What is the easiest way to make a handmade kite in kindergarten?

Prepare materials: newspaper, bamboo strips, red thread, kite string.

1. First take a piece of newspaper, you can also use a cloth and fold it as shown in the picture below.

2. Then cut off the excess part of the newspaper, and after opening, cut out a square of newspaper, as shown in the figure below.

3. Then prepare two thin bamboo strips, preferably fresh bamboo, because of good elasticity and easy to bend.

4. Then, as shown in the figure below, fix the bamboo strips to the square newspaper, and one of the bamboo strips should be bent. It is more convenient to fix it with adhesive tape.

5. Take another piece of newspaper and cut out six strips of paper on the longest side.

6. Fix 6 strips of paper on the kite, as shown in the figure below.

7. Cut out two more lines, fix them to the kite as shown in the figure below, and glue them firmly with tape, so that a kite is ready.

8. Finally, take a look at the scene of flying a kite in the wild, it is easy to fly.

Tools Raw materials: paper, bamboo or wood strips, nylon rope, thread.

Method Steps:

1. The first step is to fold the paper into a diamond shape, or draw a diamond shape, and cut off the excess ground part to make the paper into a diamond shape. As can be seen, the bottom of this diamond is 15 cm, while the upper part is 35 cm.

2. The second step is to prepare two wooden strips, one 30 cm long and the other 50 cm long, fold them to form a cross and tie it with a rope, the top of the cross is 15 cm high, and the lower part is 35 cm high.

3. The third step is to poke two small holes in each of the four corners of the cut paper.

4. The fourth step, prepare two nylon threads, tie the two ends of a rope to both ends of the short wooden strips, and then tie one end of a slightly longer nylon rope to the top of the nylon rope.

5. The fifth step is to tie some of your favorite streamers to both ends of the kite and the tail. When preparing to fly, attach a bundle of very light strings to the end of the nylon rope so that the kite is ready.

The most simple handmade kite making in kindergarten is as follows:Material preparation: colored paper, bamboo sticks, transparent paper, silk thread, scissors, glue.

Operation steps: 1. First take a rectangular piece of paper, make the transparent paper into a rectangle and coat it with white glue around it.

2. Then take out three bamboo skewers, glue the three bamboo skewers and stick them on transparent paper.

3. Then take out the glue and fix it with tape.

4. Continue to post a piece of thin paper on the clear paper of the Tongcha Lead Penetration Hall, and post the pattern of slow burning like the group.

5. Finally, the silk thread can be fixed and pasted on the kite.

The kite making method handmade kindergarten is as follows:

1. First, take a piece of A4 paper and fold it in half along the long side. Then draw a bird's eye with a marker near the corner at one end of the folded line, turn it over when you're done, and draw the other eye on the opposite side.

2. Continue to open the paper and draw the bird's feathers on both sides of the inner fold line. The paper is folded at the end with one side facing outward, so you can draw with markers of various colors to make the bird's feathers colorful.

3. Then fold the paper in half again, fold it down at the corner of the opening near the eye, and fix it on the edge of the fold line with a stapler. Then draw some triangular shapes on the edge of another piece of paper as a beak.

4. Continue to cut out the triangle shape, paint it with color, and find a suitable size position to stick in front of the bird as a beak. Next, make the bird's tail. To do this, just press your hand on the paper and trace the palm print with a pen.

5. Then cut out the handprint and paint it, fold it in half, and stick it to the back of the bird's body. Use the same method to make the bird's feet, cut them out and glue them (the bird's feet need two shapes of the same Changtanyuan, glued to each side separately). Finally, use a paper clip to pass through the small letter and the bird's chest, and tie the rope to the paper clip.

Kites were invented by ancient Chinese working people in the Spring and Autumn Period of the Eastern Zhou Dynasty, more than 2,000 years ago. According to legend, Mo Zhai made a wooden bird out of wood, which was developed for three years, which is the earliest origin of human kites. Later, Lu Ban used bamboo to improve the kite material of Mo Zhai, and it was not until the Eastern Han Dynasty that Cai Lun improved papermaking and began to make kites with paper, called "paper kites".

By the time of the Northern and Southern Dynasties, kites began to become a tool for transmitting information; From the Sui and Tang dynasties, due to the development of the paper industry, the folk began to use paper to frame kites; By the time of the Song Dynasty, kite flying became a popular outdoor activity.

The details of how to make handmade kites for young children are as follows:

Fold the A4 paper in half, draw a creative symmetrical figure on the paper, draw half of it, cut the symmetrical figure with scissors along the line, and then it is a complete butterfly figure. Use colored pens to paint beautiful colors for creative graphics.

Use a sewing needle to thread the cotton thread through the plastic tube. Fix the two plastic pipes into a cross shape, paste the finished cross-shaped skeleton on the back of the kite, and use a sewing needle to pass the cotton thread through the skeleton from the front.

