How much caustic soda do you have to use to soak tripe, is it used to boil in boiling water before p

Updated on delicacies 2024-08-09
7 answers
  1. Anonymous users2024-02-15

    Tripe. It is one of the most popular meat ingredients that people eat, it is the stomach of animal cows, but this ingredient has a strong fishy smell, and it is particularly difficult to clean, which is the most headache for many people.

    When they wash the tripe, they are always worried that the tripe will not be clean, so what should they do at this time? In fact, there are certain methods and skills for cleaning tripe, and after mastering them, you can clean the tripe.

    How to wash tripe to be clean.

    1. When cleaning the tripe, you must turn it over, use scissors to reduce the fat in it and then clean it, so that it can be cleaned, and after the fat is removed, you must take an appropriate amount of alkaline noodles.

    Apply to the surface of the tripe and rub it repeatedly with your hands, saying 3 to 5 minutes after rinsing with water.

    2. Take an appropriate amount of edible salt.

    Put it together with flour and mix thoroughly, apply it on the surface of the tripe and continue to knead, so that after the flour and salt are in contact with the surface of the tripe, all the dirt on its surface can be taken off, and the fishy smell of the tripe can be removed, and then washed with water after four or five minutes of repeated kneading, and finally smeared with white vinegar on the tripe, rubbed repeatedly for a while, and washed with water after three minutes, then the clean and odorless tripe will be washed.

    Step-by-step tutorial for cleaning tripe.

    1. Soak the purchased fresh beef in cold water for 1 2 hours, change the water once in the middle, then take out the soaked tripe, divide it with a knife, turn it over from different openings, and rinse it repeatedly under running water to wash off the impurities and mucus in it.

    2. Put the washed tripe on the plate, put an appropriate amount of cornmeal, and rub it vigorously, so that all the remaining mucus on the surface of the tripe can be scrubbed clean, and finally rinsed with water, and then add an appropriate amount of edible salt or edible alkaline noodles, smear it on the surface of the tripe, rub it repeatedly with your hands, and wait until 5 minutes later, put the washed tripe under running water and rinse it clean, so that the washed tripe is clean and has no peculiar smell, and you can cook it according to your own needs after washing.

    3. When cleaning tripe, if you don't use cornmeal to rub it, you can also put in an appropriate amount of coarse salt to rub the tripe, which can not only remove the mucus on the surface of the tripe, but also remove the fishy smell of oil.

  2. Anonymous users2024-02-14

    According to my personal understanding, to soak tripe, you have to use caustic soda to leave it on the belly, knead the caustic soda and then boil it in boiling water. This makes the tripe more likely to be soft.

  3. Anonymous users2024-02-13

    There are two types of hairy belly, traditional and new, one is alkaline water hair, also known as water hair; The other is the biological enzyme hair method. Because the former is much less costly than the latter, the former method is used more in practice. Hair tripe with alkaline water is actually to add dry hair belly to alkaline water and soak it to make it swell.

    1. Smear tripe with coarse salt and flour

    2. Repeated kneading, flour can play a role in bringing away the dirt on the tripe, and the particles of coarse salt have this effect;

    3. Smear tripe with vinegar to remove odors

    4. Wash the tripe with water, clean it and put it on a plate.

    5. Put the cleaned tripe on a plate.

  4. Anonymous users2024-02-12

    Answer: Hello, it is advisable to use raw alkaline water when making hairy tripe, and the alkaline surface and water should be evenly formed in a ratio of 2:1. It should be noted that if the proportion of alkaline noodles is too small, a large amount of alkaline water is needed when making hairy tripe, which is very laborious;However, if the addition ratio is too large, it is easy to solidify the alkali surface after the water volatilizes, and it cannot be used.

    Hope it helps.

    Question: How much alkaline noodles and salt do you need for a hundred catties of belly.

    Ask a good question, thank you.

    Ask a good question. Answer: If it is edible salt, 100 catties will need 20 catties of salt, oh hello, the time to soak tripe with edible is 8 10 hours, and I don't know much about the time to soak it with edible salt, I'm sorry.

    The time to soak the tripe with alkali is.

    Hope it helps.

    Good luck with your business

    If you are satisfied with this service, please give a like, thank you

  5. Anonymous users2024-02-11

    Hello, glad to answer for you. How to use alkali to make tripe 100 kg of tripe with 25 kg of alkali The production method is as follows: 1. Choose hairy tripe.

    Dry buffalo tripe with a relatively dry salt should be selected for hairdressing. Due to the lack of water inside the hairy belly, if you directly put in alkaline water for the hair cover, it is easy to cause the epidermis to thin and fall off, but the inner layer is not fully swollen, so the hairy belly should be boiled with boiling water before adding alkaline water. With stuffy rock 2, deal with hairy belly.

