How to deal with a leaky toilet tank, how to deal with a leaky toilet tank

1. First of all, open the water tank of the toilet bowl and see what level the scoop inside the water tank is at when it is full. If the water inside is full and the tank is still flooding, then there must be a leak coming out.

2. Use water to pull the card position of the water scoop up and down, and the sensitivity of the water scoop is not smooth, or it is difficult to move, then it is announced that the water scoop equipment has failed. Remember to press the ladle down a little bit, not too high.

3. You can remove the equipment of the water scoop and clean it, if you don't know how to disassemble it, just put dry water in the water tank directly, and try it with dish soap and washing powder. If you can do this, you can continue to use it, if not, you need to replace it.

4. Check the interface of the stainless steel hose at the position of the water tank outside the water tank to see if it is not tightened or the rubber pad inside is aging and causing water leakage. This must be ascertained.

5. If the internal equipment is fine, then it is also necessary to check whether the water tank of the toilet has the problem of cracking caused by impact, and if there is an external force, the water tank may also have the problem of water leakage.

Leaking toilet cisterns are caused by damage or deterioration of the internal components. You can disassemble the toilet tank, find the part that is in trouble, buy the same part to replace it, and then install the tank. If the individual is inexperienced, you can contact a professional to deal with it to avoid the increase in damage.

1 4 Step by Step Reading.

If this happens, we can first look at the position of the horizontal line of the scoop in the toilet when the water tank is full, if the water is full, but the water does not stop entering the tank, then the tank must be leaking.

If this is the case, we only need to pull the water scoop up and down inside. Then see if the water scoop is sensitive, if you find that the water scoop is a little uncomfortable, and it is not easy to move, then we can decisively judge that the water scoop is faulty, you can press the position of the water scoop down a little bit, and adjust it down a little bit not too high.

Or we can remove the scoop, if you find that the scoop is blocked, then we can clean it, if it still leaks after cleaning, then we can directly replace it with a new scoop equipment.

It is also possible that there is a problem with the stainless steel hose that connects the water to the outside of the tank. We can first check the interface to see if the interface is loose and aging, whether it is caused by internal reasons or external reasons, if it is a problem with the interface hose, it can be replaced. The hose of the interface will also deteriorate after a long period of use, and it can be wound with waterproof tape or replaced with a new one.

After the water leak, you should find a professional plumber maintenance worker to check, and you generally don't easily move this thing, because this thing, once it is not good, it is prone to bigger problems, and it is very likely that the toilet will be scrapped.

The leakage of the toilet tank is caused by the damage or aging of the internal components, so you need to disassemble the toilet tank, find the parts that have the problem, and then buy the same parts to replace them, and then install the water tank.

The leaking toilet tank should be water, the shrimp is not in good contact, or it rusts after a long time, it can be repaired again, or replaced with a new one.

The leakage of the toilet tank is likely to be caused by the rupture of the toilet tank, so you can drain the water in the tank first, and then you can use a more powerful glass glue to paste it.

1. Open the water tank of the toilet to see what kind of horizontal line the water scoop in the water tank is, if the water in the width of the water tank is full, but the water tank is still flooding, it means that the water tank is indeed leaking.

2. You can pull the card position of the water scoop up and down by hand to observe the sensitivity of the water scoop, if it is not smooth or difficult to move, it means that there is a problem with the water scoop.

3. It is recommended to remove the water scoop and clean it, if you don't know how to disassemble it, just put the water in the water tank and clean it with dish soap. If it still doesn't work after cleaning like this, you can only replace it.

4. There is also a situation that the rubber pad at the interface of the stainless steel hose at the water tank position is aging and causes the leakage of the trouser belt finger, or the leakage of the water distribution caused by the lack of tightening, which needs to be checked clearly.

5. If there is nothing wrong with the equipment in the water tank, then it is recommended to check whether the water tank of the toilet is cracked, and the water tank will also leak if it cracks.

1.The rubber ball valve is broken. Workaround:

Once the rubber ball valve is broken, the sealing of the entire tank is not good, like a hole in the barrel, so the water will continue to flow out. In this case, it is very simple, just change to a rubber ball valve that matches the model.

2.The rubber gasket of the drain is aging.

Solution: After long-term use, the rubber gasket will become thinner and thinner, and eventually it will age completely. Once the rubber gasket is aging, the sealing of the water tank will deteriorate, and the first acre of treatment is to replace a new rubber gasket.

3.The link between the float ball and the water inlet switch is loose.

Solution: Open the toilet tank, we can see a small ball floating on the surface of the water, and the small ball is connected to the water inlet with a water pipe. Check whether the connection between the two is tight, if it is loose, just tighten the connection and it is OK.