Water leakage in the back of the water dispenser, what s the matter with the water leakage at the bo

Updated on home 2024-07-23
15 answers
  1. Anonymous users2024-02-13

    Water leaking from the safe ozone generator should overflow after the tank is full. It's the bucket on top that has a problem. Drain all the water from your water dispenser.

    Then change to new water. If you are using a water purifier, you should remove the float of the water purifier and clean it with tap water. Remove the cover plate behind the water dispenser, so that it is easy to check the leakage point, which is mostly caused by the connection hose joint is not tightly fastened or the hose is aging and damaged.

  2. Anonymous users2024-02-12

    It's simple, I just figured it out by myself, unplugged the socket and then removed the back cover, found the leaking place, checked the leaking hose interface to see if it was loose or leaking, cut off the leakage and reconnected it, and then tied it with a glue cable. The glued wire is the kind of wire that is tied tighter and tighter with gears.

  3. Anonymous users2024-02-11

    If the house leaks, turn over the tiles, and if the water dispenser leaks, please ask Nuwa.

  4. Anonymous users2024-02-10

    Answer 1: It's because if it's a water dispenser, the water-saving faucet is broken. The solution is: tighten the loose cover, disassemble and clean the impurities, if this still can't prevent the water dispenser from leaking, then the only way to replace the faucet is to replace it with a new one.

    2. Water leakage of internal components of the body, such as silicone pipe rupture hot tank, cold tank weld leakage, electronic ice tank leakage, solenoid valve leakage (pipeline machine), internal overflow caused by water bottle rupture. The solution is: by replacing the broken parts; Use a good and qualified water bottle to solve the problem.

    3. It is for the leakage of the smart seat, if it is the overflow caused by the rupture of the water bottle. The workaround is; Replace the water bottle in good condition, if the float fails when using the water bucket and cannot be effectively sealed, the float needs to be replaced.

  5. Anonymous users2024-02-09

    1. If the water dispenser itself is leaking, there may be more reasons, such as water pipe rupture, perforation of water storage tank, or detachment of the water pipe connection. The state of manifestation is fast water leakage; Constant air ingress can be seen inside the bucket. The probability of water leakage in the water dispenser itself is very low, and the probability of water leakage in the water dispenser itself is less than 10%.

    2. The water dispenser leaks caused by the rupture and air leakage of the bottled water, and the reasons are that there are microscopic cracks in the bottled water; small trachoma; There are gaps in the contact points between the bottle cap and the smart seat of the water dispenser. The state of manifestation is slow water leakage; The air in the bottled water enters the barrel through the gap, so the inlet air state is not visible; If the hot water function is turned on, the bottom half of the water in the barrel will feel warm. This usually happens on the same day or the day after the bottled water is replaced.

    3. The inner tank is corroded and leaked, that is, due to the long use time and the large water alkali, the heating tank of the water dispenser is corroded, and there is trachoma leaking outward.

    4. Improper cleaning will also cause water dispenser to leak. There is a bucket on the water dispenser, and there is a float at the junction of the lower part of the bucket and the water dispenser, and if the float has a cone, it is not clean or the upper and lower movements are not sensitive, and the water in the bucket will continue to flow down.

  6. Anonymous users2024-02-08

    If the bucket is leaking, you should be able to see it. The connection between the heating element and the water outlet is more problematic. In fact, you can see it when you open the iron plate at the back. Because in many cases, the water will leak only when the heat is expanded.

  7. Anonymous users2024-02-07

    When the bucket is filled with water, take the bucket out directly to see if it leaks, so that you can know whether it is the machine or the bucket. I used the Sutar 100 before, and it also leaked, and then I had someone fix it.

  8. Anonymous users2024-02-06

    You first move the water bucket down, there should be water in the water machine, after half a day to see if there is any leakage, if it does not leak, it is caused by the floating under the water purification bucket, if it is not the problem of the water purification bucket, the water pipe joint in the water dispenser is loose, tight, no big problem. What brand of machine are yours?