    According to the ratio of 1 kilogram of hairy tripe and 1 kilogram of water, after the water is boiled, the hairy belly that tears off the oil tendons is put into the boiling water, and the hairy belly is turned evenly with a utensil, when the water boils again, the hairy belly feels slightly harder than before entering the pot and is slightly lamp-like, you can take out the hairy belly and put it in a plastic bucket, rinse it with cold water, and then use cold water to flood the hairy belly. 3. Add alkaline water. Pour the alkaline water into the boiled and swollen hairy belly mixed with cold water, stir it evenly with a wooden stick, and touch the hairy belly slightly slippery with your hands, which proves that the concentration of alkaline water has reached the standard.

    Under normal circumstances, each plastic bucket that can be filled with 25 kg of water, if it is put into the hairy belly and filled with water, 2 and a half stir-fried spoons of alkaline water should be added, but the specific situation should be identified by touching the hairy belly. 4. Keep it properly. If the hairy tripe is not properly handled, it will deteriorate, taste and rot, so that the previous efforts will be wasted.

    Therefore, when the hairy tripe is prepared and the alkali is removed, the hairy tripe should be flooded with water, the water should be changed once a day in winter, and the water should be changed twice a day in summer, and after each water change, a slight alkali should be put in for maintenance (the volatilization of alkali in summer is faster than in winter, so a little more alkaline water should be put in summer), so as to ensure that the hairy belly does not deteriorate, looks fresh, and tastes crisp.

  6. Anonymous users2024-02-10

    Summary. Hello. Kiss. The ratio of edible alkali to hairy tripe is 2 to 1, and the ratio of edible alkali should be just right, so that the taste of hairy tripe will be good.

    Hello. Kiss. The ratio of edible alkali to hairy tripe is 2 to 1, and the ratio of edible alkali should be just right, so that the taste of hairy tripe will be good.

    How much alkali to put in 100 tripe.

    What is 2 to 1?

    Alkaline water is two kinds of alkaline water and hot alkaline water, the material soaked in alkaline water is more slippery, and when identifying the concentration of alkaline water soaked in hairy tripe, it is determined by the smoothness of its alkaline water, so it is advisable to use raw alkaline water when making hairy tripe, and the alkaline surface and water are evenly formed in a ratio of 2:1. It should be noted that if the proportion of alkaline noodles is too small, a large amount of alkaline opening and closing water is required when making hairy tripe, which is very laborious; However, if the addition ratio is too large, it is easy to solidify the alkali surface after the water volatilizes, and it cannot be used.

    How many taels of alkali are used for 100 catties of tripe?

    Or a few pounds of alkali.

    Hello. Kiss. The ratio of edible alkali to hairy belly is 2 to 1, and if the hairy belly is 100 kilograms, it will cost 200 kilograms of edible alkali.

    Can it be used? Yes, dear.

    Can you still eat 100 tripe with 200 alkali?

    Hello, dear, yes, this is not using edible alkali, and it should be cleaned with water when washing.

  7. Anonymous users2024-02-09

    Food-grade caustic soda soaked tripe can be eaten. Caustic soda is the common name of sodium hydroxide, commonly known as caustic soda, which is extremely soluble in water and releases a large amount of heat when dissolved. If you come into direct contact with a high concentration of caustic soda, it is very corrosive and will definitely hurt your hands.

    But don't be afraid of it because it's corrosive. Being corrosive doesn't necessarily mean it's harmful to people, and that's not why it can't be used in food production. Food-grade sodium hydroxide is a food processing aid, which is generally used in the washing industry such as container cleaning and the oil industry, and cannot be used to process food.

    Dear, light consumption is OK, it is recommended not to use it for a long time!

Related questions
14 answers2024-08-09

Tips for soaking dried shiitake mushrooms quickly.

Add a spoonful of sugar to the water in which the dried shiitake mushrooms are soaked, and the dried shiitake mushrooms will be ready in no time. >>>More

14 answers2024-08-09

Method steps.

How to soak dried bamboo shoots. >>>More

11 answers2024-08-09

How to soak dried fish gelatin

1. Dried fish gelatin can be soaked directly with water, and when needed, you can soak the intervention glue purchased back in clean water, the amount of water must not be over, and then take it out after it absorbs water and expands and becomes soft, this process takes about 24 hours. >>>More

19 answers2024-08-09

The steps of how to soak white fungus are as follows:1.Soak in cool water: >>>More

8 answers2024-08-09

1. Warm water of bird's nest.

This warm water is not the same warm water, the warm water here refers to the mineral water at room temperature, which is the most commonly used method. Find a deeper container, put in the bird's nest, add an appropriate amount of pure water, soak at room temperature for 3-5 hours, the soaking time is different in different regions, thick places such as bird's nest can be soaked until slightly soft and tear it open by hand, continue to soak. >>>More