How to fix a blocked vacuum cleaner? What should I do if the vacuum cleaner won t open

1. If the interface of the hose, suction nozzle and dust bag is blocked, the vacuum cleaner should be disassembled, the dust in the hose should be shaken off, the blockage at the suction nozzle or dust bag should be cleaned, or the dust bag should be replaced; 2. The filter is blocked, and the filter bag made of flannel cloth is easy to get dust and blocked, at this time, as long as you shake the ash frame to shake off the dust on the flannel bag, or clean it with water. It is recommended to go to the "Clean Dust House" to check out more about vacuum cleaners.

Generally speaking, the problem with household vacuum cleaners when using them is that they do not suck. Most of the time, the air duct of the vacuum cleaner is blocked and deformed. This is mainly because when using it, it is not noticed that it is best to clean up some relatively large pieces of stolen goods first, which causes the vacuum cleaner to be clogged and cannot be vacuumed.

So, if this happens to the vacuum cleaner at home, how to solve it?

There are many reasons for the blockage, and it may be due to the problems listed below:

Check the nozzle and hose first. The interface of the bag or the micropores of the bag may be blocked. If this is the case, you need to disassemble the vacuum cleaner, carefully shake off the dust in the hose, and then clean the blockage at the suction nozzle or dust bag mouth, or replace the dust bag directly.

It is possible that the dust filter bag is covered with dust. There is a flannel bag in the filter, which can easily get dirt or clog. This problem is the simplest, just shake the ash rack and shake the dust off.

It is possible that there is no tight seal between the top cover and the middle case of the vacuum cleaner. Therefore, you can check whether there are cracks between the middle shell and the top cover, and whether the screws are tightened.

It is also possible that there is no seal between the vacuum cleaner and the motor, and you can check the surroundings of the motor to see if the screws are loose and whether the gasket is defective.

It is also possible that Yang Chen's rotating brush bristles are seriously worn, so although the motor is still rotating, the rotating brush cannot be dusted, so the suction is very weak. This allows you to remove the old brush and adjust the position of the brush. Keep the bristles of the rotating brush close to the ground.

If the wear is too severe, the brush can be replaced.

It is also possible that the blades of the fan are not properly fixed. When the fan blades always slide on the motor shaft, this will also affect the effectiveness of vacuuming. In this case, the positioning screws are tightened again.

Therefore, in the process of using the vacuum cleaner, if you find that there is a foreign object blocked at the mouth of the straw, you must immediately turn off the machine and check again, and remove the foreign body before continuing to work.

Summary. 1. Open the vacuum cleaner to see if the leaves of the vacuum cleaner are still working on the main shaft of the motor, if you find that there is a relaxation phenomenon, you can take the toolbox at home, take out the corresponding tools to tighten the screws that are relaxed, and you can solve this problem.

2. If the top cover and the middle cover of the vacuum cleaner are not sealed enough, that is, the sealing is not good enough, it is necessary to see if there are cracks on the surface of this place or whether the corresponding screws have fallen off.

3. When the vacuum cleaner used in the home is in normal operation, the garbage on the ground will be sucked into its own dust bag, and after a long time, there may be a blockage of the main pipe of the vacuum cleaner, and when the main pipeline is blocked, then the vacuum cleaner will not be able to suck it up. Regularly inspect or clean the main pipes to prevent them from being blocked from normal use.

What to do if the vacuum cleaner can't be sucked How to solve the problem that the vacuum cleaner is not working.

How to solve the problem that the vacuum cleaner is not working?

The vacuum cleaner sends the dust to the dust bag through the vacuum pipe, so during the work of the vacuum cleaner, it is inevitable that it will vacuum some things that are easy to clog, such as larger hard substances and strips.

What should I do if the vacuum cleaner won't open

1. Open the vacuum cleaner to see if the leaves of the vacuum cleaner are still working on the main shaft of the motor, if you find that there is a relaxation phenomenon, you can take the toolbox at home, take out the corresponding tools to tighten the screws that are relaxed, and you can solve this problem. 2. If the top cover and the middle cover of the vacuum cleaner are not sealed enough, that is, the sealing is not good enough, which requires Sakura to see if there are cracks on the surface of this place or whether the corresponding screws have fallen off. 3. When the vacuum cleaner used in the home is running normally, the garbage on the ground will be sucked into its own dust bag, and after a long time, there may be a blockage of the main pipe of the vacuum cleaner.

Regularly inspect or clean the main pipes to prevent them from being blocked from normal use. What to do if the vacuum cleaner can't be sucked up What should I do if the vacuum cleaner is not workingHow to solve the problem that the vacuum cleaner is not working? The vacuum cleaner is to send the dust to the dust bag through the vacuum pipe, so during the work of the vacuum cleaner, it is inevitable that it will vacuum some things that are easy to block, such as:

A large hard substance and a strip.

The vacuum cleaner won't turn on, I forgot.

Hold the red zipper on the side of the cyclone. At this time, the fuselage can pull the cyclone out of the slag cluster, and when the cyclone is pulled to an abnormal sound, the dust bin lid will automatically open. If the above method does not work, please re-check the Dyson V8 vacuum cleaner for damage, or ask a professional to come and repair it.

The one above is how the Dyson V8 dust bin is opened.

