-
Hello! I think it's **blocked, so it's true that you must learn to solve the problem well.
-
One of the common problems when using a toilet is that it can affect the user's experience and may lead to more serious toilet blockages. Here are some workarounds.
1.Clean the tank filter: Sometimes the filter inside the tank can be clogged with dust and dirt, causing problems with the water flow. At this time, we can take out the filter and clean it, and then put it back in its place.
2.Check the water level control valve: The water level control valve in the tank is stuck, loose or damaged, which can also cause the water flow to be slow. At this time, it is necessary to check whether the water level control valve is installed correctly and whether it is damaged. Replace in time if there is a problem.
3.Check the ditch dredging: The trench located below the toilet drain is easily blocked by some household garbage, paper scraps and other items, resulting in a decrease in the smoothness of the toilet. At this time, it is necessary to check whether the trench is blocked and clean up the blockage.
4.Replace the internal parts of the tank: If the above methods do not solve the problem, then it may be necessary to replace the internal parts. Choose well-branded and reliable quality tank parts and avoid buying inferior products to avoid more problems.
5.Maintain the toilet drain: If none of the above solves the problem, then it is necessary to check the toilet drain for blockages, which usually requires a professional to repair or replace.
In short, if your toilet is slow to drain, don't worry, you can try it from the above methods first, so that the problem does not get worse. If the problem cannot be solved, then it is better to have a professional handle it.
-
When you find that the water on the toilet is slow, you should first check the cause of the slow water on the toilet, and then choose the appropriate adjustment method to solve the problem according to the actual situation. There are many reasons why the toilet fills slowly, and there will be some ways to adjust it...
2.The slow filling of the toilet bowl may be due to the lack of water in the faucet, which causes the toilet to fill slowly with water. At this time, you first need to check whether the filter of the water replenishment device has accumulated a lot of dirt. If a large amount of dust accumulates in the filter,..
3.The slow water supply to the toilet bowl can also be due to the accumulation of a large amount of dirt in the toilet tank, which causes the toilet to supply water slowly. At this point, the toilet tank should be cleaned and replaced, and the tank should be sprayed again in order to:
4.Slow filling on the toilet can also be caused by a damaged valve at the connection of the toilet tank or a misalignment of the position that causes the toilet to fill slowly. At this time, the first thing to check is whether the toilet valve is in good condition, if there is damage.
The solution to the toilet tank not watering is as follows:1. Close the angle valve first, remove the angle valve with a tool, and check whether the angle valve is rusty or scaled. >>>More
1. First of all, open the water tank of the toilet bowl and see what level the scoop inside the water tank is at when it is full. If the water inside is full and the tank is still flooding, then there must be a leak coming out. >>>More
There are two buttons above the toilet lid, press any of the buttons, and then use the flat mouth to change the cone or a knife, and the process should not be too strong, otherwise the toilet lid will be easily damaged; After taking out the two buttons, use a knife or trail to unscrew out the fixing screws of the tank cover; Once the screws are removed, the tank lid can be opened.
Step 1. Before the toilet is installed, the sewage pipe should be fully inspected to see if there is any mud, sand, waste paper and other debris in the pipe. >>>More
Step 1: The toilet tank is located at the back of the toilet, similar to a cuboid. >>>More