How to solve the problem of phone screen dust sucking? 250

There is dust that does not exist all the time in life, so it is normal to have some dust on the screen of the mobile phone, and you can clean it up regularly.

1. Disassemble the phone screen. Gently one end of the screen with a knife along the phone screen and slowly use a screwdriver.

Perform warping. Use a knife to clean the build-up underneath.

2. Clean up the garbage inside the phone. Gently wipe the inner screen with a cotton swab soaked in alcohol, and go deep into the surroundings to clean up the garbage around as much as possible. and place in a dust-free environment.

3. Clean up the outer screen. Use an alcohol-soaked cotton swab to remove the garbage and sticky objects on the outer screen, and if it can't be removed, use a knife to scrape it as much as possible, and then clean it up with an alcohol cotton swab.

4. After the alcohol on the inner screen and the outer screen of the mobile phone volatilize, use 502 glue in the place where the mobile phone is connected to the outer screen.

Drip and be careful not to overdo it. Place the outer screen starting from one side and closing it all at the end.

5. Gently press the surroundings to ensure that the adhesion is complete.

6. Wipe the outer screen with a new cotton swab soaked in alcohol.

Most customers complain that in the process of use, the original film of the mobile phone will cause static electricity due to friction in the pocket, and the phenomenon of dust and sticky hair will appear.

This static phenomenon is unavoidable, so it is recommended to use an anti-static film to solve it.

What kind of film is the anti-static film we often say?

The anti-static film itself has an antistatic effect and can protect electronic products from static interference.

The glue antistatic agent is the core of the film, and it is precisely because of its addition that the film itself has excellent antistatic effect.

After directly mixing with glue, it is directly applied to the surface of the coating and dried naturally, which effectively avoids the damage to the electronic devices caused by static electricity during the operation of the film in use, such as electrostatic staining and peeling.

If you have other questions about antistatic agents, please click on the official website of Shandong Juli Antistatic Technology for consultation, or call the service 17862057988 directly, we look forward to your call!

Isolate it with a waterproof bag.

Do not wear clothing that is prone to static electricity.

In fact, you can wipe off your fingers, and you can remove it when you rub it to generate heat.

Now no one should be stupid enough not to apply the film, and you can wipe it with whatever you want after the film.

Summary. Hello, if it is a soft film and plastic film that comes with the mobile phone from the factory, it is easy to absorb ash, you can change the hydrogel film, tempered film, or a special anti-static film.

Hello, if it is a soft film and plastic film that comes with the mobile phone from the factory, it is easy to absorb ash, you can change the hydrogel film, tempered film, or a special anti-static film.

The mobile phone screen cover is relatively smooth and clear, so a little dust will be easy to see, plus there is a lot of dust in the air, and the fingerprints will be left when the screen is touched every day, so it looks dirty.

Isn't that the same as not saying it? Is there a problem that can be solved without changing the film?

Wipe with a paper towel feels more and more dirty, because the paper towel produces static electricity in the process of wiping, but it is easier to absorb dust, the correct way is to wipe with a paper towel dipped in a little water or alcohol. Quick dusting method for mobile phone screen: 1. Put a few drops of wind oil essence on the mobile phone screen 2. Wipe the screen repeatedly with a paper towel Xiangtan, and the screen will be clean instantly.

I want the kind that doesn't stick to the ash forever.

How could it be.

You play with your phone, and your hands are dusty.

It's the same for everyone.

But in his pocket he easily sucked it himself.

There will definitely be dust on this that cannot be avoided.

You can buy a special bag for your phone.

Put your phone in your bag before putting it in your pocket.

It will be better to replace the mobile phone screen film with hydrocondensate film, and the tempered film will be more serious in ash absorption.

Because the hydrogel film is a honeycomb structure, with super toughness of TPU material made of poor soft film. The tempered film is made of tempered glass as the material, and then covered with a multi-layer protective coating, which has high hardness, wear resistance and scratch resistance.

Most of the dust in the phone comes from the headphone slot, you can take the black soft cap of the refill we usually buy and plug it into the headphone slot! Just right! And it's pretty beautiful! It looks like it was delivered in its original packaging!

Brand model: Huawei P40

System: HarmonyOS

If your phone screen is gray, you can turn off the simulated color space by clicking Developer Options in the Settings System and Update interface. Taking the mobile phone key Huawei P40 as an example, the steps of the gray screen of the mobile phone are divided into 4 steps, and the specific operations are as follows: 1 Click System and Update In the settings interface, click System and Update.

2 Click on Developer Options In the System & Update screen, click on Developer Options.

3 Click on the Simulated Color Space Kena Pin In the Developer Options screen, click on the Analog Color Space.

4 Click Close In the interface, click Close.