Will it be good if the phone is flooded and the screen fails?

If you are using a vivo mobile phone, the liquid inlet treatment method:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on your phone, you can use toilet paper.

and other tools to absorb the water in the gap of the mobile phone and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing: enter the "vivo official website vivo**" APP--my--service outlets after-sales outlets--select provinces and cities to inquire about service center information.

Sorry to hear this news if you are using a Huawei phone.

To reduce your losses, we recommend that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of precision electronic components.

There is a potential risk after water ingress, so please keep your phone turned off.

4.If there is no backup data.

There may be a risk of data loss when repairing. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

The possibility of the mobile phone water screen failure is very small, unless you immediately turn off the power and disassemble it to dry, due to the conductivity of water, it will lead to permanent damage to the mobile phone components for a long time.

Will it be good if the phone is flooded and the screen fails? I don't think so, we should take it and blow it under the hair dryer and blow it slowly, so that he will dry, otherwise, the water in it will not dry out.

Some might be fine. The water in some mobile phones slowly dries up, and it will be fine. However, some mobile phones have a screen failure after being flooded, and even if the water dries, it cannot be recovered.

If the phone is flooded and the screen fails, it may automatically recover and no longer fail, you can also remove the battery and wipe it.

If the mobile phone is flooded, the screen fails to function with a hair dryer, as for whether it is good or not, it depends on the degree, and the motherboard will be burned in serious cases.

That depends on what the situation is. You can take your phone apart and blow dry it before you see if it turns on. If you can't open it, then you should take it directly to the mobile phone store (if it is important).

In this case, you should put it in the dryer to dry as soon as possible, and if you don't have a dryer, you should use an electric hair dryer to dry, and you can't think that you will be good. After a long time, it will break.

Change the screen, it's like this for mobile phones that get into the water.

Don't worry about that, you still have to worry about how to export the data is the most important thing, and then you just need to buy a new phone.

Summary. Hello, if the phone accidentally gets into the water, causing the screen to fail, you can try the following ways to deal with the phone urgently to avoid secondary damage: please take the phone to a dry and ventilated place as soon as possible, and use a dry paper towel or towel to blot the water stains on the surface of the phone.

If the phone is powered on, press the power button to turn it off; If your phone is turned off, don't try to turn it on. Please remove the SIM card and microSD card as soon as possible. Please bring your mobile phone to the after-sales department of the mobile phone brand for testing and processing as soon as possible to avoid unnecessary losses.

Hello, if the phone accidentally gets into the water, causing the screen to fail, you can try the following ways to deal with the phone urgently to avoid secondary damage: please take the phone to a dry and ventilated place as soon as possible, and use a dry paper towel or towel to blot the water stains on the surface of the phone. If the phone is powered on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

Please remove the SIM card and microSD card as soon as possible. Please bring your mobile phone to the after-sales department of the mobile phone brand for testing and processing as soon as possible to avoid unnecessary losses.

Please do not shake or shake your phone frequently after it gets into water to avoid moisture spreading inside the phone. Please do not bake with a hair dryer or stove after water is in, so as to avoid liquid flowing into the phone and damage the phone at high temperatures.

Some mobile phones can be turned on and used normally after simple processing, but mobile phones are composed of delicate electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn them on. During the after-sales repair process, data may be lost, it is recommended to ask the staff how to back up the data.

Hello dear, happy to answer for you.

The screen of the mobile phone needs to be replaced if it gets water. Taking mainstream Android phones as an example, you can generally remove the back cover first, remove the mobile phone motherboard, camera, vibration motor, cable and other parts, remove the battery glue and remove the battery, reinstall the removed parts to a new screen assembly, and glue back to the back cover. Here are the detailed steps:

1. Use a heat gun (or hair dryer) to heat the back cover of the mobile phone, use a suction cup and a triangular pick to cut the adhesive along the seam of the back cover and remove the back cover (pay attention to the pry blade should not draw into the line in the mobile phone);

2. Use a screwdriver and pick blade to remove the mobile phone motherboard, camera, vibration motor, cable and other parts;

3. Disconnect the connection cable between the battery and the mobile phone, roll and extract the battery glue with tweezers, and remove the battery;

4. Reinstall all the removed parts to the new screen assembly, glue back to the back cover, and press and hold the power button to light up the screen.

If the phone is flooded and the screen is out of order, you can take the following measures:

First, put the phone in a dry and ventilated place, and wash the moisture on the surface with a paper towel.

Second, turn off the phone, if it has been turned off, don't try to turn it on.

Third, take out the card slot.

Fifth, if you have the ability to do it yourself, understand the internal structure of the mobile phone, and have the tools, you can disassemble the mobile phone by yourself, deal with the dehydrated part, and replace the damaged part with a new one, but this method is risky.

The above methods are generally divided, that is, to deal with them and send them to the mobile phone repair shop, and the possible adverse consequences that need to be borne by themselves are that they are not properly handled, resulting in more damage, and the consequences that the mobile phone repair shop needs to bear are to spend more money, depending on how they choose.

It shows that after the mobile phone is flooded, the screen has contact problems caused by water ingress, and the materials of the system have been damaged and the malfunction caused by moisture, so it will be good to send them to a professional maintenance point for timely maintenance.

The mobile phone is flooded, the screen is out of order, which means that you are in the water, and it will affect it so seriously if you enter a lot, only obey the arrangement of the teacher and after-sales.

Method 1: Use a hair dryer to blow. Once you have put your phone in the water, do not try to turn it on, but continue to take your phone out of the water and dry it with a hair dryer for the first time.

Once the surface is dry, continue to blow down the gap or slot of your phone, and continue blowing inside to make sure it's completely dry.

Method 2: Use an electric heating pack to dry. If drying with a hair dryer doesn't solve the problem, use an electric heater.

Users need to prepare two dry towels with good water absorption, wrap the phone with towels, and wrap at least three layers. Then use the electric heating treasure to dry it, so that all the water hidden in the mobile phone seeps out, which can solve the problem of the failure of the mobile phone's water inlet screen.

Method 3: Close and dry naturally.

First of all, if water has seeped into your phone, you may not be able to turn it off, and even some buttons may fail at this point.

In addition, not all phones that come into contact with water can dry naturally and return to their previous state of use. For example, small water droplets may enter between the phone's displays, creating water stains and mist on the screen, which can affect the phone's display clarity.

If your phone falls directly into the water, or only the lower part of your phone falls into the water, place your phone vertically. If your phone is flat, place it horizontally, not upside down.

Method 4: Rice dries quickly.

The principle used in this method is that rice is extremely absorbent – burying a phone in the rice for 24 hours will dry it roughly as much as leaving it in the air for 72 hours.

Take out your phone and accidentally drop it into the water. After wiping and absorbing the water with the above method, take the phone out of the water and wipe it clean with a paper towel.

If you can't remove your iPhone's battery, put it in meters and wait for 24 hours; For other types, quickly pull out the battery and put the phone and battery into the meter.

Also note: Before placing the rice in the headphone jack and charging jack for water absorption, tape the jacks before inserting the rice.

If the mobile phone that accidentally gets water after the above treatment still can't turn on and run, then don't worry, send it to the after-sales department. Fortunately, the current study of psychology is not for everyone. It will still be easier for a maintenance professional to disassemble the machine.

Repair, go to the repair shop to repair, the mobile phone water can not be solved by yourself, this requires tool technology, and even accessories.

What should I do if my phone is flooded and the screen fails? You should use a dryer to dry your phone, but if you can't do it, you should go to a mobile phone store to change the screen.