Is the main chip fan of the motherboard always quite swinging?

This is how the fan will make a loud noise after using it for a period of time, and there will be a lot of dust, due to the temperature and aging of the fan, etc. Hopefully, change the fan before you can't stand the noise, after all, it's not much like the original CPU fan.

In that case, you should try a different fan. At 6:22, keep writing.

It may be a problem with the fan, if there is power in the fan line when the fan does not rotate, then there must be a problem with the fan.

This kind of motherboard generates a lot of heat, and the fan is not strong, and it is easy to accumulate dust, that is, after repairing the fan, the same problem will still occur, and the defects of the motherboard itself must be changed to solve the board type.

It is recommended to go to a computer repair shop to find a professional person to check the hardware configuration for you, repair and replace the system hardware, it is easy to have problems when it is generally aging, and it is OK to replace it with a new one.

This is a dispersion failure, it is recommended that you change to a dispersion on it.

The chairman of the motherboard and the station are closed, it is always stopped, there is a problem, and the fan is used for too long.

The motherboard has an open architecture. Most motherboards have 6-15 expansion slots for PC peripherals to plug in control cards (adapters). By replacing these plug-in cards, the corresponding subsystems of the microcomputer can be partially upgraded, so that manufacturers and users have greater flexibility in configuring models.

In conclusion, the motherboard plays a pivotal role in the entire microcomputer system. It can be said that the type and grade of the motherboard determine the type and grade of the entire microcomputer system, and the performance of the motherboard affects the performance of the entire microcomputer system [3].

Motherboard structure. The so-called motherboard structure is a general standard formulated according to the layout and arrangement of each component on the motherboard, size, shape, power supply specifications, etc., and all motherboard manufacturers must follow. The motherboard structure is divided into AT, BABY-AT, ATX, MICRO ATX, LPX, NLX, FLEX ATX, E-ATX, WATX, and BTX.

Among them, AT and BABY-AT are old motherboard structures many years ago and have been eliminated; The LPX, NLX, and Flex ATX are variants of ATX, which are mostly seen in foreign brand machines, but are not rare in China; E-ATX and W-ATX are mostly used in server workstation motherboards; ATX is the most common motherboard structure on the market, with many expansion slots, and the number of PCI slots is 4-6, and most motherboards adopt this structure; Micro ATX, also known as Mini ATX, is a simplified version of the ATX structure, which is often referred to as a "small board", with fewer expansion slots, and the number of PCI slots is 3 or less, mostly used in brand machines and equipped with small chassis; BTX, on the other hand, is the latest generation of motherboard architecture developed by Intel, but it was abandoned before it became popular and continued to use ATX. [2]

Chipset.

It may be dusty, so if it doesn't work, just change it, and mine is the same, just change it.

A little looser screws might be better.

You see if the fan is loose or not. and fan blades to see if they rub against other foreign objects. If it still doesn't work.

It is recommended to change to another one as soon as possible. It is not easy to pull if the heat dissipation is not good, causing other unnecessary troubles. Sissy.

This kind of fan is not very expensive. Good dozen bucks. A few dollars is generally enough.

The first thing to consider is your fan problem, because you can turn it with your hand, it is recommended to change the fan, and there is also a possibility that the chip that controls the heat dissipation is broken.

If you add the heat generated by the chip on the motherboard, you need to install a wind fan, and the motherboard of your classmate's computer may not generate much heat, so you need to install a fan, which reduces the cost and reduces the burden on consumers.

Some of the good motherboards also add a fan to stop the south bridge on Xingchang, which proves that the motherboard works more stably.

Having a fan generally means that your motherboard is more advanced.

Your motherboard chip is hot.

Remove the fan to clean the dust stains and drop 2 drops of oil.

Is the Super Bunny accurate? >> 6000 rpm, 6000 rpm, I can't hear the sound! Generally around 2000 rpm is good! Beiqiao is not any other big heater

Six thousand rpm, how is it possible, how can there be such a fast fan. It must be that the detection is not accurate.

Does the rabbit report the CPU fan speed?

Since it indicates that the fan speed of the chip is slow or decreasing, you should replace the CPU fan with a new one or add some sewing oil to the fan bearing.

Maybe I'm ignorant, most of the northbridges only have heat sinks, and the northbridge fans have heard of it for the first time, let alone 6000 rpm.

What else to measure! Open the case directly! You can tell with your eyes if it's turning normally!

Let's see if there's too much ash! Clean up the dust inside! If you find that there is vibration or deviation! Hurry up and change the fan handle!

If it does not rotate, the temperature will rise, and the chip will burn out if it exceeds the normal operating temperature.

You tell me? It's better to go for a different one, and it's not expensive.

It's greasy, it can't turn anymore, it must be changed, or it will burn. If you can't burn, it will crash and restart.

It may have taken a long time.

No oil. Or maybe it's too gray.

If the air duct inside your case is good.

You can do it without installing a fan.

But for the sake of stability and security.

It's better to install a new one.

Overclocking three flowers is flawless.

30 pieces.

Replaced. If you can, find a way to take a picture of ** up. Help you identify what kind of radiator it is.