How to let the computer use the wired network at the same time, you can also use the mobile phone s

1. Connect the ** wire to the hole where the cat is relatively small.

2. Connect the cat and the router with a network cable, one end to the network cable interface on the cat, and the other end to the WAN port on the router.

3. Connect the computer and the router with a network cable, one end to any interface on the router, and the other end to the network cable interface on the computer.

4. Open the browser, enter or, a pop-up dialog box prompts you to log in, and the password is admin.

5. Pop up the setup wizard, next, select PPPoE Next, enter the password given to you by Unicom Next, select Open Next in wireless status, and complete.

6. Select the wireless parameter on the left side of the window, and there is a psk password in the lower middle to set the wireless password.

You can use your laptop to connect to the router, and then set your laptop to wireless through the software, connect your touch to your laptop, so that you can surf the Internet at the same time, and you can search for specific operations on the Internet.

Turn the laptop into no wifi'

The broadband connection is limited because you don't get the IP address, you can get wireless first, wired and wireless can be used at the same time.

If you are restricted, you can manually set an IP address

When the computer is connected to both WiFi and wired networks, the computer will use the wired network as the primary network connection by default. This is because wired networks are more stable and have more bandwidth, making them more suitable for large amounts of data transmission than wifi networks. At the same time, the use of wired networks can also reduce the congestion and interference of the WiFi network, and improve the stability and speed of the network.

However, in some cases, connecting to both WiFi and wired networks may have some special needs and specific uses. For example, in the case of the need to connect to multiple networks at the same time, using wifi and wired connections at the same time can increase the stability and reliability of the network, ensuring the continuity and stability of the network. At the same time, in some cases, WiFi speeds can be faster than wired networks, so using both networks at the same time can take full advantage of their advantages.

In addition to the benefits and applications mentioned above, there are some issues and challenges associated with connecting to both WiFi and wired networks. For example, connecting multiple networks at the same time can cause confusion and conflict in network configurations, resulting in failed or unstable network connections. In addition, if the wired and WiFi networks are connected to the same router, it may lead to IP address conflicts, affecting the speed and effect of the network connection.

If you need to connect to both WiFi and wired networks, it's a good idea to check your computer's network configuration first and make sure that the network connection settings are correct and reasonable. You can use the Network and Sharing Center or other network management tools on your Windows computer to set up and optimize it. At the same time, you can also consider using specialized network management software or hardware to ensure the stability and reliability of your network connection.

In conclusion, connecting wifi and wired networks at the same time can enhance the stability and reliability of the network in specific situations. However, for most users, a wired network is still the preferred way to connect to the network. <>

Mobile phone wifi and computer wireless network can be used at the same time, there can be two ways:

Mobile phone and computer use wifi at the same time. Mobile phone wifi actually relies on the computer's wireless wifi. Therefore, when the computer host has the wifi function, you can use the wifi wireless network at the same time with the wifi function of the mobile phone.

The mobile phone uses wifi, and the computer uses a network cable to connect to the same wifi wireless network. Modern mobile phones generally do not have the interface of network cable to connect to wireless network, and use mobile phone wifi connection, so that the wifi wireless routing function is still set up as method 1 for mobile phone wifi connection. Computers usually have network card interfaces, including laptops.

Connect the network card interface of the computer directly with the wifi wireless network interface, and the mobile phone and computer can use the wifi wireless network at the same time.

Finally, the wifi wireless router should be set up with the network mode through the computer administrator permission (see the manual for details). The broadband network is in PPPoE mode, and the dial-up account and password should be set, and the IP addressing should be set to automatic; The broadband network is in LAN mode, and only IP addressing can be set to automatic addressing. After setting, it must be saved and exited before it will take effect.

If it is not saved, it will be exited directly and will not take effect.

Your router should be able to dial automatically, it's best to set your router with a good account password, so that he can automatically dial for you, so that your computer and mobile phone can be connected to the router to access the Internet, and you don't have to log in again every time you turn on the phone.

Dear Telecom users, Hello!

According to your description, you delete the original driver, don't leave anything when you delete it, and don't keep anything when prompted. It's almost enough to have a new drive. It may be that you can't surf the Internet normally with something you originally loaded. Hope it helps.

If you need to buy a machine, you can go to Anhui Telecom Tianyi store (hundreds of mobile phones are low on the whole network.

Mobile phone with wifi to search for signals, settings, connections. It's the same for computers, but you need a wifi driver, and you can go to the appropriate driver according to your computer brand and model.

First of all, the driver of the next mobile phone, after plugging in the data cable, select "Internet sharing" in the mobile phone

Just use your mobile phone to connect to wifi.

The computer can only use one way to access the Internet, so the computer cannot use the wireless network and limited broadband at the same time, but the computer can set the network priority, take win7 as an example The process is as follows:

1.Right-click on the network icon in the lower-right corner of the desktop and select Open Network and Sharing Center2Click Change adapter settings to open the network connection window.

3.Click Advanced Menu Options for this window to select Advanced Settings4Select Local Connection, click the green arrow on the right, set the local connection to before Wi-Fi connection, and click OK.

The computer can be connected to the wireless and email networks at the same time, but it cannot be used at the same time, and can only be used in one way to access the Internet.

Take setting wired Internet access priority as an example,1Right-click the Broadband Connection icon in the system tray and select Open Network and Sharing Center to open the Network and Sharing Center window.

2.Click the Change Adapter Settings button on the left side of the window to open the Network Connections window.

3.Press the alt shortcut key again to bring up the menu bar, click the menu "Advanced Advanced Settings" to open the "Adapters and Bindings" tab of the "Advanced Settings" dialog box ().

4.In this tab, check "Local Connection", click the green arrow on the right, advance "Local Connection" before "Wi-Fi Connection" and click the "OK" button.