Manual refers to the mass production of non-machine equipment but manual production. At the dawn of industrialization, the term handicraft became synonymous with low productivity and uneven quality.

However, in the era of highly developed industrial production in the modern era, people gradually got tired of the undifferentiated and distinctive products produced by the factory assembly line, and handmade products were revitalized.

Soft-winged kite: the main skeleton is mostly made of relief type, the skeleton has a single layer, double layer and multiple layers, the lift piece (wing) is composed of a main wing strip, and the rear half of the wing is soft, without the main strip attached.

Hard-winged kite: The skeleton is made of two bamboo strips, the edges of the two sides are high, the middle is slightly concave, and the ends of the wings are tilted backwards so that wind energy can escape from the ends of the two wings.

Board kite: that is, a flat kite, the lift piece is the main body, no convex old regret part, the kite has bamboo strips on all sides, is a kind of children's favorite one. Other main types include skewers, three-dimensional, barrel-rowed, and free (characterized by the use of modern new technologies and the length of foreign kites).

Here's how to make kites for toddlers:

1. First of all, carve out the hollow in the middle of the paper tray.

2. Then paste some silk threads or hemp rope and paper strips at the bottom of the paper tray.

3. Then put a laughing wooden stick on the head, which can be a dead branch or chopsticks, and fix the stick with tape.

4. In a few simple steps, a paper plate kite is completed! Let the child run in the wind with it, it is really a very beautiful and ** landscape!

Kite Culture:

Kites originated in China, and the earliest kites were made by the ancient philosopher Mo Zhai. After the advent of the Chinese kite, the Spring Festival was soon used for military needs such as transmitting information and flying over dangers. During the Tang and Song dynasties, due to the emergence of the paper industry, kites were changed from paper paste, which was soon introduced to the folk and became people's leisure and entertainment toys.

Chinese kites have a history of more than 2,000 years. From the traditional Chinese kite, you can see the shadow of auspicious meanings and auspicious patterns everywhere. In the long years, our ancestors not only created beautiful words and paintings that embody the wisdom of the Chinese nation, but also created many patterns that reflect people's yearning and pursuit of a better life and imply auspiciousness.

It gives people the meaning of festivity, auspiciousness and blessing through the image of the pattern; It integrates the appreciation habits of the masses, reflects people's kind and healthy thoughts and feelings, and penetrates the Chinese national traditions and folk customs, so it is widely circulated among the people and is popular among people.

With a history of more than 2,000 years, the kite has been integrated into the traditional Chinese culture, influenced by it, in the traditional Chinese kite, you can see this auspicious meaning everywhere: Fushou Shuangquan, the dragon and the phoenix are auspicious, the hundred butterflies are in spring, the carp jumps the dragon gate, Magu offers longevity, the birds are the phoenix, there are fish all year round, the four seasons are safe, etc., all of these kites show people's yearning and longing for a better life.

Kite flying is a very popular way of outdoor entertainment, all kinds of kites are dazzling, it is better to make your own kite, let's learn to make a high Li Que a simple kite suitable for kindergarten children to play. Qi Zao.

Step 1: Start by cutting a square piece of paper.

Step 2: Fix a bamboo skewer at the midline of the paper.

Step 3: Fold a bamboo skewer into a U-shaped shape and fix it at the other two corners.

Step 4: Cut the remaining paper into long strips and stick them to the tail of the kite.

Step 5: Cut out two short strips of paper and stick them on the flanks.

Step 6: Tie the kite string on the bamboo skewer and you can fly the kite after the summer is shaking, a simple kite is completed, and you can take the kindergarten children to fly the kite.

Start by preparing a tough, thin, and light piece of paper, 50 cm long and 30 cm wide. The paper used to make traditional kites is generally cotton paper, rice paper, leather paper, etc. Then fold the paper into a diamond shape, or draw a diamond shape and cut off the excess ground part to make the paper into a diamond shape.

It can be seen that the bottom of this rhombus (diamond-shaped) is 15 cm, while the upper part is 35 cm.

Continue to prepare two wooden strips, one 30 cm long and the other 50 cm long, fold them to form a cross and tie it with a rope, the top of the cross is 15 cm high, and the lower part is 35 cm high. Then poke two small holes in each of the four corners of the cut paper, so that you can use nylon rope to search and fix the ten crosses of characters on the paper.

Then prepare two nylon threads, as shown in the figure, tie the two ends of a rope to the ends of the short wooden strips, and then tie one end of a slightly longer nylon rope to the ** of this nylon rope. Finally, tie some streamers to the ends of the kite and the tail, and when you are ready to fly, you should attach a bundle of light strings to the end of the nylon rope, so that the kite will fly higher and higher!

Kites are a traditional outdoor activity that most people love, and kites with various patterns in the spring sky always evoke warm memories of our childhood.