How to tune a guitar, there are several ways to tune 20

1. If your ears are easy to use, adjust them yourself.

The two-string five-fret has the same pitch as the one-string open string, the three-string four-fret has the same pitch as the two-string empty string, the four-string five-fret has the same pitch as the three-string empty string, the five-string five-fret has the same pitch as the four-string empty string, and the six-string five-fret has the same pitch as the five-string empty string.

2. Timpani.

About 3 yuan for 1 But you still have to distinguish the pitch of the timpani and the pitch of the piano by your own ears.

3. The electronic tuner (which can also be used as a metronome) personally recommends this method of tuning.

About 100 yuan a piece.

There is no technical method that is convenient and accurate.

4. Find a well-tuned guitar.

Each string contrasts the key.

ps.The newly bought strings have to be tuned a few more times, because after the tuning, it is likely that the tone will not be accurate after playing a few times, which is normal, just play more.

There are several ways to tune the strings:

1) Use a flute or electronic tuner to directly calibrate the empty string tone of the six strings, this method should theoretically have no error, but for the flute, usually its manufacturing error is large;

2) For experienced players, the 6 strings can be adjusted directly through the ear hearing, not only to ensure that the interval relationship between the strings is correct, but also to ensure that the pitch is basically the same as the standard pitch, which is difficult for the average enthusiast due to the lack of special training;

3) Through the tuning fork, piano, harmonica and other instruments with fixed pitch, set a certain note on the guitar first, and then calibrate each string according to the interval relationship.

The 5 frets of 1 Hyun should be the same pitch as 2 Hyun, 2 choices should be the same as 3 selections, 3 selections should be the same as 4 selections, 4 selections 4 frets should be the same as 5 selections, and 5 selections should be returned to 6 selections and 5 frets.

In the case of C, if the tone name is used to indicate the open string pitch of each string, the standard pitch of a guitar ranges from thick to thin, which are E, A, D, G, B, and e. As follows:

1 string: the open string note e (the thinnest string), that is, the mi. of the treble.

2 strings: The open string note B, which is the si of the alto.

3 strings: The open string sound G, that is, the so-sound of the alto.

4 strings: The open string sound d, which is the res of the alto.

5 strings: The open string note a, which is the la of the bass.

6 strings: the open string note e (the thickest string), that is, the bass mi.

Of course, this is only the standard pitch, and high-level musicians can adjust the pitch that suits them according to their actual needs and different styles. Guitar tuning can be achieved through electronic tuners, and there are already LCD tuners on the market, which only need to pluck the strings to achieve precise string adjustment.

There are five ways to tune a guitar.

First, keyboard instrument tuning.

With the help of keyboard instrument tuning, find the pitch corresponding to the 6 strings of the guitar in the keyboard and tune it to the same pitch.

2. Pitch contrast tuning.

1. Take the first empty string note as the reference tone.

2. Adjust the pitch of the 2nd string so that the 5th fret of the 2nd string and the 1st string are the same;

3. Adjust the pitch of the 3rd string so that the 3rd string 4th fret and the 2nd string empty string sound are the same;

4. Adjust the pitch of the 4-string string so that the 4-string frets and the 3-string empty string note are the same;

5. Adjust the pitch of the 5 strings, so that the 5 strings and 5 frets and the 4 strings are the same;

6. Adjust the pitch of the 6 strings so that the 6-string frets and the 5-string empty strings have the same tone.

3. Timpani flute tuning.

The timpani is usually marked with the corresponding string, and when it is blown, the corresponding string is played so that the tuning string and the timpani are of the same pitch.

Fourth, overtone tuning.

Overtones are when the fingers of the left hand are gently floated on the corresponding fret, and after the right hand is played, the left hand quickly leaves the string, and the bright natural overtones can be obtained.

5. Electronic tuner tuning.

This method is best suited for beginners, for example: plucking 1 string and the tuner shows e; Pluck 2 strings, tuner shows b; Pluck the 3rd string, and the tuner shows G; Pluck 4 strings, tuner shows d; Pluck the 5 strings, and the tuner shows A; Pluck the 6 strings and the tuner shows e.

The above are a few ways to tune the guitar.

Tuning is one of the important aspects of guitar playing, and there are several commonly used guitar tuning methods:

Electronic tuner: An electronic tuner is a commonly used guitar tuning tool, which shows the accurate pitch by the frequency of the sound vibration, and the user only needs to adjust the tension of the strings so that the pointer on the display points to the correct pitch, and the tuning can be completed.

Guitar saddle: A guitar saddle is a marker printed on the headstock to instruct the player to play the guitar at the correct pitch. The player can adjust the tension of the strings according to the guitar saddle so that it reaches the correct pitch.

Ear tuning: Ear tuning requires the player to have a high sensitivity and accuracy to pitch, and to adjust the tension of the strings by comparing the sound produced by the strings with the specified pitch to achieve the correct pitch.

Tuner: A tuner is a mechanical guitar tuning tool that adjusts the tension of the strings by rotating a wire or knob to achieve the correct pitch.

It should be noted that different guitar tuning methods are suitable for different playing situations and personal preferences, and players can choose the tuning method that suits them according to their own needs. When tuning, listen carefully to the timbre of the strings, be patient and deaf to achieve a more accurate effect.