Different styles are also different ways to open, you can take a look at the manual.

What's your name for this one?

You can give it a try in this piece.

If it doesn't work, it really won't be opened.

Generally speaking, we bought a household vacuum cleaner to vacuum garbage, but in fact, many things can't be sucked, and you may not know very well, so today we will discuss what the vacuum cleaner can't suck, remember to take a closer look, and don't do anything that damages the vacuum cleaner.

Most of the vacuum cleaners we use now are handheld vacuum cleaners, and we should know that handheld vacuum cleaners can't suck liquids, including kitchen waste and wet garbage, and can only suck some dry garbage. However, the bucket vacuum cleaner can absorb liquids, which is very suitable for large areas of the home or places with a lot of garbage.

The second is that the handheld vacuum cleaner cannot suck metal substances, one is that it may scratch the dust cup, and the other is that it will rotate at the height of the dust cup, which may affect the damage of the filter screen and cause the household vacuum cleaner to be unable to use normally.

The third is large-particle objects, our pipes are relatively narrow, large-particle objects will block the pipes, and the second is that they cannot rotate at high speed when sucked in. However, like a finger butler vacuum cleaner, it can absorb some nuts and melon seed skins, which is a very powerful thing in a household vacuum cleaner.

What can't be sucked by the vacuum cleaner, do you understand, today is mainly for handheld vacuum cleaners, if it is other styles of vacuum cleaners, it may be different, so remember to read the details when you buy.

How to solve the problem of vacuum cleaner not vacuuming:

1. Check the hose and nozzle: the interface of the dust bag or the micropores of the dust bag may be blocked. At this time, the vacuum cleaner should be disassembled, the dust in the hose should be shaken off, the blockage at the suction nozzle or dust bag should be removed, or the dust bag should be replaced.

2. It may be that the dust bag is covered with dust: the filter has a dust bag made of flannel cloth that is easy to get dust and blocked, so as long as you shake the ash frame to shake off the dust on the flannel bag.

3. It may be that the seal between the top cover and the middle case of the vacuum cleaner is not tight. Check whether there are cracks between the top cover and the middle shell, and whether the screws are tightened.

4. It may be that the seal between the motor and the vacuum cleaner is not tight. The screws and gaskets around the motor should be checked, and if they are found to be loose, they should be tightened and tightened, and the gasket defects should be replaced in time.

5. It may be that the dusty brush bristles have been worn, and although the motor rotates, the brush cannot be dusted, so the suction is very weak. At this time, the rotating brush is disassembled, and the position of the rotating brush assembly is adjusted, so that the bristles of the rotating brush are close to the ground, and the rotating can fully dust up. If the wear is severe, the brush can be replaced with a new one.

6. It may be that the fan blades are not fixed tightly. When the fan blades slide on the motor shaft, it also affects the suction effect. The positioning screws of the fan blades should be tightened.

If the vacuum cleaner motor is damaged and the suction power of the vacuum cleaner is reduced, you can choose to replace the motor with a new one, or replace the fuse on the motor. The specific cause of the motor noise can be checked, and the motor fan blades become loose and need to be tightened. Do not blindly disassemble the vacuum cleaner if it is damaged, it is easy to affect the service life of the vacuum cleaner, and you can ask professionals to repair it.

The suction power of the vacuum cleaner becomes smaller because the fuse in the motor is burned out, and the fuse can be replaced with a new one.

The noise of the vacuum cleaner may loosen the original part of the fixed vacuum cleaner, and it is necessary to find the loose part and tighten it with the right wrench. The loosening of the motor fan will also cause the noise of the sucker to become louder, and the position of the motor fan blades can be readjusted to reduce the noise.

Vacuum cleaner belongs to the household appliances book reputation, if there is a problem do not blindly repair and disassemble, and then installed is likely to be unable to operate, it is best to choose to let professional maintenance personnel repair, you can also return the vacuum cleaner to the factory for maintenance, safer, but also can extend the service life.

The common fault repair methods of vacuum cleaners are as follows:

The reasons for the motor not rotating are none other than circuit breaks, poor contact, and damage to the motor itself. Due to the relatively simple circuit of the general vacuum cleaner, it is not difficult to find the most broken circuit or poor contact, usually the fault of the power switch, fuse tube, power reel or poor welding connection is common.

If there is no problem with the check circuit, and the fuse tube comm is pure and normal, then the fault is on the motor, generally the motor has a broken wire or poor contact. Broken wire usually occurs on the lead line of the motor, most of which can be seen by the naked eye, if it is difficult to judge, it can be tested with a multimeter, if the suction power is too small, it may be due to the poor vacuum duct.

Precautions for the use of vacuum cleaners

Before using the vacuum cleaner, check whether the fuse of the power supply can carry the current of the vacuum cleaner's start-up and operation, and the general product manual has this explanation. Turn off the power switch of the vacuum cleaner, insert the power plug into the socket of the cigarette lighter of the car, start the car first, and then start the power switch of the vacuum cleaner to start the operation.

When the dust reaches a certain level or needs to be cleaned after use, press the clip on the dust cover to open the dust cover to remove the dirt. The working principle of the vacuum cleaner is to form a vacuum in the host through the high-speed rotation of the motor, and use the resulting high-speed airflow to suck in garbage from the suction inlet.