  9. Anonymous users2024-02-05

    The connection between the bucket and the machine is not very consistent, it is not a matter of ** at all, it is the water purification bucket with trachoma cooperation cracks, I don't believe in it, take a large basin of water to try the water. 100% clean water bucket problem.

  10. Anonymous users2024-02-04

    Reasons for water leakage in the water dispenser:

    1. It may be that the bucket is leaking, you can remove the bucket, dry the surface, after a minute or two, and then wipe the surface with a paper towel.

    2. It may be that the smart seat is leaking, remove the smart seat, check whether there are cracks, and reformulate if damaged.

    3. It may be that the water pipe is damaged or the inner tank is perforated and the water leakage is recommended, and it is recommended to replace the water pipe and parts.

    4. If the heating tank is ruptured and leaking, it is recommended to replace the heating tank.

    Attention should be paid to the use of water dispensers:

    1. First of all, before using the water dispenser, connect the socket and power cord as required, and repair it in time if it is damaged. In addition, the water dispenser should be placed in a well-ventilated place, and there should be no flammable and explosive gases around.

    2. When going out for a long time, cut off the power plug to save electricity safely, and when using it, if you find that the water dispenser is abnormal, you should turn off the source in time and overhaul it.

    3. When carrying the water dispenser, keep it upright, move lightly, and wait for a period of time before using it. In addition, if you find that the bottled water on the water dispenser is exhausted, you need to unplug it, notify the water delivery, and avoid dry boiling.

    4. Before using the water dispenser for the first time, clean each container and then open the drain valve to drain it. And it is best to clean the water dispenser every 3 months. In addition, when using the water dispenser, try to avoid children playing around to prevent burns.

  11. Anonymous users2024-02-03

    Water leakage on the back of a water dispenser is a common fault, and the main reasons include the following:

    1.Leaking water at the water pipe connection: If the water pipe connection of the water dispenser is loose or damaged, it will cause the water pipe to leak, which can lead to a leak on the back.

    2.Leakage protector failure: If the leakage protector of the water dispenser fails or fails, it will cause a short circuit in the circuit, resulting in water leakage on the back.

    3.Drinking water tank leakage: If the drinking water tank is broken or aged, it will cause the water tank to leak, which can lead to a leak on the back.

    4.Pump Problems: If the water pump of the water dispenser fails or fails, it will cause the drinking water tank to not circulate properly, resulting in water leakage on the back.

    5.Water Level Controller Problem: If the water level controller of the water dispenser fails or fails, it will cause the water level of the water tank to be abnormal, resulting in water leakage on the back.

    In view of the problem of water leakage on the back of the water dispenser, we can take the following solutions:

    1.Check whether the connection of the water pipe is tight, if it is found to be loose, it should be re-tightened or the damaged part should be replaced.

    2.Replace the leakage protector to ensure the normal operation of the circuit and avoid short circuit in the circuit.

    3.Replace or repair the drinking water tank to ensure that the water tank is free of water leakage.

    4.Replace or repair the water pump to ensure that the drinking water tank is circulating properly.

    5.Replace or repair the water level controller to ensure that the water level of the water tank is normal and avoid water leakage on the back.

    In short, as long as the water leakage problem on the back of the water dispenser is found and solved in time, the normal operation of the water dispenser can be guaranteed, and the safety and health of users can be ensured at the same time.

  12. Anonymous users2024-02-02

    <><1. What's going on with the leakage at the bottom of the water dispenser

    Leakage at the bottom of the water dispenser caused by broken water bottles: The bottom of the water bottle inside the water dispenser is improperly operated during use, resulting in damage, and at this time, there will be leakage from the bottom, which needs to be disassembled in time for maintenance.

    Leakage at the bottom of the water dispenser due to poor sealing: If the water purification bucket or water parts of the water dispenser are not tightly connected, water will seep from the inside to the bottom, resulting in water leakage at the bottom.

    2. What are the common water leakage situations of water dispensers?

    The problem of water dispenser leakage is relatively common, do not panic when encountering this situation, contact a special maintenance personnel for maintenance after the power and water are cut off. There are a lot of water parts inside the water dispenser, including water purification buckets, water pipes, etc., once there is a problem, it will leak, in addition to the bottom leakage caused by the water bottle damage and sealing problems mentioned above, the water dispenser also has other water leaks, including:

    1. The faucet is leaking

    If there are impurities, scaling and other problems inside, it will also affect the normal use of the faucet, resulting in water leakage.

