The aquarium has a filter function, but the effect is not good, how to improve it?

If you want to improve, the best way is to replace this filter a little bigger, and then this water outlet rate is a little more, so that it can be improved well.

The best way is to only make a filter barrel, half of this filter barrel has a relatively large power, and the filtration effect is also good.

We have a lot of household equipment, these basically have some small problems, the main solution is to deal with it in time, because the filtration function on the aquarium is basically a kind of cleaning ability, not cleaning in place, long-term cleaning can be better filtration function.

At this time, it is necessary to replace a filter element in time, and it can also maintain the ventilation effect of this room, and there is also to put less fish.

To ** the size of the filter tank, if the filter tank is too small, so the effect is not very clear, you can make a filter tank again, pay attention to the correct use.

It feels like it is perfectly possible to install these filters under the water tank and then transport them through the pump and water on top of it, which will filter them cleaner.

In fact, you can also find a way to reinstall a filter device, so that you can also make certain improvements, or see if there is a problem to improve.

You can add a thick pipe to the place of the drain, put the filter material inside, and punch the water at the bottom, you can have more filter material, the cultivation effect is good, and the water body will be stable.

You can change the filter, this filter may not be suitable. After changing it, the filter will work particularly well.

You can clean the filter, but if it is still not good after cleaning, you need to consider changing the filter.

You can buy a new one and replace it, or clean the filter function, if it really doesn't work, find some professional workers to repair it.

First, the drip filter box is directly added to the upper filter, the effect is better, but it is not beautiful;

Second, add a filter cartridge, suitable for raising small fish, more beautiful than the drip filter box, but the effect is not as good as the drip filter;

Three: DIY side filter back filter: the back filter on the inside of the cylinder and the back filter on the outside of the cylinder basically need to be customized, you can do it yourself, and you need a certain amount of hands-on ability.

Fourth, change the bottom filter, if it is a finished cylinder, it is not recommended to perforate the bottom filter, you can buy a non-perforated bottom filter kit to install (you can DIY by yourself); If it is a custom-made fish tank, you can punch a hole to change the bottom filter; The cost of changing the bottom filter is relatively high, but the effect is good, the disadvantage is that the bottom filter tank occupies space, if the fish tank does not have a cabinet or there is no place in the cabinet, it is not easy to change;

It is really amazing to raise tropical fish for three years. Can you provide some data?

Generally, the aquarium with a lid has its own filtration, but because the filter box is relatively small, it does not play a big role in maintaining water quality. If you want to change the filtration, you can consider changing to a larger filter cartridge, so that you can put a variety of filter media in it. Of course, if you are worried that the new filter box is not compatible with the original fish tank, you can also directly add an external filter barrel.

Generally, the aquarium with a lid has its own filtration, but because the filter box is relatively small, it does not play a big role in maintaining water quality. If you want to change the filtration, you can consider changing to a larger filter cartridge, so that you can put a variety of filter media in it. Of course, if you are worried that the new filter box is not compatible with the original fish tank, you can also directly add an external filter barrel.

1. Bottom filter: The bottom filter can be said to be the best filter, which will not take up extra space, but is placed at the bottom of the fish tank, and the filtration effect is very strong, because there are many filter materials that can be placed. However, the bottom filter is only suitable for larger aquariums, and if the volume itself is small, it will be a bit wasteful to use the bottom filter.

2. Upper filtration: upper filtration is also a more common filtration equipment, compared with the bottom filter, it is more convenient to install and clean, but the filtration capacity is relatively limited. And because it is placed on the top of the fish tank, it does not look very beautiful, and it will lead to the long-term uneven force of the fish tank, which is easy to increase the risk of bursting the tank.

3. Filter barrel: The external filter barrel is also a good choice, because it is placed outside, so there is no need to worry about the problem of affecting the interior of the fish tank, and its own filtration capacity can also be used, and it is also very convenient to clean.

1. The first step is to fill the water (in the same tank).

You must know that the siphon principle can be formed, there is no need to drill holes, and when the water is filled first, no air can be left in this set of pipes. So we have to plug the gas outlet and add water to the bottom of the whole pipe. After filling up the water, unplug the outlet plug and close the drain valve at the same time, and remove the water pipe that fills the water.

2. Open the valve to start siphoning.

Open this draining valve, the whole pipe will start to siphon under the action of atmospheric pressure, and the water in the fish tank will flow down this pipe to the bottom filter tank. You can see the transverse water level pipe of the whole pipe, the water in it is full, the normal bottom filtration cycle of the fish tank starts to work, and we can turn on the water pump at the same time.

3. After a power outage.

After a power outage, the water level of the fish tank will slowly lower than the water level of the horizontal water level pipe, and there will be water storage in the U-shaped pipe on the left side of the horizontal water level pipe, which is to start the siphon again when the power is called.

4. After the call.

When the call comes, the bottom filter pump begins to work normally, the water level of the fish tank will continue to rise, as long as the water level is higher than the transverse water level tube, the water in the U-shaped tube will be pushed to the transverse water level tube under the action of atmospheric pressure, when the water flow in the water level tube is full, the siphon principle will start again, and our entire lower filter cycle will operate normally.

