What happens if the toilet tank doesn t water? What should I do if the toilet tank doesn t go water?

The solution to the toilet tank not watering is as follows:1. Close the angle valve first, remove the angle valve with a tool, and check whether the angle valve is rusty or scaled.

2. After the angle valve is disassembled, replace it with a new angle valve, and there is a filter screen under the toilet tank, remove the filter screen, and then rinse it with clean water.

When buying a flush toilet, you should pay attention to the appearance gloss of the flush toilet, generally the higher the gloss, the better the quality, and the longer the service life.

The toilet tank does not go to water:

1. It may be that the water pressure is relatively low, resulting in the inability to supply water normally. Or because you live in a high-rise and are in the peak period of water consumption, the water pressure in your home is low, and you can't get water.

2. Either because the inlet valve of the water tank is not opened, or it is only half opened, it will also cause the water tank to not be watered, so it is necessary to open the valve in time.

3. If the triangle valve in the water tank is blocked, there will also be no water supply. At this time, you need to use a tool to remove the triangle valve, clean up the internal stains, and then install the triangle valve back.

4. There is another possibility, that is, the float is damaged. At this time, you need to check the float, if it has sunk to the bottom, it means that the float has been damaged and needs to be replaced with a new one.

Toilet tank to do maintenance work:

When the toilet is in use, it is necessary to do a good job of cleaning and maintenance, so as to avoid the breeding of bacteria, affect the health of the user, and can prolong the service life of the toilet. For daily cleaning, lemon water can be used, which has a good sterilization effect.

1. First of all, check whether the valve (angle valve) switch of the tap water at home is open.

2. If it is open, then check the flush switch: first check whether the flush switch has elasticity and whether it rebounds when pressed, if not, it means that the spring inside the button is rusty, at this time you can replace the button, or if you are not too troublesome, it is okay to press it several times each time you use it to reset.

3. If the water pressure is too low, it is difficult to get into the water. The low water pressure may be caused by the high floor of the house or the overall water pressure of the community, or it may be caused by the water pressure being too low due to the water valve being opened too small.

4. Open the water tank cover to check whether the triangle valve is blocked, if the triangle valve is blocked, the toilet can not be watered, you can disassemble the triangle valve to see if the connection with the inner wire is blocked, and see whether the valve core is open and closed normally.

5. After the toilet is used, the toilet does not have water, which is generally a blockage problem, at this time, you can use some waste toothbrushes and other tools to clean the water parts and filters, of course, with limescale cleaners, the cleaning effect will be better. You can also add some scale remover to the water filler to remove the scale, which is less likely to clog.

6. The toilet can be solved by adjusting the height of the pontoon, and the toilet tank cover will be pushed to the inlet valve, and the inlet valve needs to be adjusted until the float or float of the inlet valve moves freely, and the water generally cannot come in if the floating bucket is stuck.

If the toilet tank is not watered, you can directly add water to the water tank, and the toilet is not watered because the pipeline is blocked, and this needs to be cleaned.

First of all, you have to understand, what is the reason for not going to water? Then find a solution, the easiest is to change the water set for him.

There are many reasons why the toilet tank is not watering? Be sure to check whether there is water in the water pipe and whether the switch is intact in time.

1. Check whether the toilet tank is clogged.

After a long period of use, there may be more impurities in the water tank, resulting in the blockage of the water tank. So it will cause the toilet tank to not water. In this case, you need to use some waste toothbrushes or some cleaning items to clean the water tank, and at the same time, you should also pay attention to cleaning the water tank frequently in your daily life.

2. The height of the floating bucket of the water tank can be adjusted.

You can see if there is a problem with the floating bucket of the water tank. If this is the case, you can solve the problem of the toilet not being watered by adjusting the height of the floating bucket. Because if the toilet tank lid is up to the inlet valve, then the toilet tank will not be filled with water.

In this case, it is necessary to adjust the position of the inlet valve so that the float or float of the inlet valve can move freely. Do not push against the entire toilet tank lid. In this way, the problem of the toilet tank not getting water can be solved.

3. Check the button of the toilet tank.

Sometimes the toilet tank does not water because the button on the toilet tank is not working. If the spring of the internal button has lost its elasticity, you only need to go to the store to buy a button of the corresponding size for a replacement, so that the toilet tank can be used normally.

The easiest solution to not having water in the toilet tank is as follows:

There are too many stains on the filter. Solution: Clean the tank regularly.

The float is not properly positioned. Solution: Check the wear and tear of the leather pad, if the leather pad is damaged, it needs to be replaced with a new leather pad.

Aging of parts. Solution: Replace the toilet tank parts.

Water pipe winding. Solution: Check whether the pipe of the water parts is winded, if it is winding, the pipe needs to be loosened or replaced.

Toilet tank button problem. Solution: Check whether the water tank button is stuck, if it is stuck, you need to replace the button.

The above are a few ways to solve the problem that the toilet tank does not water, I hope it will help you.

If the toilet tank is not running with water, there are usually two things:

The water valve is closed: Check that the water valve is open.

Clogged water valve or pipe: Check to see if the valve or pipe is not working properly due to blockage.

Here's how to fix it:

First of all, check whether the water valve is open, if not, then you need to lift the water valve up to let the water flow into the tank.

If the water valve is open but there is still no aquarium flow into the tank, then the water valve or water pipe may be blocked. You can clean the water valve or pipes and make sure they are not clogged.

If the above methods do not solve the problem, then it may be that the pump has failed, and it is recommended to find a professional to repair the mega source.