-
If you are using a Huawei mobile phone, it is recommended to turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can check the address of a nearby Huawei Customer Service Center on the Huawei website.
Precautions after the phone gets into the water:
1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.
2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.
3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.
4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.
-
1. Shut down in time: avoid the result of burning the motherboard. 2. Remove water:
Wipe quickly with a clean towel, then use a hair dryer to dry the inside for 20 minutes, pay attention to the distance between the hair dryer tuyere and the mobile phone, so that the wind temperature blowing on the mobile phone is close to normal temperature. 3. After-sales maintenance: If there is residual moisture in the mobile phone, blind driving will cause the mobile phone motherboard to be disconnected.
-
It should be that the cable is corroded after the screen is flooded, resulting in poor contact at a certain point, which needs to be tested and repaired in a place that needs after-sales or professional maintenance. Maybe it's just a matter of cleaning up the card slot of the cable, maybe it's unlikely that you need to replace the screen assembly, because your phone can still be used.
-
Hello, if the phone is in the water, turn on the phone, occasionally there will be a flickering screen, it will not keep flashing, it will be fine after a while, then it will be fine, and you can pay more attention to it in the future.
-
Summary. What to do if the phone gets into the water, the screen flashes and flashes.
Hello dear, it is best to deal with the phone immediately after it gets into the water, and it must be cleaned up before it can be turned on. If not cleaned, the water will short-circuit and will corrode the parts. If the screen flashes and flashes, see whether the screen display flashes or the backlight flashes, this may be burned to the screen, and some of the light control lines are burned, it is recommended to get a professional maintenance to check it, deal with it, judge the reason, I don't want to help you in looking at the repair!
What to do if the phone gets into the water, the screen flashes and flashes.
What should I do if the phone is flooded, the screen flashes Hello dear, it is best to deal with the phone immediately after it gets into the water, and it must be cleaned up before it can be turned on. If not cleaned, the water will short-circuit and will corrode the parts. If the screen flashes and flashes, see whether the screen display flashes or the backlight flashes, this may be burned to the screen, and some of the light control lines are burned, it is recommended to get a professional maintenance to check it, deal with it, judge the reason, I don't want to help you in looking at the repair!
Hello dear, the screen flickering after water ingress is caused by a short circuit in the motherboard or a burned cable. The workaround is as follows; 1.Go to a nearby mobile phone store to test and repair, 2
Send it to the after-sales point for inspection and maintenance [after-sales is more expensive]. There are three definitions of repair, which are replacement parts, pure repair parts, modification according to function, maintenance and restoration, maintenance, maintenance, and repair. Hope it helps!
-
Summary. Hello dear. It is generally difficult to get a splash screen after the mobile phone enters the water, of course, it depends on luck, if the damage is not serious, the water slowly evaporates, and some parts inside are not corroded, maybe it will be good for yourself.
If the water does not evaporate normally and is stored in the mobile phone for a long time, it will have a great impact on the mobile phone, and there is no way but to go to the repair point for repair and remove the broken components as soon as possible.
Hello dear. It is generally difficult to get a flicker screen after the mobile phone enters the water, of course, it depends on luck, if the damage is not serious, the water slowly evaporates, and there is no corrosion of some parts inside, maybe it will be good for yourself. If the water does not evaporate normally and is stored in the mobile phone for a long time, it will have a great impact on the mobile phone, and there is no way.
Dear, it is generally more difficult to restore the mobile phone water splash screen by yourself, and the operation is as follows: If the phone is turned on, please press the power button to turn it off; If the hand judgment machine has been turned off vertically, please do not try to turn it on. Please remove the SIM card and microSD card.
Please bring your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.
If the water ingress screen flicker, it is also possible to return to normal, but the premise is that the water inlet is relatively small and the recovery function of the screen is relatively strong, the waterproof function is relatively strong, to a certain extent, there will be the possibility of recovery, but the potato is stupid, it will not be able to recover, therefore, we quietly argue when using the mobile phone every day, we must pay attention to the waterproof of the mobile phone, to avoid damage to the mobile phone. Lack of hands.
Dear, it is recommended that you take your mobile phone to a mobile phone repair shop for testing and processing, so as not to cause unnecessary losses.
-
The phone is flooded, and the screen flashes to do the following:
1. Please keep the mobile phone away from the water source immediately, and use a paper towel to blot the water stains on the surface of the mobile phone.
2. If the phone has a removable battery, please remove the battery immediately.
3. If the mobile phone is turned on, please press the power button to turn it off; If your phone is turned off, don't try to turn it on.
4. Please remove the SIM card and microSD card.
5. After the mobile phone is naturally dried, please bring the mobile phone to the customer service center for testing and processing as soon as possible (the data may be lost due to the inability to back up) to avoid unnecessary losses.
-
If you use an OPPO phone after water or liquid ingress, in order to avoid further damage, it is recommended to deal with it according to the following methods:
1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;
2.Take out the SIM card and memory card of the mobile phone in time, if the mobile phone is a removable battery, please remove the battery;
3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;
4.If it is not cleaned after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and repair as soon as possible.
Notes:1Please do not turn on or charge the phone after water ingress, at this time, powering may cause short circuit damage to the components of the mobile phone;
2.Please do not try to shake off the water by throwing the phone, this operation may cause the liquid stall to seep into other components;
3.Please do not use a hair dryer or oven to bake the mobile phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (the moisture inside the mobile phone may penetrate into other components of the screen after being heated into water vapor by the hair dryer and other hot machines, which will cause the mobile phone to be damp and damage the electronic components).
Dizzy... Your internal circuit board is burned out.
If the phone gets into the water, it must not be turned on. >>>More
Apple mobile phone water treatment method:
1.Cleaning with alcohol and ultrasonic is available in general repair shops. >>>More
If the phone gets into the water, as long as it is dealt with in time, it will be fine. >>>More
1.The reason why this happens has a lot to do with the phone's own RAM memory. RAM stands for Random Access Memory, which is what we often call a memory module in a computer, and mobile phone RAM is the memory module of a mobile phone as the name suggests. >>>More
Hello, the software can't be opened on the phone, or it keeps flashing, black screen or something. The general situation is that there is a problem with the cache and data of the software, in addition to this, it may be that your **application software is not installed through the official**, and then there is a disorder in the mobile phone system. The last one can basically be ruled out! >>>More