water quality can return to normal in a short time.

2. The property of the community should monitor the water quality of the internal pipe network of the community by opening the fire hydrant regularly, and when yellow water is found, it will be discharged in time, so that the new water of the municipal water supply network can enter the community, and the water quality can be restored to normal after the normal circulation of tap water.

3. Regularly clean and disinfect the roof water tank or secondary water supply equipment, and strengthen the management of secondary water supply facilities.

4. Strengthen the management of pipeline construction and pipe burst repair, after the pipeline construction is completed and the emergency repair is completed, the pipe network should be flushed, and the water supply can only be supplied after the water quality test is qualified.