There are several main reasons why the filter cannot be filtered clean: first, the bottom of the tank is paved with stones, and many impurities must be hidden in the cracks of the stones; Rather, there are too many aquatic weeds, which affect the flow of water; Third, the power of the pump is not large enough; Fourth, the filter cotton is already very dirty; If you want to have very clear water, it is recommended that: first, do not pave any stones and sand; 2. Reducing aquatic weeds; 3. Replace one-third of the bottom water every week.

Fourth, the fish should be raised in moderation, and the feeding should also be able to be eaten.

DIY filter by yourself, the easiest is to make the bottom filter, simple, but it works very well. Many people abroad will use a bottom filter. Send you a finished product**. It's easy to do.

Explanation: The role of the filter cotton, filtering the fish feces and leftover feed.

Biochemical balls: Cultivating nitrifying bacteria and acting as bio-purification.

Activated carbon: adsorbs odors and harmful elements and clarifies water quality.

Coral stone, ceramic ring: culture nitrifying bacteria, biological purification.

The principle of all filters is the same, except for the appearance and the selection and placement of filter materials.

The filter must have 2 or more filtration methods, namely: physical filtration, biochemical filtration, and chemical filtration.

Physical filtration: It is the use of mechanical methods to isolate the larger particles in the water. For example, the remaining feed particles, the bones of dead fish, the excrement of the fish body, secretions, vomit, mucus on the body surface, etc., generally use sponges, spray cotton wool, fine mesh nylon nets, palm leaf fibers, etc.

It is usually installed at the beginning of the filtration system for easy cleaning.

Biological filtration: Cultivating beneficial bacteria and decomposing harmful elements such as ammonia, nitrite, nitrate, phosphate, etc. Commonly used filter materials are: biochemical balls, ceramic rings, glass rings, coral sand, etc. (the most important filtration method, maintaining the ecosystem).

Chemical filtration: It is a method of using chemical agents to remove impurities in water, and the preparations used include water quality stabilizers, flocculants, algaecides, protein decomposition agents, deodorants, etc.

Adsorption filtration: It is a very high carbon content substance such as wood, coal, fruit shell, animal bone, etc., which can adsorb proteins, trace elements, decolorization, deodorization, and even ozone molecules can be absorbed by it. It can also absorb fish urine, microalgae in the water, and drugs.

Here's how to use the filter on the aquarium:

3. Turn on the power supply, observe the operation, if the water supply and water supply are normal, you can use it.

4. Clean and replace the filter material in a timely manner, and artificially add nitrifying bacteria, which will be better.

Answer: There are many kinds of fish tank filters, the bottom filter should be placed at the bottom of the fish tank, the upper filter should be placed on the top, and the filter cartridge needs to be piped into the fish tank. Filter media should be added to the filter box, so that the water can be purified after passing through the layers of filter media. Filtration equipment must be turned on at all times to keep the water flowing, which is helpful for maintaining water quality and also for the health of the fish.

Because I don't know what kind of fish tank filter you have, can you try this method first?

First you have to distinguish what kind of filter you are:

Generally speaking, there are two ways to filter the finished aquarium.

1. Upper consideration: that is, there is a filter box on the top of the fish tank, and the water is pumped into the box through a water pump and filtered and then naturally flows into the fish tank.

2. Bottom box: The water enters the bottom box by gravity, and after filtration, it is pumped back into the cylinder by the water pump.

Which aquarium, what kind of filter, generally after you buy, isn't it all the sales staff who come to install and debug it?

1.Order. Top to bottom Coarse pore filter sleep Medium hole filter sleep Fine pore filter sleep Bottom layer Ceramic ring plus activated carbon! (General Filtration).

2.Change the water regularly 1 2 1 3

3.Add biologics at regular intervals!

There is not enough nitrifying bacteria attachment on the filtration, generally speaking, it is necessary to change the water frequently to maintain good water quality, it is recommended to raise less fish, clean the filter cotton frequently, and the frequency of water change will be greatly reduced.

I put a ceramic ring in my filter box, and I put a filter cotton on top of the ceramic ring, which is used to grow nitrifying bacteria.

1. Under normal circumstances, the order of the aquarium filter material is physical level filtration, chemical level filtration and biological level filtration according to the direction of flowing water, specifically: water inlet (water pump) physical filtration chemical filtration biological filtration (water pump) water outlet, which aims to let the water flow through most of the filter media as evenly as possible to achieve the purpose of "flowing water does not rot".

2. The aquarium is used to raise tropical fish or goldfish glassware to play an ornamental role. It is a container for ornamental use, specially for the breeding of aquatic animals and plants, and is an animal feeding area, usually with at least one side of transparent glass and high-strength plastic. The aquarium is home to plants and animals (usually fish, but can also be invertebrates, amphibians, marine mammals or reptiles) that live in captivity.

Aquarium farming is also one of the most popular hobbies around the world, with about 60 million enthusiasts worldwide. There are many types of aquariums, ranging from simple small tanks for only one fish to complex eco-simulated aquariums that require sophisticated support systems.

The reasons for the poor filtration effect of the fish tank are as follows:

1. The power of the filter pump is too small, resulting in a mismatch between the flow rate and the filter cylinder;

2. There is too little filter material to adhere to the nitrifying bacteria that are enough to treat the water infiltration;

3. The ratio of filter material is improper, and physical filtration or biological filtration is missing;

4. Bactericidal drugs have been used, which affects the function of the allergic system;

5. Excessive cleaning or improper cleaning methods lead to the death of nitrifying bacteria, and the result is that the water becomes more and more turbid.