    2. The valve is aging and leaking

    When the check valve of the water dispenser is used for a long time, it will be aged, and the hoses at both ends are also easy to fall off.

  13. Anonymous users2024-02-01

    The leakage on the water dispenser may be caused by the disconnection of the hoses on both sides of the check valve, causing the water dispenser to leak. In addition, the rupture of the bucket parts and the rupture of both ends of the water dispenser water pipe will lead to water leakage on the water dispenser, and the relevant parts need to be replaced in time.

    There are many reasons for the leakage on the water dispenser, which may be the disconnection of the hose on both sides of the check valve, which will cause the water dispenser to leak, and the check valve can be tightened with nylon to solve the water dispenser leakage.

    If you want to solve the water leakage, you need to replace the sealing ring or check valve in the water dispenser.

    In addition, the two ends of the water dispenser pipe are prone to rupture due to long-term use, resulting in water dispenser leakage, at this time, the water dispenser pipe needs to be adjusted to solve the water leakage.

  14. Anonymous users2024-01-31

    Water dispenser leakage is very common in daily life, and everyone should know more about the causes of its water leakage and prevent it in advance.

    1. Damage to internal components: The rupture of the cold tank of the water dispenser and the damage of the electronic ice tank will lead to the leakage of the water dispenser, so it is necessary to maintain it at ordinary times.

    2. Water bottle rupture: The water dispenser smart seat leaks, mainly due to the rupture of the water bottle, resulting in water overflow and float failure.

    3. Bucket leakage: There are cracks after the bucket collides with hard objects, air leakage, and then water leakage.

    4. The faucet is not connected properly: If the faucet is not connected well before the water is connected, it will also cause the water dispenser to leak during use.

    5. Aging of the check valve of the water dispenser: The check valve of the water dispenser is aging, and the water may overflow, which will lead to the leakage of the water dispenser.

    That's it for "why does the water dispenser leak", I hope the above content will help you!

  15. Anonymous users2024-01-30

    Caused by a leaking bucket. It can be caused by a leaking bucket, you can move the bucket off the water dispenser, carefully check the leakage on the surface, if it is a bucket leakage, even if you change a bucket. Smart seat leakage.

    It is located in the middle of the drinking bucket and the water dispenser, and when placing the water bucket, it is easy to damage the smart seat, resulting in the water dispenser leaking. Heating gall leakage. If water leaks while heating, then it is possible that the heating tank inside is malfunctioning, resulting in water leakage.

Related questions
10 answers2024-07-23

Water dispensers sometimes leak in use, and the reasons for water dispenser leakage can be roughly divided into two points: >>>More

9 answers2024-07-23

1. The leakage on the top of the water dispenser is generally caused by the rupture of the parts of the water purification bucket. The other is that there is a problem with the float of the water purification bucket, such as it cannot be sealed, but this situation generally does not happen. There is also a possibility that the water purification bucket is not properly placed and has air pressure, resulting in water leakage. >>>More

11 answers2024-07-23

It should be that the faucet at the hot outlet is broken, and the faucet is often aging when putting hot water. You can go to the water dispenser store and buy a different one of the same model. >>>More

7 answers2024-07-23

Disassembly:

Unplug the power first, turn on the two switches of the water dispenser, and drain the remaining water in the bucket. >>>More

5 answers2024-07-23

If you buy something, you must want to choose the best one, now some of the quality of the water dispenser is not up to par with the opportunity to flood the market, a few days ago, the General Administration of Quality Supervision, Inspection and Quarantine announced the sampling pass rate of water dispenser products only, nearly forty percent of the water dispenser has potential safety hazards. It is recommended that you still choose a good brand, we buy Trijie, in the top ten brands of the top ten brands introduced on the online introduction of Midea, Angel Angel, Qinyuan, Langmu, Pentium Povos These are very big brands, you can go to the top to understand the introduction.